Section BC 3502: Standards
AA Aluminum Association 1525 Wilson Boulevard, Suite 600 Arlington, VA 22209
Standard reference number Title Referenced in code section number
ADM—15 Aluminum Design Manual: Part 1—A Specification for Aluminum Structures 1604.3.5, 1705.33.1, 2002.1
ASM 35—00 Aluminum Sheet Metal Work in Building Construction (Fourth Edition) 2002.1
AAMA American Architectural Manufacturers Association 1827 Waldon Office Square, Suite 550 Schaumburg, IL 60173
Standard reference number Title Referenced in code section number
1402—09 Standard Specifications for Aluminum Siding, Soffit and Fascia 1404.5.1
AAMA/WDMA/CSA 101/I.S.2/A440—11 North American Fenestration Standard/Specifications for Windows, Doors and Skylights 1709.5.1, 2405.5
AASHTO American Association of State Highway and Transportation Officials 444 N Capitol Street NW, Suite 249 Washington, DC 20001
Standard reference number Title Referenced in code section number
T318—15 Standard Method of Test for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying 1905.6.2.1, 1905.6.3.6
ACI American Concrete Institute 38800 Country Club Drive Farmington Hills, MI 48331
Standard reference number Title Referenced in code section number
216.1—14 Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies Table 721.1(2), 722.1
301—10 Specification for Structural Concrete 1812.1.1, 1905.2.4, 1905.3.5.2, 1905.6.3.7
306R—10 Guide to Cold Weather Concreting Table 1904.4.2
318—14* * As modified in Section 1908 Building Code Requirements for Structural Concrete 406.7.3, 722.2.4.3, 1604.3.2, Table 1613.5, Table 1705.2, Table 1705.3, 1705.3.1, 1705.37, 1809.5.7.2, 1809.6, Table 1810.2.13, Table 1810.8, 1810.9.1.1, 1810.9.2, 1810.9.2.1, 1811.6.3.2, 1811.6.3.2.2, 1812.1.2.5.1, 1812.1.2.5.2, 1812.7.4.1, 1812.8.3, 1812.8.4, 1901.2, 1901.3, 1901.5, 1902.1, 1903.1, 1903.5, 1903.6, 1903.6.1, 1903.6.2, 1903.7, 1903.8, 1904.1, 1904.2, 1904.3, 1904.4, 1904.4.1, 1904.5, 1905.1, 1905.1.1, 1905.1.4, 1905.2, 1905.3, 1905.4, 1905.5, 1905.6, 1905.6.5.5, 1905.6.6, 1905.8.3, 1905.11.3, 1906.1, 1906.2, 1906.3, 1906.4, 1907.1, 1907.2, 1907.4.1, 1907.5.2.1, 1907.5.2.2, 1907.6, 1907.7.1, 1907.7.2, 1907.7.3, 1907.7.4, 1907.7.5, 1907.7.6, 1907.8, 1907.9, 1907.10, 1907.11, 1907.12, 1907.13, 1908.1, 1908.1.1, 1908.1.2, 1908.1.3, 1908.1.4, 1908.1.5, 1908.1.6, 1908.1.7, 1908.1.8, 1908.1.9, 1908.1.10, 1909.1, 1912.2, 1912.3.1, 2108.3, 2206.1, 2206.3, 3305.3.2
530—13 Building Code Requirements for Masonry Structures 1705.4.1, 1705.4.3
530.1—13 Specifications for Masonry Structures Table 1705.4.1, Table 1705.4.3, 2105.1
AISC American Institute of Steel Construction One East Wacker Drive, Suite 700 Chicago, IL 60601-18021
Standard reference number Title Referenced in code section number
ANSI/AISC 303—16 Code of Standard Practice for Steel Buildings and Bridges 2203.1, 2205.3.1
ANSI/AISC 341—16 Seismic Provisions for Structural Steel Buildings 1705.2.4.1, 1705.2.4.2, 1705.2.5, 1705.2.5.2, 2205.2.1.1, 2205.2.1.2, 2205.2.2, 2206.2.1, 2206.3
ANSI/AISC 360—16 Specification for Structural Steel Buildings 722.5.2.2.1, 1604.3.3, Table 1705.2, 1705.2.3, Table 1810.8, 2203.2, 2205.1, 2205.1.1, 2205.2.1.1, 2205.3, 2205.3.2, 2205.3.3, 2206.1, 2206.3, 3305.2
AISI American Iron and Steel Institute 25 Massachusetts Avenue, NW Suite 800 Washington, DC 20001
Standard reference number Title Referenced in code section number
AISI S100—16 North American Specification for the Design of Cold-formed Steel Structural Members 1908.1.5, 2203.1, 2203.2, 2210.1, 2210.2
AISI S220—15 North American Standard for Cold-formed Steel Framing-Nonstructural Members 2203.1, 2203.2, 2211.2, Table 2506.2, Table 2507.2
AISI S230—15 Standard for Cold-formed Steel Framing-Prescriptive Method for One- and Two-family Dwellings, 1609.1.1, 1609.1.1.1, 2211.1.2
AISI S240—15 North American Standard for Cold-Formed Steel Structural Framing, 2015 Table 1705.2.6, 2203.1, 2203.2, 2211.1, 2211.1.1.1, 2211.1.3.3, Table 2603.12.1, Table 2603.12.2
AISI S400—15/S1—16 North American Standard for Seismic Design of Cold-formed Steel Structural Systems, 2015, with Supplement 1, dated 2016 1604.3.3, Table 1613.5
AMCA Air Movement and Control Association International 30 West University Drive Arlington Heights, IL 60004
Standard reference number Title Referenced in code section number
540—13 Test Method for Louvers Impacted by Wind Borne Debris 1609.1.2.1
ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036
Standard reference number Title Referenced in code section number
A10.3—06* * As modified in Section 3311.4 Safety Requirements for Powder-actuated Fastening Systems 3311.3, 3311.4, 3311.4.1, 3311.4.2, 3311.4.3, 3311.4.4, 3311.4.5, 3311.4.6, 3311.4.7, 3311.4.8, 3311.4.9, 3311.4.10, 3311.4.11, 3311.4.12
A10.4—16 Safety Requirements for Personnel Hoists on Construction & Demolition Sites 3001.2, 3010.3
ANSI/ASSP A10.11—10* * As modified in Section 3308.6.2 Safety Requirements for Personnel and Debris Nets 202 (structural net), 3302.1, 3308.6.2, 3308.6.2.3, 3308.6.2.4, 3308.6.2.5, 3308.6.2.6, 3308.6.2.7, 3308.6.2.8, 3308.6.2.9, 3308.6.2.10, 3308.6.2.11, 3308.6.4
A13.1—2007 Scheme for the Identification of Piping Systems 415.11.6.5, 903.6, 905.11
A108.1A—99 Installation of Ceramic Tile in the Wet-set Method, with Portland Cement Mortar 2103.2.3
A108.1B—99 Installation of Ceramic Tile, quarry Tile on a Cured Portland Cement Mortar Setting Bed with Dry-set or Latex-Portland Mortar 2103.2.3
A108.4—99 Installation of Ceramic Tile with Organic Adhesives or Water-cleanable Tile-setting Epoxy Adhesive 2103.2.3.6
A108.5—99 Installation of Ceramic Tile with Dry-set Portland Cement Mortar or Latex-Portland Cement Mortar 2103.2.3.1, 2103.2.3.2
A108.6—99 Installation of Ceramic Tile with Chemical-resistant, Water Cleanable Tile-setting and -grouting Epoxy 2103.2.3.3
A108.8—99 Installation of Ceramic Tile with Chemical-resistant Furan Resin Mortar and Grout 2103.2.3.4
A108.9—99 Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout 2103.2.3.5
A108.10—99 Installation of Grout in Tilework 2103.2.3.7
A118.1—16 American National Standard Specifications for Dry-set Portland Cement Mortar 2103.2.3.1
A118.3—13 American National Standard Specifications for Chemical-resistant, Water-cleanable Tile-setting and -grouting Epoxy and Water Cleanable Tile-setting Epoxy Adhesive 2103.2.3.3
A118.4—16 American National Standard Specifications for Latex-Portland Cement Mortar 2103.2.3.2, 2103.3.2.4
A118.5—99 American National Standard Specifications for Chemical Resistant Furan Mortar and Grouts for Tile Installation 2103.2.3.4
A118.6—10 American National Standard Specifications for Cement Grouts for Tile Installation 2103.2.3.7
A118.8—99 American National Standard Specifications for Modified Epoxy Emulsion Mortar/Grout 2103.2.3.5
A136.1—08 American National Standard Specifications for Organic Adhesives for Installation of Ceramic Tile 2103.2.3.6
A137.1—12 American National Standard Specifications for Ceramic Tile 202 (porcelain tile)
A190.1—17 Standard for Wood Products - Structural Glued Laminated Timber 2303.1.3, 2306.1
A208.1—16 Particleboard 2303.1.8, 2303.1.8.1
E1.42—18 Entertainment Technology - Design, Installation, and Use of Orchestra Pit Lifts 3001.2
E1.46—18 Standard for the Prevention of Falls from Theatrical Stages and raised Performance Platforms 3001.2
Z97.1—14 Safety Glazing Materials Used in Buildings—Safety Performance Specifications and Methods of Test 2406.1.2, 2406.2, Table 2406.2(2), 2406.3.1, 2407.1, 2407.1.4.1, 2408.2.1, 2408.3, 2409.2, 2409.3, 2409.4.1
Z535.1—06 Safety Colors 1024.3.1, 1025.6.2
Z535.2—11 Environmental and Facility Safety Signs K1
APA APA-Engineered Wood Association 7011 South 19th Tacoma, WA 98466
Standard reference number Title Referenced in code section number
ANSI/A 190.1—17 Standard for Wood Products - Structural Glued Laminated Timber 2303.1.3, 2306.1
ANSI/APA PRP 210—14 Standard for Performance-Rated Engineered Wood Siding 2303.1.5, 2304.7, 2306.3
ANSI/APA PRR 410—16 Standard for Performance-Rated Engineered Wood Rim Boards 2303.1.13
APA PDS—12 Panel Design Specification 2306.1
APA PDS Supplement 1—14 Design and Fabrication of Plywood Curved Panels 2306.1
APA PDS Supplement 2—14 Design and Fabrication of Plywood-lumber Beams 2306.1
APA PDS Supplement 3—14 Design and Fabrication of Plywood Stressed-skin Panels 2306.1
APA PDS Supplement 4—14 Design and Fabrication of Plywood Sandwich Panels 2306.1
APA PDS Supplement 5 —14 Design and Fabrication of All-plywood Beams 2306.1
ANSI/APA PRG 320—18 Standard for Performance-Rated Cross-Laminated Timber Table 1705.5.6, 2303.1.4
EWS R540—13 Builders Tips: Proper Storage and Handling of Glulam Beams 2306.1
EWS S475—16 Glued Laminated Beam Design Tables 2306.1
EWS S560—14 Technical Note: Field Notching and Drilling of Glued Laminated Timber Beams 2306.1
EWS T300—16 Glulam Connection Details 2306.1
EWS X440—08 Product Guide: Glulam 2306.1
API American Petroleum Institute 200 Massachusetts Avenue NW Suite 1100 Washington, DC 20001-5571
Standard reference number Title Referenced in code section number
API Specification 5CT—2018 Casing and Tubing, 10th Ed, June 2018 1811.7.1.2
API Specification 5L—2018 Line Pipe 46th Ed, April 2018 1811.7.1.2
API Recommended Practice 13B-1—2019 Recommended Practice for Field Testing Water-based Drilling Fluids, 5th Ed, May 2019 1812.1.1.2.3
APSP The Association of Pool & Spa Professionals 2111 Eisenhower Avenue Alexandria, VA 22314
Standard reference number Title Referenced in code section number
ANSI/APSP 7—06 Standard for Suction Entrapment Avoidance in Swimming Pools, Wading Pools, Spas, Hot Tubs and Catch Basins 3109.3.1.1
AREMA American Railway Engineering and Maintenance-of-Way Association 10003 Derekwood Lane, Suite 210 Lanham, Maryland 20706
Standard reference number Title Referenced in code section number
AREMA—2020 Manual for Railway Engineering 1607.10.5
ASABE American Society of Agricultural and Biological Engineers 2950 Niles Road St. Joseph, MI 49085
Standard reference number Title Referenced in code section number
EP 484.2 June 1998 (R2008) Diaphragm Design of Metal-clad, Wood-frame Rectangular Buildings 2306.1
EP 486.2 OCT 2012 Shallow-post Foundation Design 2306.1
EP 559.1 2016 Design Requirements and Bending Properties for Mechanically Laminated Wood Assemblies 2306.1
ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191-4400
Standard reference number Title Referenced in code section number
5—13 Building Code Requirements for Masonry Structures 1405.6, 1405.6.2, 1405.10, 1705.4.1, Table 1705.4.1, 1705.4.3, Table 1705.4.3
6—13 Specification for Masonry Structures 1405.6.1, Table 1705.4.1, Table 1705.4.4, 2105.1
7—16* * As modified in Chapter 16 Minimum Design Loads and Associated Criteria for Buildings and Other Structures with Supplement No. 1 202 (floodproofing, dry; maximum considered earthquake geometric mean (MCEG) peak ground acceleration; risk-targeted maximum considered earthquake (MCER) ground motion response acceleration), 909.10.6, 1602.1, 1604.3, Table 1604.3, 1604.4, 1604.5, Table 1604.5, 1604.5.2, 1604.8.2, 1604.9, 1605.1, 1605.2.1, 1605.3.1, 1605.3.1.2, 1607.8.1, 1607.8.1.1, 1607.8.1.2, 1607.9, 1608.1, 1608.3, 1609.1.1, 1609.1.2, 1609.1.6.1, 1609.1.6.2, 1609.5.3, 1609.7.1, 1611.2, 1612.1, 1613.1, 1613.3.1, 1613.3.2, 1613.3.3, 1613.3.4.1, 1613.3.4.1.1, 1613.3.5, 1613.3.5.1, 1613.3.5.2, 1613.4, 1613.5, Table 1613.5, 1613.6, 1614.1, 1705.12, 1705.13, 1801.2.1, 1810.9.1.1, 1810.9.2.2, 1810.9.2.4, 1811.6.3.2.1, 1811.6.3.2.2, 1816.2.1, 1901.2, 1905.1.1, 1905.1.2, 1905.1.8, 1908.1.1, 1908.1.2, 1908.1.5, 1908.1.6, 2209.1, 2210.2, 2304.6.1, Table 2306.3(3), Table 2308.7.5, 2404.1, 2505.1, 2505.2, 2506.2.1, G104.2.3.2, G304.2, G402
8—17 Standard Specification for the Design of Cold-formed Stainless Steel Structural Members 1604.3.3, 2210.1, 2210.2
19—16 Structural Applications of Steel Cables for Buildings 2208.1
24—14* * As modified in Appendix G Flood Resistant Design and Construction 202 (design flood elevation), 3001.2, G101.3, G102.1, G103.1, G104.2.1, G104.2.3.1, G104.2.3.2, G107.2, G107.3, G301.1, G303.3, G303.4, G303.5, G303.8, G304.1, G304.1.1, G304.1.2, G304.2, G304.3, G304.4.1.1, G305.2, G307.1, G307.2, G307.3, G308.1, G308.3, G308.5, G308.6, G308.7, G309.1, G310.3, G310.6
29—14 Standard Calculation Methods for Structural Fire Protection 722.1
32—17 Design and Construction of Frost Protected Shallow Foundations 1809.3.1
49—12 Wind Tunnel Testing for Buildings and Other Structures 1609.1.6.3
55—10 Tensile Membrane Structures 3102.7.3
ASME American Society of Mechanical Engineers Two Park Avenue New York, NY 10016-5990
Standard reference number Title Referenced in code section number
ASME/A17.1—13* CSA B44—2013 * As modified in Appendix K Safety Code for Elevators and Escalators 907.3.3, 911.1.6, 1009.4, 1607.10.1, 2409.2, 2409.3, 2409.4, 2409.4.1 3001.2, 3001.4, 3002.1.2, 3002.4.3.1, 3002.4.3.2, 3002.4.3.3, 3002.5, 3002.8, 3003.2, 3003.3.1, 3007.1, 3008.1.3, 3008.8.1, 3009.3, K1
A17.2—2014 Guide for Inspection of Elevators, Escalators & Moving Walks 3001.2
A17.3—2015* * As modified in Appendix K Safety Code for Existing Elevators And Escalators 3001.2, K3
A17.5—2013 Elevator and Escalator Electrical Equipment 3001.2
A17.6—2010 Standard for Elevator Suspension, Compensation, and Governor Systems 3001.2
A17.7—2007/ CSA B44—07 Performance-Based Safety Code for Elevators and Escalators 3001.2
A18.1—2017 Safety Standard for Platform Lifts and Stairway Chairlifts 1109.7.1, 1109.7.1.1, 3001.2
A90.1—09 Safety Standard for Belt Manlifts 3001.2
B16.18—2012 Cast Copper Alloy Solder Joint Pressure Fittings 909.13.1
B16.22—2001(R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings 909.13.1
B20.1—2015* * As modified in Appendix K Safety Standard for Conveyors and Related Equipment 3001.2, 3004.3
B31.3—2012 Process Piping 415.11.6
ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428-2959
Standard reference number Title Referenced in code section number
A 6/A 6M—14 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes and Sheet Piling 1811.7.1, 1811.7.3, 1811.7.6
A 36/A 36M—14 Specification for Carbon Structural Steel 1811.7.1
A 153/A 153M—16a Specification for Zinc Coating (Hot-dip) on Iron and Steel Hardware 2304.10.5
A 240/A 240M—13A Standard Specification for Chromium and Chromium-nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and for General Applications Table 1507.4.3(1)
A 252—10 Specification for Welded and Seamless Steel Pipe Piles 1811.7.1, 1811.7.1.2, 1812.6.1
A 283/A 283M—13 Specification for Low and Intermediate Tensile Strength Carbon Steel Plates 1811.7.1, 1812.6.1
A 416/A 416M—15 Specification for Steel Strand, Uncoated Seven-wire for Prestressed Concrete 1811.6.3.1, 1815.3
A 463/A 463M—10 Standard Specification for Steel Sheet, Aluminum-coated, by the Hot-dip Process Table 1507.4.3(2)
A 572/A 572M—15 Specification for High-strength Low-alloy Columbium-Vanadium Structural Steel 1811.7.1
A 588/A 588M—15 Specification for High-strength Low-alloy Structural Steel with 50 ksi (345 MPa) Minimum Yield Point with Atmospheric Corrosion Resistance 1811.7.1
A 615/A 615M—15ae1 Specification for Deformed and Plain Billet-steel Bars for Concrete Reinforcement 1812.7.2.1, 1812.8.1
A 653—15 Specification for Steel Sheet, Zinc-coated or Zinc-iron Alloy-coated Galvannealed by the Hot-dip Process 2304.10.5.1
A 653/A 653M—11 Specification for Steel Sheet, Zinc-coated Galvanized or Zinc-iron Alloy-coated Galvannealed by the Hot-dip Process Table 1507.4.3(1), Table 1507.4.3(2)
A 690/A 690M—13a Standard Specification for High-strength Low-alloy Nickel, Copper, Phosphorus Steel H-piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments 1811.7.1
A706/A706M—15 Specification for Low-alloy Steel Deformed and Plain Bars for Concrete Reinforcement 1705.3.1, 1903.5.2, 2107.3
A 722/A 722M—15 Specification for Uncoated High-strength Steel Bar for Prestressing Concrete 1812.7.2.1, 1812.8.1, 1815.3
A 755/A 755M—2011 Specification for Steel Sheet, Metallic-coated by the Hot-dip Process and Prepainted by the Coil-coating Process for Exterior Exposed Building Products Table 1507.4.3(1), Table 1507.4.3(2)
A 792/A 792M—10 Specification for Steel Sheet, 55% Aluminum-zinc Alloy-coated by the (Hot-dip) Process Table 1507.4.3(1), Table 1507.4.3(2)
A 875/A 875M—13 Standard Specification for Steel Sheet Zinc-5 percent, Aluminum Alloy-coated by the (Hot-dip) Process Table 1507.4.3(2)
A 822—04a (2010) Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand 1815.3
A 924/A 924M—13 Standard Specification for General Requirements for Steel Sheet, Metallic-coated by the Hot-dip Process Table 1507.4.3(1)
B 42—10 Specification for Seamless Copper Pipe, Standard Sizes 909.13.1
B 43—09 Specification for Seamless Red Brass Pipe, Standard Sizes 909.13.1
B 68—11 Specification for Seamless Copper Tube, Bright Annealed (Metric) 909.13.1
B 88—09 Specification for Seamless Copper Water Tube 909.13.1
B 101—12 Specification for Lead-coated Copper Sheet and Strip for Building Construction 1404.5.3, Table 1507.2.9.2, Table 1507.4.3(1)
B 209—10 Specification for Aluminum and Aluminum Alloy Steel and Plate Table 1507.4.3(1)
B 251—10 Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube 909.13.1
B 280—08 Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service 909.13.1
B 370—12 Specification for Copper Sheet and Strip for Building Construction 1404.5.2, Table 1507.2.9.2, Table 1507.4.3(1)
B 695—04 (2016) Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel 2304.10.5.1, 2304.10.5.3
C 5—10 Specification for Quicklime for Structural Purposes Table 2507.2
C 22/C 22M-00 (2010) Specification for Gypsum Table 2506.2
C 27—98 (2013) Specification for Classification of Fireclay and High-alumina Refractory Brick 2111.6, 2111.9
C 28/C 28M—10 Specification for Gypsum Plasters Table 2507.2
C 31/C 31M—15 Practice for Making and Curing Concrete Test Specimens in the Field Table 1705.8.1 1905.1.3, 1905.6.3.3, 1905.6.3.3.1, 1905.6.3.8, 1905.6.4.2, 3305.3.5.6
C 33/C 33M—13 Specification for Concrete Aggregates 722.3.1.4, 722.4.1.1.3
C 35/C 35M—1995 (2009) Specification for Inorganic Aggregates for Use in Gypsum Plaster Table 2507.2
C 39/C 39M—14a Test Method for Compressive Strength of Cylindrical Concrete Specimens 1812.1.1.2.2, 1905.6.3.3.3, 1911.5.2, 1911.10.3
C 42/C 42M—13 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete 1905.6.5.2, 1911.5.1, 1911.10, 1911.10.1
C 55—2011 Specification for Concrete Building Brick Table 722.3.2
C 59/C 59M—00 (2011) Specification for Gypsum Casting Plaster and Molding Plaster Table 2507.2
C 61/C 61M—00 (2011) Specification for Gypsum Keene's Cement Table 2507.2
C 67—13 Test Methods of Sampling and Testing Brick and Structural Clay Tile 721.4.1.1.1
C 73—10 Specification for Calcium Silicate Brick (Sand-lime Brick) Table 722.3.2
C 90—13 Specification for Loadbearing Concrete Masonry Units Table 722.3.2
C 91—12 Specification for Masonry Cement Table 2507.2
C 94/C 94M—15 Specification for Ready-Mixed Concrete 110.3.1, 1905.1.3, 1905.6.3.8, 1905.8.2
C 138/C 138M—17a Standard Test Method for Density (Unit Weight) Yield and Air Content (Gravimetric) of Concrete 1812.1.1.2.3, 1905.6.3.6
C 140—13 Test Method Sampling and Testing Concrete Masonry Units and Related Units 722.3.1.2
C 143—15a Standard Test Method for Slump of Hydraulic-cement Concrete 1905.6.3.6
C 150—15 Specification for Portland Cement Table 1904.4.2 Table 2507.2
C 172/C 172M—14a Practice for Sampling Freshly Mixed Concrete Table 1705.3 1905.6.3.2
C 173/C 173M—14 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method 1905.6.3.6
C 199—84 (2016) Test Method for Pier Test for Refractory Mortars 2111.6, 2111.9, 2113.12
C 206—13 Specification for Finishing Hydrated Lime Table 2507.2
C 208—12 Specification for Cellulosic Fiber Insulating Board Table 1508.2, 2303.1.6
C 216—13 Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) Table 721.1(2),
C 231/C 231M—14 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method 1905.6.3.6
C 260/C 260M—10a (2016) Standard Specification for Air-entraining Admixtures for Concrete 1905.3.4
C 270—14a Specification for Mortar for Unit Masonry 2103.2.4
C 315—07 (2016) Specification for Clay Flue Liners and Chimney Pots 2111.9, 2113.11.1, Table 2113.16(1), Table 2113.16(2)
C 317/C 317M—00 (2010) Specification for Gypsum Concrete 2514.1
C 330/C 330M—2014 Specification for Lightweight Aggregates for Structural Concrete 202 (concrete, lightweight aggregate; concrete, sand- lightweight), 1905.1.4
C 331/C 331M—2010 Specification for Lightweight Aggregates for Concrete Masonry Units 722.3.1.4, 722.4.1.1.3
C 406/C 406M—2010 Specification for Roofing Slate 1507.7.5
C 472—99 (2009) Specification for Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete Table 2506.2
C 473—12 Test Method for Physical Testing of Gypsum Panel Products Table 2506.2
C 474—13 Test Methods for Joint Treatment Materials for Gypsum Board Construction Table 2506.2
C 475/C 475M—12 Specification for Joint Compound and Joint Tape for Finishing Gypsum Board Table 2506.2
C 476—18 Specification for Grout for Masonry 202 (grout)
C 494—13 Standard Specification for Chemical Admixtures for Concrete 1905.3.4
C 511—13 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes 1905.6.3.3.2
C 514—04 (2009)e1 Specification for Nails for the Application of Gypsum Board Table 721.1(2), Table 721.1(3), Table 2506.2
C 516—08 Specifications for Vermiculite Loose Fill Thermal Insulation 722.3.1.4, 722.4.1.1.3
C 547—12 Specification for Mineral Fiber Pipe Insulation Table 721.1(2), Table 721.1(3)
C 549—06 (2012) Specification for Perlite Loose Fill Insulation 722.3.1.4, 722.4.1.1.3
C 552—12b Standard Specification for Cellular Glass Thermal Insulation Table 1508.2
C 557—03 (2009) Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing Table 2506.2
C 578—12b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation Table 1508.2, 2603.10
C 587—04 (2009) Specification for Gypsum Veneer Plaster Table 2507.2
C 595/C 595M—14e1 Specification for Blended Hydraulic Cements Table 1904.4.2, Table 2507.2
C 618—12a Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete Table 1904.4.2
C 631—09 Specification for Bonding Compounds for Interior Gypsum Plastering Table 2507.2
C 635—00* * As modified in Appendix R Specification for the Manufacture, Performance and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings 808.1.1.1, R101.1, R102.1, R102.2, R102.3, Q102.1
C 636—96* * As modified in Appendix R Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels 808.1.1.1, R101.1, R103.1, R103.2, R103.3, R103.4, R103.5, R103.6, R103.7, R103.8, R103.9, R103.10, R103.11, R103.12, R103.13, R103.14
C 645—13 Specification for Nonstructural Steel Framing Members Table 2506.2, Table 2507.2
C 685—11 Standard Specification for Concrete Made by Volumetric Batching 1905.8.2
C 726—12 Standard Specification for Mineral Roof Insulation Board Table 1508.2
C 728—05 (2013) Standard Specification for Perlite Thermal Insulation Board Table 1508.2
C 744—11 Specification for Prefaced Concrete and Calcium Silicate Masonry Units Table 722.3.2
C 754—11 Specification for Installation of Steel Framing Members to Receive Screw-attached Gypsum Panel Products Table 2508.1, Table 2511.1.1
C 836/C 836M—12 Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course 1507.15.2
C 840—11 Specification for Application and Finishing of Gypsum Board Table 2508.1, 2509.2
C 841—03 (2008)E1 Specification for Installation of Interior Lathing and Furring Table 2508.1, Table 2511.1.1
C 842—05 (2010)E1 Specification for Application of Interior Gypsum Plaster Table 2511.1.1, 2511.3, 2511.4
C 843—99 (2012) Specification for Application of Gypsum Veneer Plaster Table 2511.1.1
C 844—04 (2010) Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster Table 2508.1
C 845/C 845M—12 Standard Specification for Expansive Hydraulic Cement Table 1904.4.2
C 847—12 Specification for Metal Lath Table 2507.2
C 887—13 Specification for Packaged, Dry Combined Materials for Surface Bonding Mortar 2103.2.2
C 897—05 (2009) Specification for Aggregate for Job-Mixed Portland Cement-based Plaster Table 2507.2
C 920—11 Standard for Specification for Elastomeric Joint Sealants Table 2506.2
C 926—13 Specification for Application of Portland Cement-based Plaster 2510.3, Table 2511.1.1, 2511.3, 2511.4, 2512.1, 2512.1.2, 2512.2, 2512.6, 2512.8.2, 2512.9, 2513.7
C 932—06 (2013) Specification for Surface-applied Bonding Compounds for Exterior Plastering Table 2507.2
C 933—13 Specification for Welded Wire Lath Table 2507.2
C 946—10 Specification for Construction of Dry-stacked, Surface-bonded Walls 2103.2.2, 2109.2.2
C 954—11 Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 inch (0.84 mm) to 0.112 inch (2.84 mm) in Thickness Table 2506.2, Table 2507.2
C 955—11C Standard Specification for Load-bearing Transverse and Axial Steel Studs, Runners Tracks, and Bracing or Bridging, for Screw Application of Gypsum Panel Products and Metal Plaster Bases Table 2506.2, Table 2507.2
C 956—04 (2010) Specification for Installation of Cast-in-place Reinforced Gypsum Concrete 2514.1
C 957—10 Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane with Integral Wearing Surface 1507.15.2
C 989/C 989M—13 Standard Specification for Slag Cement for Use in Concrete and Mortars Table 1904.4.2
C 1002—07 Specification for Steel Self-piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs Table 2506.2, Table 2507.2
C 1007—11a Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories Table 2508.1, Table 2511.1.1
C 1029—13 Specification for Spray-applied Rigid Cellular Polyurethane Thermal Insulation 1507.14.2
C 1032—06(2011) Specification for Woven Wire Plaster Base Table 2507.2
C 1047—10A Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base Table 2506.2, Table 2507.2
C 1063—12D Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-based Plaster 2510.3, Table 2511.1.1, 2512.1.1
C 1064/C 1064M—17 Standard Test Method for Temperature of Freshly Mixed Hydraulic-cement Concrete 1905.6.3.6
C 1074—19 Standard Practice for Estimating Concrete Strength by the Maturity Method 3305.3.5.1.3
C 1088—13 Specification for Thin Veneer Brick Units Made from Clay or Shale Table 721.1(2)
C 1157/C 1157M—11 Standard Performance Specification for Hydraulic Cement Table 1904.4.2, Table 2507.2
C 1167—11 Specification for Clay Roof Tiles 1507.3.4
C 1177/C 1177M—08 Specification for Glass Mat Gypsum Substrate for Use as Sheathing Figure 722.5.1(2), Figure 722.5.1(3), Table 1508.2, Table 2506.2
C 1178/C 1178M—11 Specification for Coated Mat Water-resistant Gypsum Backing Panel Figure 722.5.1(2), Figure 722.5.1(3), Table 2506.2, Table 2509.2
C 1186—08 (2012) Specification for Flat Fiber Cement Sheets 1404.10, 1405.16.1, 1405.16.2
C 1240—14 Standard Specification for Silica Fume Used in Cementitious Mixtures Table 1904.4.2
C 1261—10 Specification for Firebox Brick for Residential Fireplaces 2111.6, 2111.9
C 1278M—07a (2011) Specification for Fiber-reinforced Gypsum Panels Figure 722.5.1(2), Figure 722.5.1(3), Table 1508.2, Table 2506.2
C 1280—13 Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing Table 2508.1, 2508.2
C 1283—11 Practice for Installing Clay Flue Lining 2113.9.1, 2113.12
C 1288—99 (2010) Standard Specification for Discrete Nonasbestos Fiber-cement Interior Substrate Sheets Table 2509.2
C 1289—13E1 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board Table 1508.2, 2603.10
C 1313/C 1313M—12 Standard Specification for Sheet Radiant Barriers for Building Construction Applications 1509.4
C 1325—08b Standard Specification for Nonasbestos Fiber-mat Reinforced Cement Backer Units Table 2509.2
C 1328/C1328M—12 Specification for Plastic (Stucco Cement) Table 2507.2
C 1364—10B Standard Specification for Architectural Cast Stone 2103.1
C 1371—04a (2010)e1 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers 1504.9
C 1386—07 Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units 202 (autoclaved aerated concrete (aac)), 2102.1,
C 1396M/C 1396M—13 Specification for Gypsum Board Table 2506.2, Table 2508.1 Figure 722.5.1(2), Figure 722.5.1(3)
C 1492—03 (2009) Standard Specification for Concrete Roof Tile 1507.3.5
C 1549—09 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer 1504.9
C 1600/C 1600M—11 Standard Specification for Rapid Hardening Hydraulic Cement Table 2507.2
C 1629/C 1629M—06 (2011) Standard Classification for Abuse-resistant Nondecorated Interior Gypsum Panel Products and Fiber-reinforced Cement Panels 403.2.3.1, 403.2.3.2, 403.2.3.4
C 1658/C 1658M—12 Standard Specification for Glass Mat Gypsum Panels Figure 722.5.1(2), Figure 722.5.1(3), Table 2506.2
C 1670—16 Standard Specification for Adhered Manufactured Stone Masonry Veneer Units 2103.1
D 25—12 (2017) Specification for Round Timber Piles 1811.5.1, 1811.5.4, 2303.1.12
D 41—05 Specification for Asphalt Primer Used in Roofing, Dampproofing and Waterproofing Table 1507.10.2
D 43—00 (2006) Specification for Coal Tar Primer Used in Roofing, Dampproofing and Waterproofing Table 1507.10.2
D 56—05 (2010) Test Method for Flash Point By Tag Closed Tester 202 (flashpoint)
D 86—2012 Test Method for Distillation of Petroleum Products at Atmospheric Pressure 202 (boiling point)
D 93—2012 Test Method for Flash Point By Pensky-Martens Closed Cup Tester 202 (flashpoint)
D 225—07 Specification for Asphalt Shingles (Organic Felt) Surfaced with Mineral Granules 1507.2.5
D 226/D 226M—09 Specification for Asphalt-saturated Organic Felt Used in Roofing and Waterproofing 1404.2, 1505.2, 1507.2.3, 1507.3.3, 1507.5.3, 1507.6.3, 1507.7.3, Table 1507.8, 1507.8.3, 1507.9.3, 1507.9.5, Table 1507.10.2, 1507.17.3, 1507.17.4.1
D 227/D 227M—03 (2011)E1 Specification for Coal-tar-saturated Organic Felt Used in Roofing and Waterproofing Table 1507.10.2
D 312—00 (2006) Specification for Asphalt Used in Roofing Table 1507.10.2
D 448—08 Standard Classification for Sizes of Aggregate for Road and Bridge Construction 1507.12.3, 1507.13.3
D 450—07 Specification for Coal-tar Pitch Used in Roofing, Dampproofing and Waterproofing Table 1507.10.2
D 635—10 Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position 2606.4, H107.1.1, H117.4
D 692/D 692M—15 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures 1913.2
D 1073—16 Standard Specification for Fine Aggregate for Asphalt Paving Mixtures 1913.2
D 1143/D 1143M—07 (2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load 1810.4.1.3, 1810.4.1.5.1, 1814.4.1
D 1227—95 (2007) Specification for Emulsified Asphalt Used as a Protective Coating for Roofing Table 1507.10.2, 1507.15.2
D 1557—12e1 Test Method for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lb/ ft3 (2,700 KN m/m3)) 1806.2.2
D 1586—18 Specification for Penetration Test and Split-barrel Sampling of Soils 1613.3.4.1, 1803.5
D 1587—15 Standard Practice for Thin-walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes 1803.5
D 1761—12 Test Method for Mechanical Fasteners in Wood 1712.1.1, 1712.1.2, 1712.1.3
D 1863/D 1863M—05 (2011)E1 Specification for Mineral Aggregate Used on Built-up Roofs Table 1507.10.2
D 1929—12 Test Method for Determining Ignition Temperature of Plastics 402.6.4.4, 1407.11.2.1, 2606.4
D 1970/D 1970M—2013 Specification for Self-adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roof Underlayment for Ice Dam Protection 1507.2.3 1507.2.4, 1507.2.9.2, 1507.3.9, 1507.5.7, 1507.8.8, 1507.9.9, 1507.17.4.1
D 2113—14 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation 1803.5
D 2166—16 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil 1613.3.4.1
D 2178—04 Specification for Asphalt Glass Felt Used in Roofing and Waterproofing Table 1507.10.2
D 2216—19 Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass 1613.3.4.1
D 2487—2017 Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) Table 1610.1, 1803.3
D 2626/D 2626M—04 (2012)E1 Specification for Asphalt Saturated and Coated Organic Felt Base Sheet Used in Roofing 1507.3.3, Table 1507.10.2
D 2822/D 2822M—05 (2011)E1 Specification for Asphalt Roof Cement, Asbestos Containing Table 1507.10.2
D 2823/D 2823M—05 (2011)E1 Specification for Asphalt Roof Coatings, Asbestos Containing Table 1507.10.2
D 2824—06 (2012)E1 Standard Specification for Aluminum-Pigmented Asphalt Roof Coating, Nonfibered, Asbestos Fibered and Fibered without Asbestos Table 1507.10.2
D 2843—10 Test for Density of Smoke from the Burning or Decomposition of Plastics 2606.4
D 2850—15 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils 1613.3.4.1
D 2898—10 (2017) Test Methods for Accelerated Weathering of Fire-retardant-treated Wood for Fire Testing 1505.1, 2303.2.4, 2303.2.6
D 3019—08 Specification for Lap Cement Used with Asphalt Roll Roofing, Nonfibered, Asbestos Fibered and Nonasbestos Fibered Table 1507.10.2
D 3161/D 3161M—13 Test Method for a Wind Resistance of Asphalt Shingles (Fan Induced Method) 1504.1.1, Table 1504.1.1, 1507.17.8
D 3200—74 (2017) Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles 2303.1.12
D 3201—2013 Test Method for Hygroscopic Properties of Fire-retardant Wood and Wood-based Products 2303.2.7
D 3273—12 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber 2506.3
D 3278—1996 (2011) Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus 202 (flashpoint)
D 3441—2016 Standard Test Method for Mechanical Cone Penetration Testing of Soils 1803.5.2
D 3462/D 3462M—10A Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules 1507.2.5
D 3468—99 (2006)e01 Specification for Liquid-applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing 1507.15.2
D 3679—11 Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding 1404.9, 1405.14
D 3689—07(2013)E1 Test Methods for Deep Foundations Under Static Axial Tensile Load 1810.4.2.1, 1814.4.2
D 3737—2018 Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) 2303.1.3
D 3746—85 (2008) Test Method for Impact Resistance of Bituminous Roofing Systems 1504.7
D 3747—79 (2007) Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation Table 1507.10.2
D 3909/D 3909M—97b (2012)e1 Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules 1507.2.9.2, 1507.6.5, Table 1507.10.2
D 3957—09 (2015) Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings 2303.1.11
D 3966—07 (2013)E1 Standard Test Methods for Deep Foundations Under Lateral Loads 1810.4.3, 1810.4.3.3
D 4022/D 4022M—2007 (2012)E1 Specification for Coal Tar Roof Cement, Asbestos Containing Table 1507.10.2
D 4272—09 Test Method for Total Energy Impact of Plastic Films by Dart Drop 1504.7
D 4318—2013E1 Test Methods for Liquid Limit, Plastic Limit and Plasticity Index of Soils 1613.3.4.1
D 4434/D 4434M—12 Specification for Poly (Vinyl Chloride) Sheet Roofing 1507.13.2
D 4479/D 4479M—07 (2012)E1 Specification for Asphalt Roof Coatings-Asbestos-free Table 1507.10.2
D 4586/D 4586M—07 (2012)E1 Specification for Asphalt Roof Cement-Asbestos-free Table 1507.10.2
D 4601/D 4601M—04 (2012)E1 Specification for Asphalt-coated Glass Fiber Base Sheet Used in Roofing Table 1507.10.2
D 4637/D 4637M—13 Specification for EPDM Sheet Used in Single-ply Roof Membrane 1507.12.2
D 4869/D 4869M—05 (2011)e01 Specification for Asphalt-saturated (Organic Felt) Underlayment Used in Steep Slope Roofing 1507.2.3, 1507.5.3, 1507.6.3, 1507.7.3, 1507.8.3, 1507.9.3, 1507.17.3, 1507.17.4.1
D 4897/D 4897M—01 (2009) Specification for Asphalt-coated Glass Fiber Venting Base Sheet Used in Roofing Table 1507.10.2
D 4990—97a (2005)e01 Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing Table 1507.10.2
D 4945—17 Test Method for High-strain Dynamic Testing of Piles 1810.4.1.4
D 5019—07a Specification for Reinforced Nonvulcanized Polymeric Sheet Used in Roofing Membrane 1507.12.2
D 5034—09 (2017) Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) 3308.6.3
D 5035—11 (2019) Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) 3308.6.3
D 5055—16 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-joists 2303.1.2
D 5096—2002 (2017) Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer 3314.4.4.6, 3316.7.8.5, 3319.13.2
D 5456—17E1 Specification for Evaluation of Structural Composite Lumber Products Table 1705.5.6, 2303.1.10
D 5516—17 Test Method of Evaluating the Flexural Properties of Fire-retardant-treated Softwood Plywood Exposed to the Elevated Temperatures 2303.2.5.1
D 5643/D 5643M—06 (2012)E1 Specification for Coal Tar Roof Cement, Asbestos-free Table 1507.10.2
D 5664—17 Standard Test Method for Evaluating the Effects of Fire-retardant Treatment and Elevated Temperatures on Strength Properties of Fire-retardant Treated Lumber 2303.2.5.2
D 5665—99a (2006) Specification for Thermoplastic Fabrics Used in Cold-applied Roofing and Waterproofing Table 1507.10.2
D 5726—98 (2005) Specification for Thermoplastic Fabrics Used in Hot-applied Roofing and Waterproofing Table 1507.10.2
D 5778—12 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils 1803.5.2
D 6066—11 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential 1816.2
D 6083—05e01 Specification for Liquid Applied Acrylic Coating Used in Roofing Table 1507.10.2, Table 1507.14.3, 1507.15.2
D 6162—2000A (2008) Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements 1507.11.2
D 6163—00 (2008) Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements 1507.11.2
D 6164/D 6164M—11 Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Metal Materials Using Polyester Reinforcements 1507.11.2
D 6222/D 6222M—11 Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements 1507.11.2
D 6223/D 6223M—02 (2011)E1 Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements 1507.11.2
D 6298—05e1 Specification for Fiberglass Reinforced Styrene-butadiene-styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface 1507.11.2
D 6305—08 (2015)E1 Practice for Calculating Bending Strength Design Adjustment Factors for Fire-retardant-treated Plywood Roof Sheathing 2303.2.5.1
D 6380—03 (2009) Standard Specification for Asphalt Roll Roofing (Organic) Felt 1507.2.9.2, 1507.3.3, 1507.6.5
D 6509/D 6509M—09 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous base Sheet Materials Using Glass Fiber Reinforcements 1507.11.2
D 6694—08 Standard Specification for Liquid-applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems Table 1507.14.3, 1507.15.2
D 6754/D 6745M—10 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing 1507.13.2
D 6757—2013 Standard Specification for Underlayment for Use with Steep Slope Roofing 1507.2.3, 1507.17.3, 1507.17.4.1
D 6841—16 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-retardant-treated Lumber 2303.2.5.2
D 6878/D 6878M—11a Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing 1507.13.2
D 6947—07 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System Table 1507.14.3, 1507.15.2
D 7032—10a Standard Specification for Establishing Performance Ratings for Wood, Plastic Composite Deck Boards and Guardrail Systems (Guards or Rails) 2612.2.1, 2612.2.2, 2612.4, 2612.5.1
D 7147—11 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers 2303.5, 2304.10.3
D 7158/D 7158M—11 Standard Test Method for Wind Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method) 1504.1.1, Table 1504.1.1
D 7254—07 Standard Specification for polypropylene (PP) siding 1404.12
D 7655—12 Standard Classification for Size of Aggregate Used as Ballast for Roof Membrane Systems 1507.12.3, 1507.13.3
D 7672—2014 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies 2303.1.3
E 84—2013A Test Methods for Surface Burning Characteristics of Building Materials 202 (flame spread index; smoke- developed index), 402.6.4.4, 402.6.2, 703.5.2, 720.1, 720.1.1, 720.1.2, 720.4, 803.1.1, 803.1.4, 803.1.4.1, 803.10, 803.11, 806.7, 1404.12.1, 1510.10.3, 2303.2, 2603.3, 2603.4.1.13, 2606.3.5.4, 2603.5.5, 2603.7, 2603.7.1, 2603.7.3, 2604.2.4, 2606.4, 2612.3, 2614.3, 3105.3, K1
E 90—09 Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements 1207.2, 1207.2.1
E 108—2011 Test Methods for Fire Tests of Roof Coverings 1505.1, 2603.6, 2610.2, 2610.3
E 119—2012A Standard Test Methods for Fire Tests of Building Construction and Materials 703.2, 703.2.1, 703.2.3, 703.2.5, 703.3, 703.4, 703.6, 704.12, 705.7, 705.8.5, 707.6, 712.1.13.2, 714.3.1, 714.4.1, 715.1, 715.4, 716.2, Table 716.3, Table 716.5, 716.5.6, 716.5.8.1.1, Table 716.6, 716.6.7.1, 717.3.1, 717.5.2, 717.5.3, 717.6.1, 716.6.2.1, Table 721.1(1), 1407.10, 1409.10, 2103.1, 2603.4, 2603.5.1, 2603.5.2
E 136—2012 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C 703.5.1, 720.1.1
E 330—02 Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference 1705.9.2
E 331—00 (2009) Test Method for Water Penetration of Exterior Windows, Skylights, Doors and Curtain Walls by Uniform Static Air Pressure Difference 1403.2
E 336—05 Standard Test Method for Measurement of Airborne Sound Insulation in Buildings 1207.2
E 408—13 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-meter Techniques 1504.9
E 492—09 Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-ceiling Assemblies Using the Tapping Machine 1207.3
E 605—93 (2011) Test Method for Thickness and Density of Sprayed Fire-resistive Material (SFRM) Applied to Structural Members 1705.14.4.1, 1705.14.4.2, 1705.14.4.5, 1705.14.5
E 648—06a Standard Test Method for Critical Radiant Flux of Floor-covering Systems Using a Radiant Heat Energy Source 804.2
E 681—2009 Test Methods for Concentration Limits of Flammability of Chemical Vapors and Gases 202 (flammable gas)
E 736—00 (2011) Test Method for Cohesion/Adhesion of Sprayed Fire-resistive Materials Applied to Structural Members 704.13.2, 1705.14.6
E 814—2013 Test Method of Fire Tests of Through-penetration Firestops 202 (f rating; t rating), 714.3.1.2, 714.3.2, 714.4.1.2
E 970—2010 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source 720.3.1
E 1007—97 Test Method for Field Measurement of Tapping Machine Impact Sound Transmission through Floor-ceiling Assemblies and Associated Support Structures 1207.3
E 1300—12AE1 Practice for Determining Load Resistance of Glass in Buildings 2404.1
E 1354—2013 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter 424.2
E 1592—05 (2012) Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference 1504.3.2
E 1602—02 (2010)E1 Guide for Construction of Solid Fuel-burning Masonry Heaters 2112.2
E 1886—13A Test Method for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Missiles and Exposed to Cyclic Pressure Differentials 1609.1.2
E 1918—16 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-sloped Surfaces in the Field 1504.9
E 1966—07A (2011) Test Method for Fire-resistant Joint Systems 202 (fire-resistant joint system), 715.3
E 1980—11 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-sloped Opaque Surfaces 1504.9
E 1996—2014a* * As modified in Chapter 16 Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes 1609.1.2, 1609.1.2.2
E 2072—10 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings 1025.4, Figure S101.1(2), Figure S101.1(3), Figure S101.1(4), Figure S101.1(5), Figure S101.1(6), Figure S101.1(7), Figure S101.1(8)
E 2174—10AE1 Standard Practice for On-Site Inspection of Installed Fire Stops 1705.17.1
E 2273—03 (2011) Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies 1408.4.1
E 2307—2010 Standard Test Method for Determining Fire Resistance of a Perimeter Joint System Between an Exterior Wall Assembly and Floor Assembly Using the Intermediate-scale, Multistory Test Apparatus 715.4
E 2353—2014 Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards and Balustrades 2407.1.2
E 2393—10A Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barrier 1705.17.2
E 2404—2013E1 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics 803.1.4
E 2556—10 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment 2510.6
E 2568—09e1 Standard Specification for PB Exterior Insulation and Finish Systems 1408.2
E 2570—07 Standard Test Method for Evaluating Water-resistive Barrier (WRB) Coatings Used Under Exterior Insulation and Finish Systems (EIFS) for EIFS with Drainage 1408.4.1.1, 1705.16
E 2573—12 Standard Practice for Specimen Preparation and Mounting of Site-fabricated Stretch Systems to Assess Surface Burning Characteristics 803.10
E 2599—11 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics 2614.3
E 2634—11 (2015) Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems 1903.4
E 2751—13 Standard Practice for Design and Performance of Supported Glass Walkways 2409.1
F 547—2012 Terminology of Nails for Use with Wood and Wood-based Materials Table 2506.2
F 1346—91 (2003) Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs 3109.3.2.1, 3109.4, 3109.5.1.8, 3109.6
F 1667—2015 Specification for Driven Fasteners: Nails, Spikes and Staples Table 721.1(2), Table 721.1(3), 1507.2.6, 1507.17.5, 2303.6, Table 2304.10.1, 2304.10.5, Table 2506.2
F 2090—10 Specification for Window Fall Prevention Devices with Emergency Escape (Egress) Release Mechanisms 1015.8
F 2200—2013 Standard Specification for Automated Vehicular Gate Construction 3110.3
F 2208—08 Standard Safety Specification for Residential Pool Alarms 3109.3.2.1
G 152—06 Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials 1504.6
G 154—06 Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials 1504.6
G 155—05a Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials 1504.6
AWC American Wood Council 222 Catoctin SE, Suite 201 Leesburg, VA 20175
Standard reference number Title Referenced in code section number
AWC WCD No. 4—2003 Wood Construction Data—Plank and Beam Framing for Residential Buildings 2306.1.2
AWC WFCM—2018 Wood Frame Construction Manual for One- and Two-Family Dwellings 1609.1.1, 1609.1.1.1, 2301.2, 2308.2.4, 2308.6.7.2, 2309.1
ANSI/AWC NDS—2018 National Design Specification (NDS) for Wood Construction with 2018 NDS Supplement 202 (nominal size (lumber)), 722.1, Table 1604.3, Table 1705.5.6, 1711.1.1, 1711.1.4, 1811.5, 1908.1.5, 2304.13, 2306.1, 2306.1.3, Table 2306.2(1), Table 2306.2(2), Table 2306.3(1), Table 2306.3(2), 2307.1
AWC STJR—2015 Span Tables for Joists and Rafters 2306.1.1, 2308.4.2.1, 2308.7.1, 2308.7.2
ANSI/AWC PWF—2015 Permanent Wood Foundation Design Specification 2304.10.5.2
AWC SDPWS—2015 Special Design Provisions for Wind and Seismic 202 (shear wall, shear wall segment, perforated), 2305.1, 2305.2, 2305.3, 2306.1, 2306.2, 2306.3, Table 2306.3(1), Table 2306.3(3)
AWC TR7—2007 Basic Requirements for Permanent Wood Foundation System, Technical Report No. 7 1805.2
AWCI Association of the Wall and Ceiling Industry 513 West Broad Street, Suite 210 Falls Church, VA 22046
Standard reference number Title Referenced in code section number
12-B—04 Technical Manual 12-B Standard Practice for the Testing and Inspection of Field Applied Thin Film Intumescent Fire-resistive Materials; an Annotated Guide, Second Edition 1705.15
AWPA American Wood Protection Association P.O. Box 361784 Birmingham, AL 35236-1784
Standard reference number Title Referenced in code section number
C1—03 All Timber Products-Preservative Treatment by Pressure Processes 1505.6
M4—16 Standard for the Care of Preservative-treated Wood Products 1811.5.2, 2303.1.9
U1—16 USE CATEGORY SYSTEM: User Specification for Treated Wood Table 1507.9.6, 1811.5.2, 2303.1.9, 2304.12.1, 2304.12.2, 2304.12.3, 2304.12.4, 2304.12.5
AWS American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166
Standard reference number Title Referenced in code section number
D1.1—15 Structural Welding Code—Steel Table 1705.2, 1705.2.1.1, 1811.7.1.1, K1
D1.2—03 Structural Welding Code—Aluminum 1705.33.1, 2003.2.2
D1.3—98 Structural Welding Code—Sheet Steel Table 1705.2
D1.4/D1.4M—2017 Structural Welding Code-Reinforcing Steel Including Metal Inserts and Connections In Reinforced Concrete Construction Table 1705.2, 1705.2.1.3, Table 1705.3, 1903.6.2, 2107.3
AWWA American Water Works Association 6666 West Quincy Avenue Denver, CO 80235
Standard reference number Title Referenced in code section number
C 104—08 American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water Q105.1
BHMA Builders Hardware Manufacturers' Association 355 Lexington Avenue, 17th Floor New York, NY 10017-6603
Standard reference number Title Referenced in code section number
A 156.10—2011 Power Operated Pedestrian Doors 1010.1.4.2
A 156.19—2013 Standard for Power Assist and Low Energy Operated Doors 1010.1.4.2
A 156.27—11 Power and Manual Operated Revolving Pedestrian Doors 1010.1.4.1
CEN European Committee for Standardization (CEN) Central Secretariat Rue de Stassart 36 B-10 50 Brussels
Standard reference number Title Referenced in code section number
EN 1081—98 Resilient Floor Coverings—Determination of the Electrical Resistance 406.7.1
BS EN 15250—2007 Slow Heat Release Appliances Fired By Solid Fuel Requirements and Test Methods 2112.2, 2112.5
CGSB Canadian General Standards Board Place du Portage 111, 6B1 11 Laurier Street Gatineau, Quebec, Canada KIA 1G6
Standard reference number Title Referenced in code section number
37-GP-52M (1984) Roofing and Waterproofing Membrane, Sheet Applied, Elastomeric 1504.7, 1507.12.2
37-GP-56M (1980) Membrane, Modified, Bituminous, Prefabricated and Reinforced for Roofing—with December 1985 Amendment 1507.11.2
CAN/CGSB 37.54—95 Polyvinyl Chloride Roofing and Waterproofing Membrane 1507.13.2
CPA Composite Panel Association 19465 Deerfield Avenue, Suite 306 Leesburg, VA 20176
Standard reference number Title Referenced in code section number
ANSI A135.4—2012 Basic Hardboard 2303.1.7
ANSI A135.5—2012 Prefinished Hardboard Paneling 1404.3.1, 2303.1.7, 2304.7
ANSI A135.6—2012 Engineered Wood Siding 1405.3.2, 2303.1.7
A208.1—09 Particleboard 2303.1 8, 2303.1.8.1
CPSC Consumer Product Safety Commission 4330 East West Highway Bethesda, MD 20814-4408
Standard reference number Title Referenced in code section number
16 CFR Part 1201 (2002) Safety Standard for Architectural Glazing Material 2406.2, Table 2406.2(1), 2406.3.1, 2407.1, 2407.1.4.1, 2408.2.1, 2408.3, 2409.2, 2409.3, 2409.4.1
16 CFR Part 1209 (2002) Interim Safety Standard for Cellulose Insulation 720.6
16 CFR Part 1404 (2002) Cellulose Insulation 720.6
16 CFR Part 1500.44 (2009) Method for Determining Extremely Flammable and Flammable Solids 202 (flammable solid)
16 CFR Part 1630 (2007) Standard for the Surface Flammability of Carpets and Rugs 804.4.1
CSA Canadian Standards Association 8501 East Pleasant Valley Cleveland, OH 44131-5516
Standard reference number Title Referenced in code section number
AAMA/WDMA/CSA 101/I.S.2/A440—11 Specifications for Windows, Doors and Unit Skylights 1709.5.1, 2405.5
CSSB Cedar Shake and Shingle Bureau P. O. Box 1178 Sumas, WA 98295-1178
Standard reference number Title Referenced in code section number
CSSB—97 Grading and Packing Rules for Western Red Cedar Shakes and Western Red Shingles of the Cedar Shake and Shingle Bureau Table 1507.8.5, Table 1507.9.6
DASMA Door and Access Systems Manufacturers Association International 1300 Summer Avenue Cleveland, OH 44115-2851
Standard reference number Title Referenced in code section number
ANSI/DASMA 107—1997 (R2012) Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation 2603.4.1.9
108—12 Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference 1709.5.2
115—16 Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Missile Impact and Cyclic Wind Pressure 1609.1.2.3
DOC U.S. Department of Commerce National Institute of Standards and Technology 1401 Constitution Avenue NW Washington, DC 20230
Standard reference number Title Referenced in code section number
PS-1—09 Structural Plywood 2303.1.5, 2304.7, Table 2304.8(4), Table 2304.8(5), Table 2306.2(1), Table 2306.2(2)
PS-2—10 Performance Standard for Wood-based Structural-use Panels 2303.1.5, 2304.7, Table 2304.7(5), Table 2304.8(5), Table 2306.2(1), Table 2306.2(2)
PS 20—05 American Softwood Lumber Standard 202 (grade (lumber)), 2303.1.1
DOJ U.S. Department of Justice 950 Pennsylvania Avenue, NW Civil Rights Division, Disability Rights Section-NYA Washington, DC 20530
Standard reference number Title Referenced in code section number
36 CFR Part 1192 American with Disabilities Act (ADA) Accessibility Guidelines for Transportation Vehicles (ADAAG) Department of Justice, 1991 E109.2.4, E111.4
DOL U.S. Department of Labor Frances Perkins Building 200 Constitution Avenue NW Washington, DC 20210
Standard reference number Title Referenced in code section number
29 CFR Part 1910.1000 (2009) Air Contaminants 202 (ceiling limit)
DOT NYS Department of Transportation Main Office 50 Wolf Road Albany, NY 12232
Standard reference number Title Referenced in code section number
EI 19—001 NYSDOT LRFD Bridge Design Specifications - 2019 1607.7.1
BM—2019 NYSDOT Bridge Manual 1607.7.1
DOTn U.S. Department of Transportation c/o Superintendent of Documents East Building, 2nd floor Washington, DC 20590
Standard reference number Title Referenced in code section number
49 CFR Parts 100—185 (2005) Hazardous Materials Regulations 202
49 CFR Parts 173.137 (2009) Shippers—General Requirements for Shipments and Packaging—Class 8—Assignment of Packing Group 202 (corrosive material)
49 CFR Parts 173—178 (1999) Specification of Transportation of Explosive and Other Dangerous Articles, UN 0335, UN 0336 Shipping Containers 202 (combustible liquid; explosive; fireworks; flammable liquid)
FEMA Federal Emergency Management Agency Federal Center Plaza 500 C Street S.W. Washington, DC 20472
Standard reference number Title Referenced in code section number
FIS 360497 Federal Emergency Management Agency Flood Insurance Study report 202 (500-year flood elevation), G102.2, G402
FIRMs 360497 Federal Emergency Management Agency Flood Insurance Rate Map 202 (500-year flood elevation; base flood elevation; coastal a-zone; coastal high hazard area), G102.2, G102.3, G102.3.1, G102.3.2, G103.3.1, G103.3.2, G402
FORM 086-0-34—12 Floodproofing Certificate; Federal Emergency Management Agency G107.3, G402
FORM 086-0-33—12 Elevation Certificate; Federal Emergency Management Agency G107.3, G402
FM Factory Mutual Global Research Standards Laboratories Department 1301 Atwood Avenue, P.O. Box 7500 Johnston, RI 02919
Standard reference number Title Referenced in code section number
4430 (2012) Approval Standard for Heat and Smoke Vents 910.3.1
4470 (2012) Approval Standard for Single-Ply Polymer-Modified Bitumen Sheet, Built-Up Roof (BUR) And Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction 1504.7
4474 (2011) American National Standard for Evaluating the Simulated Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures 1504.3.1, 1504.3.2
4880 (2010) Approval Standard for Class 1 Fire Rating of Insulated Wall or Wall and Roof/Ceiling Panels, Interior Finish Materials or Coatings and Exterior Wall Systems 2603.4, 2603.9
DS 1-35 (2017) Factory Mutual Data Sheet – Green Roof Systems 1507.16.1
GA Gypsum Association 6525 Belcrest Road, Suite 480 Hyattsville, MD 20782
Standard reference number Title Referenced in code section number
GA 216—13 Application and Finishing of Gypsum Panel Products Table 2508.1, 2509.2
GA 600—12 Fire-Resistance Design Manual, 20th Edition Table 721.1(1), Table 721.1(2), Table 721.1(3)
HPVA Hardwood Plywood Veneer Association 1825 Michael Faraday Drive Reston, VA 20190
Standard reference number Title Referenced in code section number
HP-1—2016 American National Standard for Hardwood and Decorative Plywood 2303.3, 2304.7
HUD U.S. Department of Housing and Urban Development 451 7th Street, SW Washington, DC 20410
Standard reference number Title Referenced in code section number
HUD 24 CFR Part 3280 (2008) Manufactured Home Construction and Safety Standards G201.1.2, G402
ICC International Code Council, Inc. 500 New Jersey Ave, NW 6th Floor Washington, DC 20001
Standard reference number Title Referenced in code section number
ICC A117.1—09 Accessible and Usable Buildings and Facilities 202 (accessible unit, type b unit, type b+nyc unit), 907.2.11.1.1, 1009.8.2, 1009.9, 1009.11, 1010.1.9.7, 1012.1, 1012.6.5, 1012.10, 1013.4, 1023.9.3, 1101.2, 1103.2.2, 1105.1.7, 1106.1, 1106.5, 1106.6, 1106.7, 1106.7.3.1, 1106.7.3.2.1, 1106.8.2, 1106.8.5, 1107.2, 1107.2.1, 1107.2.2, 1107.2.2.1, 1107.2.2.2, 1107.2.2.3, 1107.2.2.5, 1107.2.2.7.3, 1107.2.2.7.5, 1107.2.2.7.6, 1107.2.2.8.1, 1107.2.2.8.1.1, 1107.2.2.8.2, 1107.2.2.8.2.1, 1107.2.2.9, 1107.2.3, 1107.2.3.1, 1107.2.3.2, 1107.2.3.3, 1107.2.3.4, 1107.2.3.5, 1107.2.4, 1107.2.5, 1107.2.6, 1107.2.7, 1107.2.8, 1107.3.1, 1107.4, 1107.6.1.3, 1108.2.2, 1108.2.3, 1108.2.5, 1108.2.7, 1108.2.9.2, 1108.3, 1108.4.1, 1108.4.1.1, 1108.4.1.2, 1108.4.1.4, 1108.4.1.5, 1109.1, 1109.2, 1109.2.2, 1109.2.4, 1109.3, 1109.4, 1109.5.1, 1109.5.2, 1109.5.3, 1109.6, 1109.7, 1109.7.1, 1109.7.1.1, 1109.8, 1109.8.1, 1109.9.3, 1109.9.3.3, 1109.9.3.4, 1109.10.3, 1109.16, 1109.17, 1110.4.10, 1110.4.11, 1110.4.12, 1111.2, 1111.3, 1111.4, 1111.4.2, 3001.2, 3001.3, 3307.2.6, E101.2, E104.2, E104.2.4, E104.3, E104.3.1, E105.1, E105.2.1, E105.2.2, E105.4, E105.5, E105.6, E106.2, E106.3, E106.4, E106.4.9, E106.5, E107.2, E107.3, E109.2.1, E109.2.2.1, E109.2.2.2, E109.2.2.3, E109.2.3, E109.2.5, E109.2.6, E109.2.8, E111.4
ICC 300—12 ICC Standard on Bleachers, Folding and Telescopic Seating and Grandstands 1029.1.1
ICC 400—17 Standard on Design and Construction of Log Structures 2301.2
ICC 500—14 ICC/NSSA Standard on the Design and Construction of Storm Shelters 202 (storm shelter), 423.1, 423.3, 423.4, 1604.5.1, 1604.10
ICC 600—14 Standard for Residential Construction in High-wind Regions 1609.1.1, 1609.1.1.1, 2308.2.4
SBCCI SSTD 11—99 Test Standard for Determining Wind Resistance of Concrete or Clay Roof Tiles 1711.2.1, 1712.2.2, 1504.2.1.1, 1504.2.1.2
IEC International Electrotechnical Commission IEC Central Office 3, rue de Varembe, P.O. Box 131 1211 Geneva 20 Switzerland
Standard reference number Title Referenced in code section number
IEC 60118-4 – 2014-12 Electroacoustics - Hearing aids, Part 4 N102.1
IEC 62489-1 – 2010-01 Electroacoustics - Audio-frequency induction loop systems for assisted hearing, Part 1 N102.1
ISO International Organization for Standardization ISO Central Secretariat 1 ch, de la Voie-Creuse, Case Postale 56 CH-1211 Geneva 20, Switzerland
Standard reference number Title Referenced in code section number
ISO 8115—86 Cotton Bales—Dimensions and Density Table 307.1(1), Table 415.11.1.1.1
ISO 8336—09 Fiber-Cement Flat Sheets - Product Specification and Test Methods 1404.10, 1405.16.1, 1405.16.2, Table 2509.2
ITU International Telecommunication Union (ITU): Place des Nations 1211 Geneva 20 Switzerland
Standard reference number Title Referenced in code section number
ITU-T, Recommendation E.161—2001 Arrangement of digits, letters and symbols on telephones and other devices that can be used for gaining access to a telephone network 1109.7.2.2.4.1
NAAMM National Association of Architectural Metal Manufacturers 800 Roosevelt Road, Bldg. C, Suite 312 Glen Ellyn, IL 60137
Standard reference number Title Referenced in code section number
FP 1001—17 Guide Specifications for Design of Metal Flag Poles 1609.1.1
NCMA National Concrete Masonry Association 13750 Sunrise Valley Herndon, VA 22071-4662
Standard reference number Title Referenced in code section number
TEK 5—84(1996) Details for Concrete Masonry Fire Walls Table 721.1(2)
NFPA National Fire Protection Association 1 Batterymarch Park Quincy, MA 02169-7471
Standard reference number Title Referenced in code section number
2—16 Hydrogen Technologies Code 421.4
13—16* * As modified in Appendix Q Installation of Sprinkler Systems 705.8.2, 712.1.3.1, 901.1.1, 903.3.1.1, 903.3.2, 903.3.5.1, 903.3.8.2, 903.3.8.5, 905.3.3.1, 907.6.3, 1019.3, 1705.29.1, K1, Q101.1, Q102.1, Q105.1
13D—16* * As modified in Appendix Q Standard for the Installation of Sprinkler Systems in One- and Two-family Dwellings and Manufactured Homes 901.1.1, 903.2.11.4, 903.3.1.3 903.3.5.1.1, Q101.1, Q102.1, Q103.1
13R—16* * As modified in Appendix Q Standard for the Installation of Sprinkler Systems in Low Rise Residential Occupancies 901.1.1, 903.2.11.4, 903.3.1.2, 903.3.5.1, 903.3.5.1.1, 903.4 Q101.1, Q104.1, Q105.1
14—16* * As modified in Appendix Q Standard for the Installation of Standpipe and Hose System 403.3.2, 901.1.1, 905.2, 905.3.3.3, 905.4.2, 905.6.2, 905.8, 1705.30, 3202.2.4, 3303.8.1, G304.1.2, G308.9, G308.10, G308.11, G402, Q101.1, Q102.1, Q105.1
20—16* * As modified in Appendix Q Standard for the Installation of Stationary Pumps for Fire Protection 901.1.1, 913.1, 913.2, 913.2.1, 913.5, 1705.30.2, Q101.1, Q105.1, Q106.1
22—13 Standard for Water Tanks for Private Fire Protection Q105.1
25—14 Standard for the Inspection, Testing, and Maintenance of Water-based Fire Protection Systems Q102.1
30—12 Flammable and Combustible Liquids Code 415.6, 507.8.1.1.1, 507.8.1.1.2
31—11 Standard for the Installation of Oil-burning Equipment 2113.15
32—11 Standard for Dry Cleaning Plants 415.9.3
40—11 Standard for the Storage and Handling of Cellulose Nitrate Film 409.1
45—15 Standard on Fire Protection for Laboratories Using Chemicals 427.2, 427.7.1
54—16 National Fuel Gas Code 2113.1
58—14 Liquefied Petroleum Gas Code 415.9.2
61—13 Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Product Facilities 426.1
69—14 Standard on Explosion Prevention Systems 426.1
72—16* * As modified in Appendix Q National Fire Alarm Code 407.4.4.3, 407.4.4.5, 407.4.4.5.1, 411.5, 505.2.3, 901.1.1, 901.6, 903.4.1, 904.3.5, 907.1, 907.2, 907.2.1.1, 907.2.2, 907.2.7, 907.2.8.4, 907.2.11, 907.2.12.1, 907.2.13.3, 907.3, 907.3.3, 907.3.4, 907.5.2.1.2, 907.5.2.2, 907.6, 907.6.1, 907.6.5, 907.7, 907.7.1, 907.7.2, 911.1.5, 911.1.6, 911.2, 915.7, 916.1, 3005.5, 3007.7 Q101.1, Q102.1, Q107.1
80—13 Standard for Fire Doors and Other Opening Protectives 410.3.5, 509.4.2, 713.7, 716.5, 716.5.7, 716.5.8.1, 716.5.9.2, 716.6, 716.6.4, 1010.1.4.3
82—14 Standard on Incinerators and Waste and Linen Handling Systems and Equipment 713.13
85—15 Boiler and Combustion System Hazards Code 426.1
92—18* * As modified in Appendix Q Standard for Smoke Control Systems 901.1.1, 909.7, 909.8, 909.10.1, Q101.1, Q108.1
99—15 Health Care Facilities Code 908.8, 407.10, 425.1
101—15 Life Safety Code 1029.6.2
105—13 Standard for Smoke Door Assemblies and Other Opening Protectives 405.4.2, 710.5.2.2, 716.5.3.1, 909.20.4.1
110—13 Standard for Emergency and Standby Power Systems 1705.36, 2702.1, 2702.4.2
111—13 Standard on Stored Electrical Energy Emergency and Standby Power Systems 1704.31, 1705.36, 2702.1
120—15 Standard for Fire Prevention and Control in Coal Mines 426.1
170—15 Standard for Fire Safety and Emergency Symbols 1025.2.6.2 1025.3.1 1025.6.1
211—13 Standard for Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances 2112.5
221—15 Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls 706.2
252—12 Standard Methods of Fire Tests of Door Assemblies 715.4.2, 715.4.3, 715.4.7.3.1, Table 716.3, 716.3.1, 716.4, 716.5.1, 716.5.2, 716.5.3, 716.5.5.1, 716.5.8.1.1
253—15 Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source 406.8.3, 424.2, 804.2
255—06 Standard Method of Test Surface Burning Characteristics of Building Materials K1
257—12 Standard for Fire Test for Window and Glass Block Assemblies Table 716.3, 716.3.2, 716.4, 716.5.3.2, 716.6, 716.6.1, 716.6.2, 716.6.7.3
259—13 Standard Test Method for Potential Heat of Building Materials 2603.4.1.10, 2603.5.3
265—11 Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile Wall Coverings on Full Height Panels and Walls 803.1.3, 803.1.3.1
268—12 Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source 1406.2.1.1, 1406.2.1.1.1, 1406.2.1.1.2, 2603.5.7
269—12 Standard Test Method for Developing Toxic Potency Data for Use in Fire Hazard Modeling 803.14
276—11 Standard Method of Fire Tests for Determining the Heat Release Rate of Roofing Assemblies With Combustible Above-Deck Roofing Components 1508.1, 2603.3, 2603.4.1.5
285—12 Standard Fire Test Method for the Evaluation of Fire Propagation Characteristics of Exterior Nonload-bearing Wall Assemblies Containing Combustible Components 1401.2, 1403.5, 1403.5.1, 1407.11, 1409.11, 2601.2.1, 2603.5.5
286—15 Standard Methods of Fire Test for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth 402.6.4.4, 803.1.2, 803.1.2.1, 803.11, 2603.7.2, 2603.9, 2604.2.4, 2614.4
288—12 Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Fire-resistance-rated Floor Systems 712.1.13.1
289—13 Standard Method of Fire Test for Individual Fuel Packages 402.6.2, 424.2
409—11 Standard for Aircraft Hangars 412.4.6, Table 412.4.6, 412.4.6.1, 412.6.5
418—11 Standard for Heliports 412.8.4
484—15 Standard for Combustible Metals 426.1
654—13 Standard for the Prevention of Fire & Dust Explosions from the Manufacturing, Processing and Handling of Combustible Particulate Solids 426.1
655—12 Standard for the Prevention of Sulfur Fires and Explosions 426.1
664—12 Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities 426.1
701—10 Standard Method of Fire Tests for Flame-Propagation of Textiles and Films 424.2, 3102.3.1, 3102.6.1.1, 3105.3, 3301.9.1.3, 3301.9.2.3, 3307.2.3, 3307.4.7, 3308.3.4, 3314.8.2, 3315.1.6, 3315.2.3, H114.2, H114.2.2, H117.4
704—12 Standard System for the Identification of the Hazards of Materials for Emergency Response 202 (hazardous production material; laboratory chemical), 415.5.2, 427.4
720—15 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment 915.5.4, 915.6.1, 915.6.2, 915.7
1124—17 Code for the Manufacture, Transportation and Storage of Fireworks and Pyrotechnic Articles 415.6.1.1
PCI Precast Prestressed Concrete Institute 200 West Adams Street, Suite 2100 Chicago, IL 60606-6938
Standard reference number Title Referenced in code section number
MNL 124—11 Design for Fire Resistance of Precast Prestressed Concrete 722.2.3.1
MNL 128—01 Recommended Practice for Glass Fiber Reinforced Concrete Panels 1903.3
PTI Post-Tensioning Institute 38800 Country Club Drive Farmington Hills, MI 48331
Standard reference number Title Referenced in code section number
PTI DC—35.1-14 Recommendations for Prestressed Rock and Soil Anchors 1815.1, 1815.3, 1815.4.5, 1815.5
RCSC Research Council on Structural Connections One East Wacker Drive, Suite 700 Chicago, IL 60601
Standard reference number Title Referenced in code section number
RCSC—14 (2015) Specification for Structural Joints Using High-Strength Bolts Table 1705.2
RMI Rack Manufacturers Institute 8720 Red Oak Boulevard, Suite 201 Charlotte, NC 28217
Standard reference number Title Referenced in code section number
ANSI/MH16.1—12 Specification for Design, Testing and Utilization of Industrial Steel Storage Racks 2209.1
SBCA Structural Building Components Association 6300 Enterprise Lane Madison, WI 53719
Standard reference number Title Referenced in code section number
ANSI/FS 100-12 Standard Requirements for Wind Pressure Resistance of Foam Plastic Insulating Sheathing Used in Exterior Wall Covering Assemblies 2603.10
SDI Steel Deck Institute P. O. Box 426 Glenshaw, PA 15116
Standard reference number Title Referenced in code section number
NC—17 Standard for Noncomposite Steel Floor Deck 2210.1.1.1
RD—17 Standard for Steel Floor Deck 2210.1.1.2
SDI-C—2017 Standard for Composite Steel Floor Deck Slabs 2210.1.1.3
SDI-QA/QC—2017 Standard for Quality Control and Quality Assurance for Installation of Steel Deck 1705.2.1.2
SJI Steel Joist Institute 1173B London Links Drive Forest, VA 24551
Standard reference number Title Referenced in code section number
SJI 100—15 Standard Specification Load Tables and Weight Tables for Steel Joists and Joist Girders K-Series, LH-Series, DHL-Series, Joist Girders - 44th Edition 1604.3.3, 2203.2, 2207.1
SJI 200—15 Standard Specification for Composite Steel Joists - CJ-Series 1604.3.3
SPRI Single-Ply Roofing Institute 411 Waverly Oaks Road, Suite 331B Waltham, MA 02452
Standard reference number Title Referenced in code section number
ANSI/SPRI/FM 4435-ES-1—11 Wind Design Standard for Edge Systems Used with Low Slope Roofing Systems 1504.5
ANSI/SPRI RP-4—13 Wind Design Guide for Ballasted Single-ply Roofing Systems 1504.4
ANSI/SPRI VF1—10 External Fire Design Standard for Vegetative Roofs 1507.16.1
RP-14—16 Wind Design Standards for Vegetative Roofing Systems 1507.16.1
TIA Telecommunications Industry Association 1320 N. Courthouse Road Arlington, VA 22201-3834
Standard reference number Title Referenced in code section number
222-G—05 Structural Standards for Antenna Supporting Structures and Antennas, including—Addendum 1, 222-G-1, Dated 2007, Addendum 2, 222-G-2 Dated 2009, Addendum 3, 222-3 dated 2013 and Addendum 4, 222-G-4 dated 2014 1609.1.1
TIA-222-H—17 Standard for Antennas and the Supporting Structures for Antennas and Small Wind Turbines 1609.1.1, 3108.1, 3108.2, 3108.4
TMS The Masonry Society 105 South Sunset Street, Suite Q Longmont, CO 80501
Standard reference number Title Referenced in code section number
216—2013 Standard Method for Determining Fire Resistance of Concrete and Masonry Construction Assemblies Table 721.1(2), 722.1
302—2012 Standard Method for Determining the Sound Transmission Class for Masonry Walls 1207.2.1
402—2016* * As modified in Chapter 21 Building Code Requirements and Specifications for Masonry Structures 1405.6, 1405.6.2, 1405.10, 1604.3.4, 1705.4.1, Table 1705.4.1, 1705.4.3, Table 1705.4.3 2101.2, 2104.1, 2106.1, 2107.1, 2107.2, 2107.3, 2107.4, 2108.1, 2108.2, 2108.3, 2109.1, 2109.1.1, 2109.1.1.1, 2109.2, 2109.2.1, 2110.1
403—2017 Direct Design Handbook for Masonry Structures 2101.2
404—2016 Standard for the Design of Architectural Cast Stone 2101.2
504—2016 Standard for the Fabrication of Architectural Cast Stone 2103.1
602—2016 Specification for Masonry Structures 1405.6.1, Table 1705.4.1, Table 1705.4.3, 2103.1, 2103.2.1, 2103.3, 2103.4, 2104.1, 2104.2, 2104.3, 2104.5, 2105.1, 2105.2
604—2016 Standard for the Installation of Architectural Cast Stone 2104.1
TPI Truss Plate Institute 218 N. Lee Street, Suite 312 Alexandria, VA 22314
Standard reference number Title Referenced in code section number
TPI 1—2014 National Design Standard for Metal-plate-connected Wood Truss Construction 2303.4.6, 2306.1
UL UL LLC 333 Pfingsten Road Northbrook, IL 60062-2096
Standard reference number Title Referenced in code section number
9—2009 Fire Tests of Window Assemblies Table 716.3, 716.3.2, 716.4, 716.5.3.2, 716.6, 716.6.1, 716.6.2, 716.6.8.1
10A—2009 Tin Clad Fire Doors 716.5
10B—2008 Fire Tests of Door Assemblies—with Revisions through April 2009 Table 716.3, 716.5.2, 716.5.5.1, 716.5.8.1.1.
10C—2009 Positive Pressure Fire Tests of Door Assemblies 716.5.1, 716.5.3, 716.5.5.1, 716.5.8.1.1, 1010.1.10.1
14B—2008 Sliding Hardware for Standard Horizontally mounted Tin Clad Fire Doors—with Revisions Through May 3, 2013 716.5
14C—06 Swinging Hardware for Standard Tin Clad Fire Doors Mounted Singly and in Pairs—with Revisions through May 2013 716.5
55A—04 Materials for Built-Up Roof Coverings 1507.10.2
103—2010 Factory-built Chimneys, for Residential Type and Building Heating Appliances—with Revisions through July 2012 718.2.5.1
127—2011 Factory-built Fireplaces 718.2.5.1, 2111.12
214—01 Standard for Tests for Flame-propagation of Fabrics and Films 3301.9.1.3, 3301.9.2.3, H114.2, H117.4
217—16 Single and Multiple Station Smoke Alarms, 8th Edition 907.2.11, 907.2.11.6, 915.5.3
263—11 Standard for Fire Tests of Building Construction and Materials 703.2, 703.2.1, 703.2.3, 703.2.5, 703.3, 703.4, 703.6, 704.12, 705.7, 705.8.5, 707.6, 712.1.13.2, 714.1, 715.5.1, 716.2, Table 716.3, 716.5.6, 716.5.8.1.1, Table 716.6, 716.6.7.1, 717.3.1, 717.5.2, 717.5.3, 717.6.1, 717.6.2.1, Table 721.1(1), 1407.10, 1409.10, 2103.1, 2603.4, 2603.5.1, 2603.5.2
268—16 Smoke Detectors for Fire Alarm Systems, 7th Edition 407.8, 907.2.11.6, 907.2.11.7, 915.6.3
294—1999 Access Control System Units—with Revisions through September 2010 1010.1.9.6, 1010.1.9.7, 1010.1.9.8, 1010.1.9.9
300—05 (R2010) Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment—with Revisions through July 16, 2010 904.12
300A—06 Outline of Investigation for Extinguishing System Units for Residential Range Top Cooking Surfaces 407.2.6, 904.13
305—2012 Panic Hardware 1010.1.10.3
325—02 Door, Drapery, Gate, Louver and Window Operations and Systems— with Revisions through June 2013 3110.3.1, 3110.4, 406.3.5
555—2006 Fire Dampers—with Revisions through May 2012 717.3.1
555C—2006 Ceiling Dampers—with Revisions through May 2010 717.3.1
555S—99 Smoke Dampers—with Revisions through May 2012 717.3.1
580—2006 Test for Uplift Resistance of Roof Assemblies—with Revisions through July 2009 1504.3.1, 1504.3.2
641—2010 Type L Low-temperature Venting Systems—with Revisions through June 2013 2113.11.1.4
723—2008 Standard for Test for Surface Burning Characteristics of Building Materials—with Revisions through September 2010 202, (flame spread index), 402.6.4.4, 402.6.2, 703.5.2, 720.1, 803.1.1, 803.1.2, 803.1.4, 803.10, 803.11, 806.7, 1404.12.1, 1407.9, 1409.9, 1409.10.1, 1510.10.3, 2303.2, 2603.3, 2603.4.1.13, 2606.3.5.4, 2606.3.5.5, 2603.7, 2603.7.1, 2603.7.2, 2603.7.3, 2604.2.4, 2606.4, 2612.3, 2614.3, 3105.3, K1
790—04 Standard Test Methods for Fire Tests of Roof Coverings—with Revisions through October 2008 1505.1, 2603.6, 2610.2, 2610.3
793—08 Standards for Automatically Operated Roof Vents for Smoke and Heat—with Revisions through September 2011 910.3.1
864—03 Standards for Control Units and Accessories for Fire Alarm Systems—with Revisions through December 2014 406.8.5.1.1, 909.12, 909.12.4.1
924—06 Standard for Safety Emergency Lighting and Power Equipment—with Revisions through February 2011 1013.5
1040—96 Fire Test of Insulated Wall Construction—with Revisions through October 2012 2603.4, 2603.5.2, 2603.9
1256—02 Fire Test of Roof Deck Construction—with Revisions through January 2007 1508.1, 2603.3, 2603.4.1.5
1275—05 Flammable Liquid Storage Cabinets 427.4
1479—03 Fire Tests of Through-penetration Firestops—with Revisions through October 2012 202 (F rating, L rating, T rating, through- penetration firestop system), 714.3.1.2, 714.3.2, 714.4.1.2, 714.4.3
1482—2011 Solid-Fuel-type Room Heaters—with Revisions through August 2015 2112.2
1703—02 Flat-Plate Photovoltaic Modules and Panels 1505.9, 1507.17.6, 1510.11.4
1715—97 Fire Test of Interior Finish Material—with Revisions through January 2013 1407.10, 1409.10, 2603.4, 2603.5.2, 2603.9, 2614.4
1777—2007 Chimney Liners—with Revisions through October 2015 2113.11.1, 2113.19
1784—01 Air Leakage Tests of Door Assemblies—with Revisions through July 2009 710.5.2.2, 710.5.2.2.1, 716.5.3.1, 716.5.7.1, 1016.3.1, 1016.3.2, 3006.1.1, 3007.6, 3007.6.3, 3008.7.3
1897—12 Uplift Tests for Roof Covering Systems 1504.3.1
1975—06 Fire Test of Foamed Plastics Used for Decorative Purposes 402.6.2, 402.6.4.5, 424.2
1994—04 Standard for Luminous Egress Path Marking Systems—with Revisions through November 2010 411.7, 1025.2.1, 1025.2.3, 1025.2.4, 1025.4
2017—2008 Standards for General-purpose Signaling Devices and Systems—with Revisions through May 2011 3109.5.1.8 406.8.5.1.1
2034—08 Standard for Single- and Multiple-Station Carbon Monoxide Alarm—with Revisions through March 2015 915.5.2, 915.5.3
2075—2013 Standard for Gas and Vapor Detectors and Sensors 406.8.5.1.1, 915.6.1, 915.6.3
2079—04 Tests for Fire Resistance of Building Joint Systems—with Revisions through December 2012 202 (fire-resistant joint system, l rating), 715.3, 715.6
2196—2017 Tests for Fire Resistive Cables 909.20.6.1
2200—2012 Stationary Engine Generator Assemblies—with Revisions through June 2013 2702.1.2, 2702.4.1
ULC Underwriters Laboratories of Canada 7 Underwriters Road Toronto, Ontario, Canada M1R3B4
Standard reference number Title Referenced in code section number
CAN/ULC S 102.2—2010 Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings and Miscellaneous Materials and Assemblies—with 2000 Revisions 720.2, 720.3, 720.4
CAN/ULC S635—16 Standard for Lining Systems for Existing Masonry or Factory-built Chimneys and Vents 2113.11.1.2, 2113.19
USC United States Code c/o Superintendent of Documents U.S. Government Printing Office 732 North Capitol Street NW Washington, DC 20401
Standard reference number Title Referenced in code section number
18 USC Part 1, Ch.40 Importation, Manufacture, Distribution and Storage of Explosive Materials 202 (explosive)
WCLIB West Coast Lumber Inspection Bureau P. O. Box 23145 Portland, OR 97281
Standard reference number Title Referenced in code section number
AITC 104—03 Typical Construction Details 2306.1
AITC 110—01 Standard Appearance Grades for Structural Glued Laminated Timber 2306.1
AITC 113—10 Standard for Dimensions of Structural Glued Laminated Timber 2306.1
AITC 117—15 Standard Specifications for Structural Glued Laminated Timber of Softwood Species 2306.1
AITC 119—96 Standard Specifications for Structural Glued Laminated Timber of Hardwood Species 2306.1
AITC 200—09 Manufacturing Quality Control Systems Manual for Structural Glued Laminated Timber 2306.1
WDMA Window and Door Manufacturers Association 2025 M Street, NW Suite 800 Washington, DC 20036-3309
Standard reference number Title Referenced in code section number
AAMA/WDMA/CSA 101/I.S.2/A440—11 Specifications for Windows, Doors and Unit Skylights 1709.5.1, 2405.5
(Am. L.L. 2023/077, 6/11/2023, eff. 6/11/2023)
Editor's note: For related unconsolidated provisions, see Appendix A at L.L. 2008/026, L.L. 2011/021, L.L. 2011/071, L.L. 2011/075, L.L. 2013/112, L.L. 2014/051, and L.L. 2023/077.
