Counting vote.

Miss. Code Ann. § 23-15-523
in effect
Sign in to generate a plain English summaryAsk Belisarius Agent
All proceedings at the counting center shall be under the direction of the election commissioners or officials in charge of the election, and shall be conducted under the observations of the public, but no persons except those authorized for the purpose shall touch any ballot. All persons who are engaged in processing and counting of the ballots shall take the oath provided in Section 268, Mississippi Constitution of 1890. The election commissioners or the officials in charge of the election shall appoint qualified electors who have received the training required by subsection (11) of this section to serve as members of the “resolution board.” An odd number of not less than three (3) members shall be appointed to the resolution board. The members of the board shall take the oath provided in Section 268, Mississippi Constitution of 1890. All ballots that have been rejected by the OMR equipment and that are damaged or defective, blank or overvoted will be reviewed by the board. Election commissioners, candidates who are on the ballot and the spouse, parents, siblings or children of such a candidate shall not be appointed to the resolution board. In general and special elections, members of the party executive committees shall not be appointed to the resolution board unless members of all of the party executive committees who have a candidate on the ballot are appointed to the resolution board. If any ballot is damaged or defective so that it cannot be properly counted by the OMR equipment, the ballot will be deposited in an envelope provided for that purpose marked “RESOLUTION BOARD.” All such ballots shall be carefully handled so as to avoid altering, removing or adding any mark on the ballot. The election commissioners or the officials in charge of the election shall have the members of the resolution board ascertain the intent of the voter, if possible, and, if so, manually count any damaged or defective ballots. The resolution board shall prepare a duplicate to the damaged or defective ballot in the following manner: The resolution board shall prepare a duplicate to the original damaged or defective ballot marked identically to the original. The resolution board shall mark the first original they examine as “Original #1” and the duplicate of this original as “Duplicate #1.” Later originals and duplicates shall be likewise marked and numbered consecutively so the duplicate of each original can be identified. Duplicate ballots shall be stamped in a different manner from the original ballots so that they may be easily distinguished from the originals. The duplicate ballots prepared pursuant to this paragraph shall be counted by the OMR equipment. The resolution board shall examine ballots that have been rejected by the OMR equipment for appearing to be “blank” to verify if they are blank or were marked with a “nondetectable” marking device. If it is determined that the ballot was marked with a nondetectable device, the resolution board shall prepare a duplicate to the original blank ballot in the same manner and in accordance with the same process provided in subsection (3)(c). All ballots that are rejected by the OMR equipment and that contain overvotes shall be inspected by the resolution board. Regarding those rejected ballots upon which an overvote appears, if the voter intent cannot be determined by the resolution board, the officials in charge of the election may use the OMR equipment in determining the vote in the races that are unaffected by the overvote. All other ballots that are overvoted shall be counted manually following the provisions of this section at the direction of the officials in charge of the election. The return printed by the OMR equipment to which have been added the manually tallied ballots, which shall be duly certified by the officials in charge of the election, shall constitute the official return of each voting precinct. Unofficial and incomplete returns may be released during the count. Upon the completion of the counting, the official returns shall be open to the public. When the resolution board reviews any OMR ballot in which the voter has failed to fill in the arrow, oval, circle or square for a candidate or a ballot measure, the resolution board shall, if the intent of the voter can be ascertained, count the vote if: The voter marks the ballot with a “cross” (X) or “checkmark” (Π) and the lines that form the mark intersect within or on the line of the arrow, oval, circle or square by the ballot measure or the name of the candidate. The voter blackens the arrow, oval, circle or square adjacent to the ballot measure or the name of the candidate in pencil or ink and the blackened portion extends beyond the boundaries of the arrow, oval, circle or square. The voter marks the ballot with a “cross” (X) or “checkmark” (Π) and the lines that form the mark intersect adjacent to the ballot measure or the name of the candidate. The voter underlines the ballot measure or the name of a candidate. The voter draws a line from the arrow, oval, circle or square to a ballot measure or the name of a candidate. The voter draws a circle or oval around the ballot measure or the name of the candidate. The voter draws a circle or oval around the arrow, oval, circle or square adjacent to the ballot measure or the name of the candidate. The resolution board, when inspecting an OMR ballot that contains or appears to contain one or more overvotes, appears to be damaged or defective, or is rejected by the OMR equipment for any reason or cannot be counted by the OMR equipment, shall make its determination in accordance with the following: When an elector casts more votes for any office or measure than he or she is entitled to cast at an election, all the elector’s votes for that office or measure are invalid and the elector is deemed to have voted for none of them. If an elector casts less votes for any office or measure than he or she is entitled to cast at an election, all votes cast by the elector shall be counted but no vote shall be counted more than once. If an elector casts more than one (1) vote for the same candidate for the same office, the first vote is valid and the remaining votes for that candidate are invalid. No write-in vote for a candidate whose name is printed on the ballot shall be regarded as invalid due to misspelling a candidate’s name, or by abbreviation, addition or omission or use of a wrong initial in the name, as long as the intent of the voter can be ascertained. In any case where a voter writes in the name of a candidate for President of the United States whose name is printed on the general election ballot, the failure by the voter to write in the name of a candidate for the Office of Vice President of the United States on the general election ballot does not invalidate the elector’s vote for the slate of electors for any candidate whose name is written in for the Office of President of the United States. For any ballot measure in which the words “for” or “against” are printed on a ballot, if the voter shall write the word “for” or the word “against” instead of or in addition to marking the ballot in accordance with the ballot instruction in the space adjacent to the preprinted words “for” or “against,” the resolution board shall, in reviewing such ballot, count the vote in accordance with the voter’s handwritten preference, unless the voter marks the ballot in the space adjacent to the preprinted words “for” or “against” contrary to the handwritten preference, in which case no vote shall be recorded for such ballot in regard to the ballot measure. For any ballot measure in which the words “yes” or “no” are printed on a ballot, if the voter shall write the word “yes” or the word “no” instead of or in addition to marking the ballot in accordance with the ballot instructions in the space adjacent to the preprinted words “yes” or “no,” the resolution board shall, in reviewing such ballot, count the vote in accordance with the voter’s handwritten preference, unless the voter marks the ballot in the space adjacent to the preprinted words “yes” or “no” contrary to the handwritten preference, in which case no vote shall be recorded for such ballot in regard to the ballot measure. OMR equipment shall be programmed, calibrated, adjusted and set up to reject ballots that appear to be damaged or defective. Any switch, lever or feature on OMR equipment that enables or permits the OMR equipment to override the rejection of damaged or defective ballots so that such ballots will not be reviewed by the resolution board, shall not be used. Ballots shall be manually counted by the resolution board only when the ballots are: Properly before the resolution board due to being rejected by the OMR equipment because the ballots appear to be damaged or defective or are rejected by the OMR equipment for any other reason; or Properly before the resolution board due to a malfunction in the OMR equipment. The resolution board shall make and keep a record regarding the handling and counting of all ballots inspected under this section. The executive committee of each county or municipality, in the case of a primary election, or the election commissioners of each county or municipality, in the case of all other elections, in conjunction with the circuit or municipal clerk respectively, shall sponsor and conduct, a training session for up to two (2) hours, not less than five (5) days before each election, to instruct those qualified electors who are appointed to serve as members of the resolution board as to their specific duties in the election. No member appointed to serve on the resolution board shall serve in any election unless he or she has received such instruction once during the twelve (12) months immediately preceding the date upon which the election is held. Online training courses developed by the Secretary of State, though not sponsored or conducted by the executive committee or the election commissioners, may be used to meet the requirements of this subsection (11).

Starting a business in Mississippi? Mississippi LLC guide: costs and requirements