CFR Subpart B

CFR Subpart B
in effect

16 C.F.R. § 1112.11 What are the types of third party conformity assessment bodies?

(a) Independent. Independent third party conformity assessment bodies are third party conformity assessment bodies that are neither owned, managed, or controlled by a manufacturer or private labeler of a children's product to be tested by the third party conformity assessment body, nor owned or controlled, in whole or in part, by a government; (b) Firewalled. A third party conformity assessment body must apply for firewalled status if: (1) It is owned, managed, or controlled by a manufacturer or private labeler of a children's product; (i) For purposes of determining whether a third party conformity assessment body is firewalled, “manufacturer” includes a trade association. (ii) A manufacturer or private labeler is considered to own, manage, or control a third party conformity assessment body if any one of the following characteristics applies: (A) The manufacturer or private labeler of the children's product holds a 10 percent or greater ownership interest, whether direct or indirect, in the third party conformity assessment body. Indirect ownership interest is calculated by successive multiplication of the ownership percentages for each link in the ownership chain; (B) The third party conformity assessment body and a manufacturer or private labeler of the children's product are owned by a common “parent” entity; or (C) A manufacturer or private labeler of the children's product has the ability to appoint any of the third party conformity assessment body's senior internal governing body (such as, but not limited to, a board of directors), the ability to appoint the presiding official (such as, but not limited to, the chair or president) of the third party conformity assessment body's senior internal governing body, the ability to hire, dismiss, or set the compensation level for third party conformity assessment body personnel, regardless of whether this ability is ever exercised; (2) The children's product is subject to a CPSC children's product safety rule that the third party conformity assessment body requests CPSC acceptance to test; and (3) The third party conformity assessment body intends to test such children's product made by the owning, managing, or controlling entity for the purpose of supporting a Children's Product Certificate. (c) Governmental. Governmental third party conformity assessment bodies are owned or controlled, in whole or in part, by a government. For purposes of this part, “government” includes any unit of a national, territorial, provincial, regional, state, tribal, or local government, and a union or association of sovereign states. “Government” also includes domestic, as well as foreign entities. A third party conformity assessment body is “owned or controlled, in whole or in part, by a government” if any one of the following characteristics applies: (1) A governmental entity holds a 1 percent or greater ownership interest, whether direct or indirect, in the third party conformity assessment body. Indirect ownership interest is calculated by successive multiplication of the ownership percentages for each link in the ownership chain; (2) A governmental entity provides any direct financial investment or funding (other than fee for work); (3) A governmental entity has the ability to appoint a majority of the third party conformity assessment body's senior internal governing body (such as, but not limited to, a board of directors); the ability to appoint the presiding official of the third party conformity assessment body's senior internal governing body (such as, but not limited to, chair or president); and/or the ability to hire, dismiss, or set the compensation level for third party conformity assessment body personnel; (4) Third party conformity assessment body management or technical personnel include any government employees; (5) The third party conformity assessment body has a subordinate position to a governmental entity in its external organizational structure (not including its relationship as a regulated entity to a government regulator); or (6) Apart from its role as regulator, the government can determine, establish, alter, or otherwise affect: (i) The third party conformity assessment body's testing outcomes; (ii) The third party conformity assessment body's budget or financial decisions; (iii) Whether the third party conformity assessment body may accept particular offers of work; or (iv) The third party conformity assessment body's organizational structure or continued existence.

16 C.F.R. § 1112.13 How does a third party conformity assessment body apply for CPSC acceptance?

(a) Baseline Requirements. Each third party conformity assessment body seeking CPSC acceptance must: (1) Submit a completed Consumer Product Conformity Assessment Body Registration Form (CPSC Form 223 or Application). In submitting a CPSC Form 223, the third party conformity assessment body must attest to facts and characteristics about its business that will determine whether the third party conformity assessment body is independent, firewalled, or governmental. The third party conformity assessment body also must attest that it has read, understood, and agrees to the regulations in this part. The third party conformity assessment body must update its CPSC Form 223 whenever any information previously supplied on the form changes. (2) Submit the following documentation. (i) Accreditation certificate. (A) The third party conformity assessment body must be accredited to the ISO/IEC 17025, “General requirements for the competence of testing and calibration laboratories.” (B) The accreditation must be by an accreditation body that is a signatory to the International Laboratory Accreditation Cooperation-Mutual Recognition Arrangement (ILAC-MRA). (ii) Statement of scope. The third party conformity assessment body's accreditation must include a statement of scope that clearly identifies each CPSC rule and/or test method for which CPSC acceptance is sought. Although a third party conformity assessment body may include more than one CPSC rule and/or test method in its scope in one application, it must submit a new application if the CPSC has already accepted the third party conformity assessment body for a particular scope, and the third party conformity assessment body wishes to expand its acceptance to include additional CPSC rules and/or test methods. (b) Additional Requirements for Firewalled Third Party Conformity Assessment Bodies. (1) A third party conformity assessment body may be accepted as a firewalled third party conformity assessment body if the Commission, by order, makes the findings described in § 1112.17(b). (2) For the Commission to evaluate whether an applicant firewalled third party conformity assessment body satisfies the criteria listed in § 1112.17(b), and in addition to the baseline accreditation requirements in paragraph (a) of this section, a firewalled third party conformity assessment body applying for acceptance of its accreditation must submit copies of: (i) The third party conformity assessment body's established policies and procedures that explain: (A) How the third party conformity assessment body will protect its test results from undue influence by the manufacturer, private labeler, or other interested party; (B) That the CPSC will be notified immediately of any attempt by the manufacturer, private labeler, or other interested party to hide or exert undue influence over the third party conformity assessment body's test results; and (C) That allegations of undue influence may be reported confidentially to the CPSC; (ii) Training documents, including a description of the training program content, showing how employees are trained annually on the policies and procedures described in paragraph (b)(2)(i) of this section; (iii) Training records, including a list and corresponding signatures, of the staff members who received the training identified in paragraph (b)(2)(ii) of this section. The records must include training dates, location, and the name and title of the individual providing the training; (iv) An organizational chart(s) of the third party conformity assessment body that includes the names of all third party conformity assessment body personnel, both temporary and permanent, and their reporting relationship within the third party conformity assessment body; (v) An organizational chart(s) of the broader organization that identifies the reporting relationships of the third party conformity assessment body within the broader organization (using both position titles and staff names); and (vi) A list of all third party conformity assessment body personnel with reporting relationships outside of the third party conformity assessment body. The list must identify the name and title of the relevant third party conformity assessment body employee(s) and the names, titles, and employer(s) of all individuals outside of the third party conformity assessment body to whom they report; (c) Additional Requirements for Governmental Third Party Conformity Assessment Bodies. (1) The CPSC may accept a governmental third party conformity assessment body if the CPSC determines that: (i) To the extent practicable, manufacturers or private labelers located in any nation are permitted to choose third party conformity assessment bodies that are not owned or controlled by the government of that nation; (ii) The third party conformity assessment body's testing results are not subject to undue influence by any other person, including another governmental entity; (iii) The third party conformity assessment body is not accorded more favorable treatment than other third party conformity assessment bodies in the same nation who have been accredited; (iv) The third party conformity assessment body's testing results are accorded no greater weight by other governmental authorities than those of other accredited third party conformity assessment bodies; and (v) The third party conformity assessment body does not exercise undue influence over other governmental authorities on matters affecting its operations or on decisions by other governmental authorities controlling distribution of products based on outcomes of the third party conformity assessment body's conformity assessments. (2) For the CPSC to evaluate whether a governmental third party conformity assessment body satisfies the criteria listed in paragraph (c)(1) of this section, and in addition to the baseline accreditation requirements in paragraph (a) of this section, a governmental third party conformity assessment body seeking CPSC-accepted status must submit: (i) Description. A description illustrating the relationships with other entities, such as government agencies and joint ventures partners. The description may be in the form of a diagram; (ii) Responses to questionnaires. The CPSC will provide a governmental third party conformity assessment body applicant with a questionnaire and will provide a separate questionnaire to the affiliated governmental entity; (iii) Executed memorandum. A copy of an executed memorandum addressing undue influence; (A) The memorandum must be: (1) Addressed to all staff of the third party conformity assessment body; (2) On company letterhead; (3) From senior management of the third party conformity assessment body; (4) In the primary written language used for business communication in the area where the third party conformity assessment body is located; if that language is different than English, an English translation of the executed memorandum must also be provided to the CPSC; (5) Displayed prominently for staff reference for as long as the accreditation of the third party conformity assessment body whose accreditation is accepted by the CPSC; and (B) The memorandum must state that: (1) The policy of the laboratory is to reject undue influence by any manufacturer, private labeler, governmental entity, or other interested party, regardless of that person or entity's affiliation with any organization; (2) Employees are required to report immediately to their supervisor or any other official designated by the third party conformity assessment body about any attempts to gain undue influence; and (3) The third party conformity assessment body will not tolerate violations of the undue influence policy. (iv) Attestation. A senior officer of the governmental third party conformity assessment body, who has the authority to make binding statements of policy on behalf of the third party conformity assessment body, must attest to the following: (A) The third party conformity assessment body seeks acceptance as a governmental third party conformity assessment body under the CPSC's program of requirements for the testing of children's products; (B) The official intends the attestation to be considered in support of any and all applications made by this third party conformity assessment body for acceptance of its accreditation by the CPSC, including future applications related to additional CPSC rules and/or test methods; (C) The attestation, and any other document submitted in support of the application, is accurate in its representation of current conditions or policies at the third party conformity assessment body, to the best of the official's knowledge, information, and/or belief. The information in the attestation, and any other document submitted in support of the application, will be understood by the CPSC as continuing in its accuracy in every respect, until and unless notice of its revocation by an authorized officer of the third party conformity assessment body is received by the CPSC. The official understands that acceptance by the CPSC carries with it the obligation to comply with this part, in order to remain on the CPSC's list of accepted third party conformity assessment bodies. The attestation is submitted as a condition of acceptance of this laboratory as a governmental third party conformity assessment body by the CPSC. (D) The word “government” in the attestation refers to any government (central, provincial, municipal, or other) in this third party conformity assessment body's country or administrative area and includes state-owned entities, even if those entities do not carry out governmental functions. (E) With regard to consumer products to be distributed in commerce in the United States and subject to CPSC third party testing requirements, the third party conformity assessment body does not receive, and will not accept from any governmental entity, treatment that is more favorable than that received by other third party conformity assessment bodies in the same country or administrative area, which have been accepted as accredited for third party testing by the CPSC. More favorable treatment for a governmental third party conformity assessment body includes, but is not limited to, authorization to perform essential export-related functions, while competing CPSC-accepted laboratories in the same country or administrative area are not permitted to perform those same functions. (F) With regard to consumer products to be sold in the United States and subject to CPSC third party testing requirements, the third party conformity assessment body's testing results are not accorded greater weight by any governmental entity that may be evaluating such results for export control purposes, compared to other third party conformity assessment bodies in the same country or administrative area, which have been accepted as accredited for third party testing by the CPSC. (G) The third party conformity assessment body has an expressed policy, known to its employees, that forbids attempts at undue influence over any government authorities on matters affecting its operations. (H) When a governmental third party conformity assessment body is owned or controlled by a governmental entity that also has any ownership or control over consumer product production, the senior officer of the applicant third party conformity assessment body must attest that the third party conformity assessment body will not conduct CPSC tests in support of a Children's Product Certificate for products for export to the United States that have been produced by an entity in which that governmental entity holds such ownership or control until it has applied for and been accepted by the Commission as, a dual governmental-firewalled third party conformity assessment body. (v) Governmental entity attestation. In the event that the CPSC determines that its ability to accept a governmental third party conformity assessment body's application is dependent upon a recently changed circumstance in the relationship between the third party conformity assessment body and a governmental entity, and/or a recently changed policy of the related governmental entity, the CPSC may require the relevant governmental entity to attest to the details of the new relationship or policy. (d) Dual firewalled and governmental status. A third party conformity assessment body that meets both the firewalled and the governmental criteria must submit applications under both firewalled and governmental categories. (e) English language. All application materials must be in English. (f) Electronic submission. The CPSC Form 223 and all accompanying documentation must be submitted electronically via the CPSC Web site. (g) Clarification and verification. The CPSC may require additional information to determine whether the third party conformity assessment body meets the relevant criteria. In addition, the CPSC may verify accreditation certificate and scope information directly from the accreditation body before approving an application. (h) Retraction of application. A third party conformity assessment body may retract a submitted CPSC Form 223 any time before the CPSC has acted on the submission. A retraction will not end or nullify any enforcement action that the CPSC is otherwise authorized by law to pursue. (i) Incorporation by reference. The Director of the Federal Register approves the incorporation by reference in paragraph (a)(2)(i) of this section in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy of ISO/IEC 17025:2017(E), “Requirements for the competence of testing and calibration laboratories,” approved November 10, 2021 from the International Organization for Standardization (ISO), ISO Central Secretariat Chemin de Blandonnet 8 CP 401-1214 Vernier, Geneva, Switzerland; Telephone + 41 22 749 01 11, Fax + 41 22 733 34 30; http://www.iso.org/iso/home.htm. You may inspect a copy at the Division of the Secretariat, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone (301) 504-7479, email: cpsc-os@cpsc.gov, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fedreg.legal@nara.gov, or go to: www.archives.gov/federal-register/cfr/ibr-locations.html.

16 C.F.R. § 1112.15 When can a third party conformity assessment body apply for CPSC acceptance for a particular CPSC rule or test method?

(a) Once the CPSC publishes the requirements for accreditation to a particular CPSC rule or test method, a third party conformity assessment body may apply to the CPSC for acceptance to that scope of accreditation. An application may be made for acceptance of accreditation to more than one CPSC rule or test method. Once accepted by the CPSC, a third party conformity assessment body may apply at any time to expand the scope of its acceptance to include additional CPSC rules or test methods. A third party conformity assessment body may only issue test results for purposes of section 14 of the CPSA that fall within a scope for which the CPSC has accepted the third party conformity assessment body's accreditation. (b) The CPSC has published the requirements for accreditation for third party conformity assessment bodies to assess conformity for the following CPSC rules or test methods: (1) 16 CFR part 1203, Safety Standard for Bicycle Helmets; (2) 16 CFR part 1215, Safety Standard for Infant Bath Seats; (3) 16 CFR part 1216, Safety Standard for Infant Walkers; (4) 16 CFR part 1217, Safety Standard for Toddler Beds; (5) 16 CFR part 1219, Safety Standard for Full-Size Baby Cribs; (6) 16 CFR part 1220, Safety Standard for Non-Full-Size Baby Cribs; (7) 16 CFR part 1221, Safety Standard for Play Yards; (8) 16 CFR part 1223, Safety Standard for Infant Swings; (9) 16 CFR part 1224, Safety Standard for Portable Bed Rails; (10) 16 CFR part 1303, Ban of Lead-Containing Paint and Certain Consumer Products Bearing Lead-Containing Paint. For its accreditation to be accepted by the Commission to test to 16 CFR part 1303, a third party conformity assessment body must have one or more of the following test methods referenced in its statement of scope: (i) CPSC Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings, CPSC-CH-E1003-09; (ii) CPSC Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings, CPSC-CH-E1003-09.1; (iii) ASTM F2853-10, “Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams.” (11) 16 CFR part 1420, Safety Standard for All-Terrain Vehicles; (12) 16 CFR 1500.86(a)(5), Exceptions from Classification as a Banned Toy or Other Banned Article for Use by Children (Clacker Balls); (13) 16 CFR 1500.86(a)(7) and (8), Exceptions from Classification as a Banned Toy or Other Banned Article for Use by Children (Dive Sticks and Similar Articles); (14) 16 CFR part 1501, Method for Identifying Toys and Other Articles Intended for Use by Children Under 3 Years of Age Which Present Choking, Aspiration, or Ingestion Hazards Because of Small Parts; (15) 16 CFR part 1505, Requirements for Electrically Operated Toys or Other Electrically Operated Articles Intended for Use by Children; (16) 16 CFR part 1510, Requirements for Rattles; (17) 16 CFR part 1511, Requirements for Pacifiers; (18) 16 CFR part 1512, Requirements for Bicycles; (19) 16 CFR part 1513, Requirements for Bunk Beds; (20) 16 CFR part 1610, Standard for the Flammability of Clothing Textiles; (21) 16 CFR part 1611, Standard for the Flammability of Vinyl Plastic Film; (22) 16 CFR part 1615, Standard for the Flammability of Children's Sleepwear: Sizes 0 Through 6X (FF 3-71); (23) 16 CFR part 1616, Standard for the Flammability of Children's Sleepwear: Sizes 7 Through 14 (FF 5-74); (24) 16 CFR part 1630, Standard for the Surface Flammability of Carpets and Rugs (FF 1-70); (25) 16 CFR part 1631, Standard for the Surface Flammability of Small Carpets and Rugs (FF 2-70); (26) 16 CFR part 1632, Standard for the Flammability of Mattresses and Mattress Pads (FF 4-72, amended); (27) 16 CFR part 1633, Standard for the Flammability (Open Flame) of Mattress Sets; (28) Lead Content in Children's Metal Jewelry. For its accreditation to be accepted by the Commission to test for lead content in children's metal jewelry, a third party conformity assessment body must have one or more of the following test methods referenced in its statement of scope: (i) CPSC Test Method CPSC-CH-E1001-08, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry)”; (ii) CPSC Test Method CPSC-CH-E1001-08.1, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry)”; (iii) CPSC Test Method CPSC-CH-E1001-08.2, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry)”; (iv) CPSC Test Method CPSC-CH-E1001-08.3, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry)”; (v) Section I, “Screening Test for Total Pb Analysis,” from CPSC “Standard Operating Procedure for Determining Lead (Pb) and its Availability in Children's Metal Jewelry,” February 3, 2005; (29) Limits on Total Lead in Children's Products: Children's Metal Products. For its accreditation to be accepted by the Commission to test for total lead content in children's metal products, a third party conformity assessment body must have one or more of the following test methods referenced in its statement of scope: (i) CPSC Test Method CPSC-CH-E1001-08, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry)”; (ii) CPSC Test Method CPSC-CH-E1001-08.1, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry)”; (iii) CPSC Test Method CPSC-CH-E1001-08.2, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry)”; (iv) CPSC Test Method CPSC-CH-E1001-08.3, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry)”; (30) Limits on Total Lead in Children's Products: Nonmetal Children's Products. For its accreditation to be accepted by the Commission to test for lead content in nonmetal children's products, a third party conformity assessment body must have one or more of the following test methods referenced in its statement of scope: (i) CPSC Test Method CPSC-CH-E1002-08, “Standard Operating Procedure for Determining Total Lead (Pb) in Nonmetal Children's Products”; (ii) CPSC Test Method CPSC-CH-E1002-08.1, “Standard Operating Procedure for Determining Total Lead (Pb) in Nonmetal Children's Products”; (iii) CPSC Test Method CPSC-CH-E1002-08.2, “Standard Operating Procedure for Determining Total Lead (Pb) in Nonmetal Children's Products”; (iv) CPSC Test Method CPSC-CH-E1002-08.3, “Standard Operating Procedure for Determining Total Lead (Pb) in Nonmetal Children's Products”; (31) 16 CFR part 1307, Prohibition of Children's Toys and Child Care Articles Containing Specified Phthalates. For its accreditation to be accepted by the Commission to test for phthalates in children's toys and child care articles, a third party conformity assessment body must have one or more of the following test methods referenced in its statement of scope: (i) CPSC Test Method CPSC-CH-C1001-09.4, “Standard Operating Procedure for Determination of Phthalates”; (ii) GB/T 22048-2008, “Toys and Children's Products—Determination of Phthalate Plasticizers in Polyvinyl Chloride Plastic”; (32) 16 CFR part 1250, safety standard for toys. CPSC only requires certain provisions of ASTM F963-23 to be subject to third party testing; therefore, CPSC only accepts the accreditation of third-party conformity assessment bodies for testing under the following toy safety standards: (i) [Reserved] (ii) ASTM F963-23: (A) Section 4.3.5.1(2), Surface Coating Materials—Soluble Test for Metals (B) Section 4.3.5.2, Toy Substrate Materials (C) Section 4.3.6, Cleanliness of Liquids, Pastes, Putties, Gels, and Powders, and Items of Avian Feather Origin (except for cosmetics and tests on formulations used to prevent microbial degradation). (D) Section 4.3.7, Stuffing Materials (E) Section 4.5, Sound Producing Toys (F) Section 4.6, Small Objects (except labeling and/or instructional literature requirements) (G) Section 4.7, Accessible Edges (except labeling and/or instructional literature equirements) (H) Section 4.8, Projections (except bath toy projections) (I) Section 4.9, Accessible Points (except labeling and/or instructional literature requirements) (J) Section 4.10, Wires or Rods (K) Section 4.11, Nails and Fasteners (L) Section 4.12, Plastic Film (M) Section 4.13, Folding Mechanisms and Hinges (N) Section 4.14, Cords, Straps, and Elastics (O) Section 4.15, Stability and Overload Requirements (P) Section 4.16, Confined Spaces (Q) Section 4.17, Wheels, Tires, and Axles (R) Section 4.18, Holes, Clearances, and Accessibility of Mechanisms (S) Section 4.19, Simulated Protective Devices (except labeling and/or instructional literature requirements) (T) Section 4.20.1, Pacifiers with Rubber Nipples/Nitrosamine Test (U) Section 4.20.2, Toy Pacifiers (V) Section 4.21, Projectile Toys (W) Section 4.22, Teethers and Teething Toys (X) Section 4.23.1, Rattles with Nearly Spherical, Hemispherical, or Circular Flared Ends (Y) Section 4.24, Squeeze Toys (Z) Section 4.25, Battery-Operated Toys (except labeling and/or instructional literature requirements) (AA) Section 4.26, Toys Intended to Be Attached to a Crib or Playpen (except labeling and/or instructional literature requirements) (BB) Section 4.27, Stuffed and Beanbag-Type Toys (CC) Section 4.30, Toy Gun Marking (DD) Section 4.32, Certain Toys with Nearly Spherical Ends (EE) Section 4.35, Pompoms (FF) Section 4.36, Hemispheric-Shaped Objects (GG) Section 4.37, Yo-Yo Elastic Tether Toys (HH) Section 4.38, Magnets (except labeling and/or instructional literature requirements) (II) Section 4.39, Jaw Entrapment in Handles and Steering Wheels (JJ) Section 4.40, Expanding Materials (KK) Section 4.41, Toy Chests (except labeling and/or instructional literature requirements) (33) 16 CFR part 1218, Safety Standard for Bassinets and Cradles. (34) 16 CFR part 1225, Safety Standard for Hand-Held Infant Carriers. (35) 16 CFR part 1222, Safety Standard for Bedside Sleepers. (36) 16 CFR part 1227, Safety Standard for Carriages and Strollers. (37) 16 CFR part 1226, Safety Standard for Soft Infant and Toddler Carriers. (38) 16 CFR part 1230, Safety Standard for Frame Child Carriers. (39) 16 CFR part 1228, Safety Standard for Sling Carriers. (40) 16 CFR part 1233, Safety Standard for Portable Hook-On Chairs. (41) 16 CFR part 1234, Safety Standard for Infant Bath Tubs. (42) 16 CFR part 1229, Safety Standard for Infant Bouncer Seats. (43) 16 CFR part 1232, Safety Standard for Children's Folding Chairs and Children's Folding Stools. (44) 16 CFR part 1231, Safety Standard for High Chairs. (45) 16 CFR part 1235, Safety Standard for Baby Changing Products. (46) 16 CFR part 1236, Safety Standard for Infant Sleep Products. (47) 16 CFR part 1237, Safety Standard for Booster Seats. (48) 16 CFR part 1238, Safety Standard for Stationary Activity Centers. (49) 16 CFR part 1239, Safety Standard for Gates and Enclosures. (50) 16 CFR part 1241, Safety Standard for Crib Mattresses. (51) [Reserved] (52) 16 CFR part 1262, Safety Standard for Magnets. (53) 16 CFR part 1260, Safety Standard for Operating Cords on Custom Window Coverings. (54) 16 CFR part 1261, Safety Standard for Clothing Storage Units. (55) 16 CFR part 1263, Safety Standard for Button Cell or Coin Batteries and Consumer Products Containing Such Batteries. (c) The Director of the Federal Register approves the incorporations by reference in paragraph (b) of this section in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may inspect a copy of the standards incorporated in this section at the Office of the Secretary, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone 301-504-7923, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. (1) ASTM International, 100 Bar Harbor Drive, P.O. Box 0700, West Conshohocken, PA 19428: http://www.astm.org. (i) ASTM F2853-10, “Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams,” July 1, 2010; (ii) ASTM F963-23, “Standard Consumer Safety Specification for Toy Safety,” August 1, 2023. (2) Code of China, Room 2118, New Fortune International Plaza, No.71 Chaoyang Road, Chaoyang District, Beijing, 100123, China: http://www.codeofchina.com/. (i) GB/T 22048-2008, National Standard of the People's Republic of China, “Toys and Children's Products—Determination of Phthalate Plasticizers in Polyvinyl Chloride Plastic,” June 18, 2008; (ii) [Reserved] (3) CPSC National Product Testing and Evaluation Center, 5 Research Place, Rockville, MD 20850; www.cpsc.gov. (i) CPSC-CH-C1001-9.4, “Standard Operating Procedure for Determination of Phthalates”, January 17, 2018; (ii) CPSC-CH-E1001-08, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry)”, December 4, 2008; (iii) CPSC-CH-E1001-08.1, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry), Revision”, June 21, 2010; (iv) CPSC-CH-E1001-08.2, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry), Revision”, April 10, 2012; (v) CPSC-CH-E1001-08.3, “Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry) Revision”, November 15, 2012; (vi) CPSC-CH-E1002-08, “Standard Operating Procedure for Determining Total Lead (Pb) in Non-metal Children's Products”, February 1, 2009; (vii) CPSC-CH-E1002-08.1, “Standard Operating Procedure for Determining Total Lead (Pb) in Non-metal Children's Products, Revised”, June 21, 2010; (viii) CPSC-CH-E1002-08.2, “Standard Operating Procedure for Determining Total Lead (Pb) in Nonmetal Children's Products, Revision”, April 10, 2012; (ix) CPSC-CH-E1002-08.3, “Standard Operating Procedure for Determining Total Lead (Pb) in Non-metal Children's Products, Revision”, November 15, 2012; (x) CPSC-CH-E1003-09, “Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings”, April 26, 2009; (xi) CPSC-CH-E1003-09.1, “Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings”, February 25, 2011; (xii) CPSC “Standard Operating Procedure for Determining Lead (Pb) and its Availability in Children's Metal Jewelry”, February 3, 2005.

16 C.F.R. § 1112.17 How will the CPSC respond to each application?

(a) The CPSC staff will review each application and may contact the third party conformity assessment body with questions or to request submission of missing information. (b) The application of a firewalled third party conformity assessment body will be accepted by order of the Commission, if the Commission finds that: (1) Acceptance of the accreditation of the third party conformity assessment body would provide equal or greater consumer safety protection than the manufacturer's or private labeler's use of an independent third party third party conformity assessment body; and (2) The third party conformity assessment body has established procedures to ensure that: (i) Its test results are protected from undue influence by the manufacturer, private labeler, or other interested party; (ii) The CPSC is notified immediately of any attempt by the manufacturer, private labeler, or other interested party to hide or exert undue influence over test results; and (iii) Allegations of undue influence may be reported confidentially to the CPSC. (c) The CPSC will communicate its decision on each application in writing to the applicant, which may be by electronic mail.

16 C.F.R. § 1112.19 How does the CPSC publish information identifying third party conformity assessment bodies that have been accepted?

The CPSC will maintain on its Web site an up-to-date listing of third party conformity assessment bodies whose accreditations it has accepted and the scope of each acceptance. The CPSC will update the listing regularly to account for changes, such as the addition of new CPSC rules and/or test methods to its scope of accreditation, changes to accreditation certificates, new addresses, as well as changes to the status of a third party conformity assessment body due to voluntary discontinuance, suspension, and/or withdrawal. The CPSC will also list the firewalled or governmental status of accepted laboratories on the CPSC Web site.

16 C.F.R. § 1112.21 May a third party conformity assessment body use testing methods other than those specified in the relevant CPSC rule or test method?

If the CPSC has specified a test method, a third party conformity assessment body must use that test method for any tests conducted for purposes of section 14 of the CPSA.

16 C.F.R. § 1112.23 May a CSPC-accepted third party conformity assessment body subcontract work conducted for purposes of section 14 of the CPSA?

(a) A CPSC-accepted third party conformity assessment body (which, for purposes of this section, also will be referred to as the prime contractor) may only subcontract work conducted for purposes of section 14 of the CPSA to other third party conformity assessment bodies whose accreditation has been accepted by the CPSC for the scope necessary for the subcontracted work. Violation of this provision constitutes compromising the integrity of the testing process and may be grounds for withdrawal of the CPSC's acceptance of the accreditation of the prime and/or subcontracting third party conformity assessment body. (b) The provisions of this part apply to all CPSC-accepted third party conformity assessment bodies, even if they are a prime contractor and/or a subcontractor.

16 C.F.R. § 1112.25 What are a third party conformity assessment body's recordkeeping responsibilities?

(a) The third party conformity assessment body must maintain the following records, which must be legible: (1) All test reports and technical records related to tests conducted for purposes of section 14 of the CPSA must be maintained for a period of at least five years from the date the test was conducted; (2) In the case of a test report for a test conducted by a CPSC-accepted third party conformity assessment body acting as a subcontractor, the prime contractor's test report must clearly identify which test(s) was performed by a CPSC-accepted third party conformity assessment body acting as a subcontractor(s), and the test report from the CPSC-accepted third party conformity assessment body acting as a subcontractor must be available upon request by CPSC. (3) Where a report, for purposes of section 14 of the CPSA, provided by the third party conformity assessment body to a customer is different from the test record, the third party conformity assessment body also must retain the report provided to the customer for a period of at least five years from the date the test was conducted. (4) Any and all third party conformity assessment body internal documents describing testing protocols and procedures (such as instructions, standards, manuals, guides, and reference data) that have applied to a test conducted for purposes of section 14 of the CPSA must be retained for a period of at least five years from the date such test was conducted. (b) Upon request by the CPSC, the third party conformity assessment body must make any and all of the records required by this section available for inspection, either in hard copy or electronically, such as through an Internet Web site. If the records are not in the English language, the third party conformity assessment body must make copies of the original (non-English language) available to the CPSC within 48 hours, and they must make an English translation of the records available to the CPSC within 30 calendar days of the date the CPSC requested an English translation.

16 C.F.R. § 1112.27 Must a third party conformity assessment body allow CPSC inspections related to investigations?

A third party conformity assessment body, as a condition of the continued CPSC-acceptance of its accreditation, must allow an officer or employee duly designated by the CPSC to enter and inspect the third party conformity assessment body for purposes of an investigation under this part. The CPSC will conduct such inspections in accordance with 16 CFR 1118.2. Failure to cooperate with such an inspection constitutes failure to cooperate with an investigation and is grounds for suspension under § 1112.45.

16 C.F.R. § 1112.29 How does a third party conformity assessment body voluntarily discontinue its participation with the CPSC?

(a) A third party conformity assessment body may voluntarily discontinue participation as a CPSC-accepted third party conformity assessment body at any time and for any portion of its scope that is accepted by the CPSC. The third party conformity assessment body must notify the CPSC, in writing, which may be electronic. The notice must include: (1) Name, address, phone number, electronic mail address for the third party conformity assessment body and the person responsible for submitting the request; (2) Scope of the discontinuance; (3) Beginning date for the discontinuance; (4) Statement that the third party conformity assessment body understands that it must reapply for acceptance of the accreditation scope for which it is requesting discontinuance; and (5) Verification that the person requesting the discontinuance has the authority to make such a request on behalf of the third party conformity assessment body. (b) The CPSC may verify the information submitted in a notice of voluntary discontinuance. (c) Upon receipt of a notice from a third party conformity assessment body that it wishes to discontinue voluntarily as a CPSC-accepted third party conformity assessment body, or after verifying the information in a notice, the CPSC will update its Web site to indicate that the CPSC no longer accepts the accreditation of the third party conformity assessment body for the scope indicated, as of the date provided in the notice. (d) Notwithstanding a third party conformity assessment body's voluntary discontinuance as a CPSC-accepted third party conformity assessment body, the CPSC may begin or continue an investigation related to an adverse action under this part, or other legal action.

Starting a business? Corpus forms LLCs in all 50 states and DC.