Requirements of hog-tight fence built by railroad on right of way
N.D. Cent. Code § 49-11-27
in effect49-11-27. Requirements of hog-tight fence built by railroad on right of way
A fence built pursuant to a demand made under section 49-11-26 shall be constructed as
follows:
1. The fence shall be not less than twenty-six inches [66.04 centimeters] high.
2. The woven wire shall have not less than seven cables and the meshes therein shall
not exceed six inches [15.24 centimeters] in length.
3. The bottom mesh shall be not more than three inches [7.62 centimeters] wide; the
second mesh shall be not more than three and one-half inches [8.89 centimeters]
wide; the third mesh shall be not more than four inches [10.16 centimeters] wide; the
fourth mesh shall be not more than four and one-half inches [11.43 centimeters] wide;
the fifth mesh shall be not more than five inches [12.7 centimeters] wide; and the sixth
mesh shall be not more than six inches [15.24 centimeters] wide.
4. The bottom wire of the fence shall be placed not to exceed two inches [5.08
centimeters] from the surface of the ground.
5. Not less than three barbed wires of not less than no. 13 standard gauge with barbs not
exceeding six inches [15.24 centimeters] apart shall be placed above the woven wires.
The first barbed wire shall be placed four inches [10.16 centimeters] above the woven
wire; the second barbed wire shall be placed eight inches [20.32 centimeters] above
the first barbed wire; and the third barbed wire shall be placed eight inches [20.32
centimeters] above the second barbed wire.
6. The posts used in such fence shall be of ordinary size for fence purposes, shall be set
in the ground to a depth of at least two feet [.61 meters], and shall be not to exceed
sixteen feet [4.88 meters] apart.
Source: Open US Law by Vaquill AI (CC BY 4.0)URL: https://ndlegis.gov/cencode/t49c11.pdf#nameddest=49-11-27Fetched: 10/16/2026