19 C.F.R. § 190.51 Completion of drawback claims.
(a) General—(1) Complete claim. Unless otherwise specified, a complete drawback claim under this part will consist of the successful electronic transmission to CBP of the drawback entry (as described in paragraph (a)(2) of this section), applicable Notice(s) of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback on CBP Form 7553, applicable import entry data, and evidence of exportation or destruction as provided for under subpart G of this part.
(2) Drawback entry. The drawback entry is to be filed through a CBP-authorized electronic system and must include the following:
(i) Claimant identification number;
(ii) Broker identification number (if applicable);
(iii) If requesting accelerated payment under § 190.92, surety code and bond type (and, for single transaction bonds, also the bond number and amount of bond);
(iv) Port code for the drawback office where the claim is being filed;
(v) Drawback entry number and provision(s) under which drawback is claimed;
(vi) Statement of eligibility for applicable privileges (as provided for in subpart I of this part);
(vii) Amount of refund claimed for each of relevant duties, taxes, and fees (calculated to two decimal places);
(viii) For each designated import entry line item, the entry number and the line item number designating the merchandise, a description of the merchandise, a unique import tracing identification number(s) (ITIN) (used to associate the imported merchandise and any substituted merchandise with any intermediate products (if applicable) and the drawback-eligible exported or destroyed merchandise or finished article(s)), as well as the following information for the merchandise designated as the basis for the drawback claim: The 10-digit HTSUS classification, amount of duties paid, applicable entered value (see 19 CFR 190.11(a)), quantity, and unit of measure (using the unit(s) of measure required under the HTSUS for substitution manufacturing and substitution unused merchandise drawback claims), as well as the types and amounts of any other duties, taxes, or fees for which a refund is requested;
(ix) For manufacturing claims under 19 U.S.C. 1313(a) or (b), each associated ruling number, along with the following information: Corresponding information for the factory location, the basis of the claim (as provided for in § 190.23), the date(s) of use of the imported and/or substituted merchandise in manufacturing or processing (or drawback product containing the imported or substituted merchandise), a description of and the 10-digit HTSUS classification for the drawback product or finished article that is manufactured or produced, the quantity and unit of measure for the drawback product or finished article that is manufactured or produced, the disposition of the drawback product or finished article that is manufactured or produced (transferred, exported, or destroyed), unique manufacture tracing identification number(s) (MTIN) (used to associate the manufactured merchandise, including any intermediate products, with the drawback-eligible exported or destroyed finished article(s)), and a certification from the claimant that provides as follows: “The article(s) described above were manufactured or produced and disposed of as stated herein in accordance with the drawback ruling on file with CBP and in compliance with applicable laws and regulations.”;
(x) Indicate whether the designated imported merchandise, other substituted merchandise, or finished article (for manufacturing claims) was transferred to the drawback claimant prior to the exportation or destruction of the eligible merchandise, and for unused merchandise drawback claims under 19 U.S.C. 1313(j), provide a certification from the client that provides as follows: “The undersigned hereby certifies that the exported or destroyed merchandise herein described is unused in the United States and further certifies that this merchandise was not subjected to any process of manufacture or other operation except the allowable operations as provided for by regulation.”;
(xi) Indicate whether the eligible merchandise was exported or destroyed and provide the applicable 10-digit HTSUS or Department of Commerce Schedule B classification, quantity, and unit of measure (the unit of measure specified must be the same as that which was required under the HTSUS for the designated imported merchandise in paragraph (viii) for substitution unused merchandise drawback claims) and, for claims under 19 U.S.C. 1313(c), specify the basis as one of the following:
(A) Merchandise does not conform to sample or specifications;
(B) Merchandise was defective at time of importation;
(C) Merchandise was shipped without consent of the consignee; or
(D) Merchandise sold at retail and returned to the importer or the person who received the merchandise from the importer;
(xii) For eligible merchandise that was exported, the unique export identifier (the number used to associate the export transaction with the appropriate documentary evidence of exportation), export destination, name of exporter, the applicable comparative value pursuant to § 190.11(b) (see § 190.22(a)(1)(ii), § 190.22(a)(2)(ii), or § 190.32(b)) for substitution claims, and a certification from the claimant that provides as follows: “I declare, to the best of my knowledge and belief, that all of the statements in this document are correct and that the exported article is not to be relanded in the United States or any of its possessions without paying duty.”;
(xiii) For eligible merchandise that was destroyed, the name of the destroyer and, if substituted, the applicable comparative value pursuant to § 190.11(c) (see § 190.22(a)(1)(ii), § 190.22(a)(2)(ii), or § 190.32(b)), and a certification from the claimant, if applicable, that provides as follows: “The undersigned hereby certifies that, for the destroyed merchandise herein described, the value of recovered materials (including the value of any tax benefit or royalty payment) that accrues to the drawback claimant has been deducted from the value of the imported (or substituted) merchandise designated by the claimant, in accordance with 19 U.S.C. 1313(x).”;
(xiv) For substitution unused merchandise drawback claims under 19 U.S.C. 1313(j)(2), a certification from the claimant that provides as follows: “The undersigned hereby certifies that the substituted merchandise is unused in the United States and that the substituted merchandise was in our possession prior to exportation or destruction.”;
(xv) For NAFTA and USMCA drawback claims provided for in subpart E of parts 181 and 182, the foreign entry number and date of entry, the HTSUS classification for the foreign entry, the amount of duties paid for the foreign entry and the applicable exchange rate, and, if applicable, a certification from the claimant that provides as follows: “Same condition—The undersigned certifies that the merchandise herein described is in the same condition as when it was imported under the above import entry(s) and further certifies that this merchandise was not subjected to any process of manufacture or other operation except the allowable operations as provided for by regulation.”; and
(xvi) All certifications required in this part and as otherwise deemed necessary by CBP to establish compliance with the applicable laws and regulations, as well as the following declaration: “The undersigned acknowledges statutory requirements that all records supporting the information on this document are to be retained by the issuing party for a period of 3 years from the date of liquidation of the drawback claim. All required documentation that must be uploaded in accordance with 19 CFR 190.51 will be provided to CBP within 24 hours of the filing of the drawback claim. The undersigned acknowledges that a false certification of the foregoing renders the drawback claim incomplete and subject to denial. The undersigned is fully aware of the sanctions provided in 18 U.S.C. 1001, and 18 U.S.C. 550, and 19 U.S.C. 1593a.”
(3) Election of line item designation for imported merchandise. Merchandise on a specific line on an entry summary may be designated for either direct identification or substitution claims but a single line on an entry summary may not be split for purposes of claiming drawback under both direct identification and substitution claims. The first complete drawback claim accepted by CBP which designates merchandise on a line on an entry summary establishes this designation for any remaining merchandise on that same line.
(4) Limitation on line item eligibility for imported merchandise. Claimants filing substitution drawback claims under part 190 for imported merchandise associated with a line item on an entry summary if any other merchandise covered on that entry summary has been designated as the basis of a claim under part 191 must provide additional information enabling CBP to verify the availability of drawback for the indicated merchandise and associated line item within 30 days of claim submission. The information to be provided will include, but is not limited to: summary document specifying the lines used and unused on the import entry; the import entry summary, corresponding commercial invoices, and copies of all drawback claims that previously designated the import entry summary; and post summary/liquidation changes (for imports or drawback claims, if applicable).
(b) Drawback due—(1) Claimant required to calculate drawback. Drawback claimants are required to correctly calculate the amount of drawback due. The amount of drawback requested on the drawback entry is generally to be 99 percent of the duties, taxes, and fees eligible for drawback. (For example, if $1,000 in import duties are eligible for drawback less 1 percent ($10), the amount claimed on the drawback entry should be for $990.) Claims exceeding 99 percent (or 100% when 100% of the duty is available for drawback) will not be paid until the calculations have been corrected by the claimant. Claims for less than 99 percent (or 100% when 100% of the duty is available for drawback) will be paid as filed, unless the claimant amends the claim in accordance with § 190.52(c). The amount of duties, taxes, and fees eligible for drawback is determined by whether a claim is based upon direct identification or substitution, as provided for below:
(i) Direct identification. The amounts eligible for drawback for a unit of merchandise consists of those duties, taxes, and fees that were paid for that unit of the designated imported merchandise. This may be the amount of duties, taxes, and fees actually tendered on that unit or those attributable to that unit, if identified pursuant to an approved accounting method (see 19 CFR 190.14).
(ii) Substitution. The amount of duties, taxes, and fees eligible for drawback pursuant to 19 U.S.C. 1313(b) or 19 U.S.C. 1313(j)(2) is determined by per unit averaging, as defined in § 190.2. The amount that may be refunded is also subject to the limitations set forth in § 190.22(a)(1)(ii) (manufacturing claims) and § 190.32(b) (unused merchandise claims), as applicable.
(2) Merchandise processing fee apportionment calculation. Where a drawback claimant requests a refund of a merchandise processing fee paid pursuant to 19 U.S.C. 58c(a)(9)(A), the claimant is required to correctly apportion the fee to that imported merchandise for which drawback is claimed when calculating the amount of drawback requested on the drawback entry. This is determined as follows:
(i) Relative value ratio for each line item. The value of each line item of entered merchandise subject to a merchandise processing fee is calculated (to four decimal places) by dividing the value of the line item subject to the fee by the total value of entered merchandise subject to the fee. The result is the relative value ratio.
(ii) Merchandise processing fee apportioned to each line item. To apportion the merchandise processing fee to each line item, the relative value ratio for each line item is multiplied by the merchandise processing fee paid.
(iii) Amount of merchandise processing fee eligible for drawback per line item. The amount of merchandise processing fee apportioned to each line item is multiplied by 99 percent to calculate that portion of the fee attributable to each line item that is eligible for drawback.
(iv) Amount of merchandise processing fee eligible for drawback per unit of merchandise. To calculate the amount of a merchandise processing fee eligible for drawback per unit of merchandise, the line item amount that is eligible for drawback is divided by the number of units covered by that line item (to two decimal places).
(v) Limitation on amount of merchandise processing fee eligible for drawback for substitution claims. The amount of a merchandise processing fee eligible for drawback per unit of merchandise for drawback claims based upon substitution is subject to the limitations set forth in §§ 190.22(a)(1)(ii) (manufacturing claims) and 190.32(b) (unused merchandise claims), as applicable.
(3) Calculations for all other duties, taxes, and fees—(i) General. Where a drawback claimant requests a refund of any other duties, taxes, and fees allowable in accordance with § 190.3, the claimant is required to accurately calculate (including apportionment using per unit averaging or inventory management methods, as appropriate) the duties, taxes, and fees attributable to the designated imported merchandise for which drawback is being claimed when calculating the amount of drawback requested on the drawback entry (generally 99% of the duties, taxes, and fees paid on the imported merchandise).
(ii) Examples. As illustrated in the examples in this paragraph, in the case of customs duties, the type of calculation required to determine the amount of duties available for refund (generally 99% of the duties paid on the imported merchandise) will vary depending on whether the duty involved is ad valorem, specific, or compound.
(4) Limitation. The amount of duties, taxes, and fees eligible for drawback per unit of merchandise for drawback claims based upon substituted merchandise is subject to the limitations set forth in § 190.22(a)(1)(ii) (manufacturing claims) and § 190.32(b) (unused merchandise claims), as applicable.
(c) HTSUS classification or Schedule B commodity number(s)—(1) General. Drawback claimants are required to provide, on all drawback claims they submit, the 10-digit HTSUS classification or the Schedule B commodity number(s), for the following:
(i) Designated imported merchandise. For imported merchandise designated on drawback claims, the HTSUS classification applicable at the time of entry (e.g., as required to be reported on the applicable entry summary(s) and other entry documentation).
(ii) Substituted merchandise on manufacturing claims. For merchandise substituted on manufacturing drawback claims, and consistent with the applicable general manufacturing drawback ruling or the specific manufacturing drawback ruling, the applicable HTSUS classification numbers must be the same as either—
(A) If the substituted merchandise was imported, the HTSUS classification applicable at the time of entry (e.g., as required to be reported on the applicable entry summary(s) and other entry documentation); or,
(B) If the substituted merchandise was not imported, the HTSUS classification that would have been reported to CBP for the applicable entry summary(s) and other entry documentation, for the domestically produced substituted merchandise, at the time of entry of the designated imported merchandise.
(iii) Exported merchandise or articles. For exported merchandise or articles, the HTSUS classification or Schedule B commodity number(s) must be from the Electronic Export Information (EEI), when required. If no EEI is required (see, 15 CFR part 30 subpart D for a complete list of exemptions), then the claimant must provide the Schedule B commodity number(s) or HTSUS number(s) that the exporter would have set forth on the EEI when the exportation took place, but for the exemption from the requirement for an EEI.
(iv) Destroyed merchandise or articles. For destroyed merchandise or articles, the HTSUS classification or Schedule B commodity number(s) must be reported, subject to the following:
(A) if the HTSUS classification is reported, then it must be the HTSUS classification that would have been applicable to the destroyed merchandise or articles if they had been entered for consumption at the time of destruction; or
(B) if the Schedule B commodity number is reported, then it must be the Schedule B commodity number that would have been reported for the destroyed merchandise or articles if the EEI had been required for an exportation at the time of destruction.
(2) Changes to classification. If the 10-digit HTSUS classification or the Schedule B commodity number(s) reported to CBP for the drawback claim are determined to be incorrect or otherwise in controversy after the filing of the drawback entry, then the claimant must notify the drawback office where the drawback claim was filed of the correct HTSUS classification or Schedule B commodity number or the nature of the controversy before the liquidation of the drawback entry.
(d) Method of filing. All drawback claims must be submitted through a CBP-authorized system.
(e) Time of filing—(1) General. A complete drawback claim is timely filed if it is successfully transmitted not later than 5 years after the date on which the merchandise designated as the basis for the drawback claim was imported and in compliance with all other applicable deadlines under this part.
(i) Official date of filing. The official date of filing is the date upon which CBP receives a complete claim, as provided in paragraph (a) of this section, via transmission through a CBP-authorized system, including the uploading of all required supporting documentation.
(ii) Abandonment. Claims not completed within the 5-year period after the date on which the merchandise designated as the basis for the drawback claim was imported will be considered abandoned. Except as provided in paragraph (e)(2) of this section, no extension will be granted unless it is established that CBP was responsible for the untimely filing.
(iii) Special timeframes. For substitution claims, the exportation or destruction of merchandise shall not have preceded the date of importation of the designated imported merchandise, and/or the exportation or destruction of merchandise shall not otherwise be outside of the timeframes specified in 19 U.S.C. 1313(c)(2)(C) and 19 U.S.C. 1313(p)(2), if applicable.
(2) Major disaster. The 5-year period for filing a complete drawback claim provided for in paragraph (e)(1) of this section may be extended for a period not to exceed 18 months if:
(i) The claimant establishes to the satisfaction of CBP that the claimant was unable to file the drawback claim because of an event declared by the President to be a major disaster, within the meaning given to that term in 42 U.S.C. 5122(2), on or after January 1, 1994; and
(ii) The claimant files a request for such extension with CBP no later than 1 year from the last day of the 5-year period referred to in paragraph (e)(1) of this section.
(3) Record retention. If an extension is granted with respect to a request filed under paragraph (e)(2)(ii) of this section, the periods of time for retaining records under 19 U.S.C. 1508(c)(3) will be extended for an additional 18 months.