Cal. Health and Safety Code - HSC § 25210.9. Section 25210.9.
(a)
Except as provided in subdivisions (e), (f), and (g), on and after January 1, 2010, a person shall not manufacture general purpose lights for sale in this state that contain levels of hazardous substances that would result in the prohibition of those general purpose lights being sold or offered for sale in the European Union pursuant to the RoHS Directive.
(b)
Except as provided in subdivisions (e), (f), and (g), on and after January 1, 2010, a person shall not sell or
offer for sale in this state a general purpose light under any of the following circumstances:
(1)
The general purpose light being sold or offered for sale was manufactured on and after January 1, 2010, and contains levels of hazardous substances that would result in the prohibition of that general purpose light being sold or offered for sale in the European Union pursuant to the RoHS Directive.
(2)
The manufacturer of the general purpose light sold or being offered for sale fails to provide the documentation to the department required by subdivision (h).
(3)
The manufacturer of the general purpose light being sold or offered for sale does not provide the certification required in subdivision (i).
(c)
For the purposes of this section, “RoHS Directive”
means Directive 2002/95/EC, adopted by the European Parliament and the Council of the European Union on January 27, 2003, on the restriction of certain hazardous substances in electrical and electronic equipment, as amended thereafter by the Commission of European Communities (13.2.2003 Official Journal of the European Union).
(d)
The department shall determine the products covered by the RoHS Directive by reference to authoritative guidance published by the United Kingdom implementing the RoHS Directive in that country.
(e)
(1)
Except as provided in paragraph (2), subdivisions (a), (b), (h), and (i) do not apply to high output and very high output linear fluorescent lamps greater than 32 millimeters in diameter and preheat linear fluorescent lamps.
(2)
On or after January 1, 2014, the
department shall determine, in consultation with companies that manufacture lamps specified in paragraph (1) in the United States, if those lamps should be subject to the requirements of subdivisions (a), (b), (h), and (i), taking into consideration changes in lamp design or manufacturing technology that will allow for the removal or reduction of mercury.
(f)
On and after January 1, 2012, for high intensity discharge lamps and compact fluorescent lamps greater than nine inches in length, subdivisions (a), (b), (h), and (i) shall be applicable.
(g)
On and after January 1, 2014, for state-regulated general service incandescent lamps and enhanced spectrum lamps as defined in subdivision (k) of Section 1602 of Title 20 of the California Code of Regulations, subdivisions (a), (b), (h), and (i) shall be applicable.
(h)
A
manufacturer of general purpose lights sold or being offered for sale in California shall prepare and, at the request of the department, submit within 28 days of the date of the request, technical documentation or other information showing that the manufacturer’s general purpose lights sold or offered for sale in this state comply with the requirements of the RoHS Directive.
(i)
A manufacturer of general purpose lights sold or being offered for sale in California shall provide, upon request, a certification to a person who sells or offers for sale that manufacturer’s general purpose lights. The certification shall attest that the general purpose lights do not contain levels of hazardous substances that would result in the prohibition of those general purpose lights being sold or offered for sale in California. Alternatively, the manufacturer may display the certification required by this subdivision prominently on the shipping container or on
the packaging of general purpose lights.
(j)
The department may adopt regulations to implement and administer this article.