CFR Subpart F

CFR Subpart F
in effect

15 C.F.R. § 30.50 General requirements for filing import entries.

Electronic entry summary filing through the Automated Commercial Environment (ACE), paper import entry summaries (CBP-7501), or paper record of vessel foreign repair or equipment purchase (CBP-226) shall be completed by the importer of record or its licensed customs broker and filed directly with CBP in accordance with 19 CFR parts 1-199. Information on all mail and informal entries required for statistical and CBP purposes shall be reported, including value not subject to duty. Upon request, the importer of record or the importer's licensed customs broker shall provide the Census Bureau with information or documentation necessary to verify the accuracy of the reported information, or to resolve problems regarding the reported import transaction received by the Census Bureau. (a) Import information for statistical purposes shall be filed for goods shipped as follows: (1) Entering the United States from foreign countries. (2) Admitted to U.S. FTZs. (3) From the U.S. Virgin Islands. (4) From other nonforeign areas (except Puerto Rico). (b) Sources for collecting import statistics include the following: (1) CBP's ABI Program (see 19 CFR Subpart A, Part 143). (2) CBP-7501 paper entry summaries required for individual transactions (see 19 CFR Subpart B, Part 142). (3) CBP-226, Record of Vessel Foreign Repair or Equipment Purchase (see 19 CFR 4.7 and 4.14). (4) CBP-214, Application for Foreign Trade Zone Admission and/or Status Designation (Statistical copy). (5) Electronic CBP Form 214 Admissions (e214). (c) The Kimberley Process Certificate (KPC) for all imports of rough diamonds classified under HS subheadings 7102.10, 7102.21, 7102.31 must be faxed by the importer or customs broker to the Census Bureau on (800) 457-7328, or provided by other methods as permitted by the Census Bureau, immediately after entry of the shipment in the United States.

15 C.F.R. § 30.51 Statistical information required for import entries.

The information required for statistical purposes is, in most cases, also required by CBP regulations for other purposes. Refer to CBP Web site at http://www.cbp.gov to download “Instructions for Preparation of CBP-7501,” for completing the paper entry summary documentation (CBP-7501). Refer to the Customs and Trade Automated Interface Requirements for instructions on submitting an ABI electronic record, or instructions for completing CBP-226 for declaring any equipment, repair parts, materials purchased, or expense for repairs incurred outside of the United States.

15 C.F.R. § 30.52 Foreign Trade Zones (FTZ).

When goods are withdrawn from a FTZ for export to a foreign country, the export shall be reported in accordance with § 30.2. Foreign goods admitted into FTZs shall be reported as a general import. Statistical requirements for zone admissions are provided to the Census Bureau via CBP's Automated Broker Interface (ABI) electronic 214 (e214) program or the CBP Form 214A Application for Foreign Trade Zone Admission and/or Status Designation. Refer to CBP Web site at www.cbp.gov to download the “Foreign Trade Zone Manual” where instructions for completing the paper CBP Form 214A documents are provided in appendix C. When goods are withdrawn for domestic consumption or entry into a bonded warehouse, the withdrawal shall be reported on CBP 7501 or through the ABI in accordance with CBP regulations. The instructions and definitions for completing the e214 are provided in 19 CFR 146. The following data items are required to be filed on the 214A, for statistical purposes: (a) Zone Number and Location (Address) (b) Port Code (c) Importing Vessel and Flag/Other Carrier (d) Export Date (e) Import Date (f) Zone Admission Number (g) U.S. Port of Unlading (h) In-bond Carrier (i) Foreign Port of Lading (j) Bill of Lading/AWB Number (k) Number of Packages & Country of Origin (l) Description of Merchandise (m) HTSUSA Number (n) Quantity (HTSUSA) (o) Gross Weight (p) Separate Value and Aggregate Charges (q) Status Designation

15 C.F.R. § 30.53 Import of goods returned for repair.

Import entries covering U.S. goods imported temporarily to be repaired, altered, or processed under Harmonized Tariff Schedule of the United States Annotated (HTSUSA) commodity classification code 9801.00.1012, and foreign goods imported temporarily to be repaired or altered under the HTSUSA commodity classification code 9813.00.0540 are required to show the following statement: “Imported for Repair and Reexport” on CBP Form 7501 or its electronic equivalent. When the goods are subsequently exported, file according to the instructions provided in § 30.29.

15 C.F.R. § 30.54 Special provisions for imports from Canada.

(a) When certain softwood lumber products described under HTSUSA subheadings 4407.1001, 4409.1010, 4409.1090, and 4409.1020 are imported from Canada, import entry records are required to show a valid Canadian region of manufacture code. The Canadian region of manufacture is determined on a first mill basis (the point at which the item was first manufactured into a covered lumber product). Canadian region of manufacture is the first region where the subject goods underwent a change in tariff classification to the tariff classes cited in this paragraph. The Canadian region code should be transmitted in the electronic ABI summaries. The Canadian region of manufacture code should replace the region of origin code on CBP-7501, entry summary form. These requirements apply only for imports of certain softwood lumber products for which the region of origin is Canada. (b) All other imports from Canada, including certain softwood lumber products not covered in paragraph (a) of this section, will require the two letter designation of the Canadian province of origin to be reported on U.S. entry summary records. This information is required only for U.S. imports that under applicable CBP rules of origin are determined to originate in Canada. For nonmanufactured goods determined to be of Canadian origin, the province of origin is defined as the region where the exported goods were originally grown, mined, or otherwise produced. For goods of Canadian origin that are manufactured or assembled in Canada, with the exception of the certain softwood lumber products described in paragraph (a) of this section, the region of origin is that in which the final manufacture or assembly is performed prior to exporting that good to the United States. In cases where the region in which the goods were manufactured, assembled, grown, mined, or otherwise produced is unknown, the province in which the Canadian vendor is located can be reported. For those reporting on paper forms the region of origin code replaces the country of origin code on CBP Form 7501, entry summary form. (c) All electronic ABI entry summaries for imports originating in Canada also require the Canadian region of origin code to be transmitted for each entry summary line item. (d) The region of origin code replaces the region of origin code only for imports that have been determined, under applicable CBP rules, to originate in Canada. Valid Canadian region/territory codes are:

15 C.F.R. § 30.55 Confidential information, import entries, and withdrawals.

The contents of the statistical copies of import entries and withdrawals on file with the Census Bureau are treated as confidential and will not be released without authorization by CBP, in accordance with 19 CFR part 103 relating to the copies on file in CBP offices. The importer or import broker must provide the Census Bureau with information or documentation necessary to verify the accuracy or resolve problems regarding the reported import transaction. (a) The basic responsibility for obtaining and providing the information required by the general statistical headnotes of the HTSUSA rests with the person filing the import entry. This is provided for in section 484(a) of the Tariff Act, 19 CFR 141.61(e) of CBP regulations, and § 30.50 of this subpart. CBP Regulations 19 CFR 141.61(a) specify that the entry summary data clearly set forth all information required. (b) 19 CFR 141.61(e) of CBP regulations provides that penalty procedures relating to erroneous statistical information shall not be invoked against any person who attempts to comply with the statistical requirements of the General Statistical Notes of the HTSUSA. However, in those instances where there is evidence that statistical suffixes are misstated to avoid quota action, or a misstatement of facts is made to avoid import controls or restrictions related to specific commodities, the importer or its licensed broker should be aware that the appropriate actions will be taken under 19 U.S.C. 1592, as amended.

Starting a business? Corpus forms LLCs in all 50 states and DC.