Ind. Code ch. 13-20-19

in effect

Ind. Code § 13-20-19-1 Recycling coding required before sale

Sec. 1. A person may not sell in Indiana: (1) a plastic bottle with a capacity of at least sixteen (16) fluid ounces; or (2) a rigid plastic container with a capacity of at least eight (8) fluid ounces; unless the bottle or container is coded as required under section 2 of this chapter to assist recyclers in sorting the bottle or container by resin composition. [Pre-1996 Recodification Citation: 13-7-22-1(a).] As added by P.L.1-1996, SEC.10.

Ind. Code § 13-20-19-2 Requirements of coding

Sec. 2. Each bottle and plastic container described in section 1 of this chapter must be coded. The coding must consist of a three (3) sided triangular arrow with a number in the center and letters underneath. The number and letters must indicate the resin from which the container is made as follows: (1) One (1) and "PETE" for polyethylene terephthalate. (2) Two (2) and "HDPE" for high density polyethylene. (3) Three (3) and "V" for vinyl. (4) Four (4) and "LDPE" for low density polyethylene. (5) Five (5) and "PP" for polypropylene. (6) Six (6) and "PS" for polystyrene. (7) Seven (7) and "Other" for other materials, including multi-layer materials. [Pre-1996 Recodification Citation: 13-7-22-1(b).] As added by P.L.1-1996, SEC.10.

Ind. Code § 13-20-19-3 Container with label or base cup of different material to be coded according to primary material

Sec. 3. A bottle or other container with a label or base cup made of a different material than the rest of the container must be coded according to the primary, basic material of the bottle or container. [Pre-1996 Recodification Citation: 13-7-22-1(c).] As added by P.L.1-1996, SEC.10.

Source: Open US Law by Vaquill AI (CC BY 4.0)URL: https://iga.in.gov/laws/2026/ic/titles/13Fetched: 10/17/2026