Municipal Code of Chicago § 18-36-010 Reference standards.
18-36-010 Reference standards.
This chapter lists the edition date and full title of standards that are referenced in Chapter 18-28. If a standard is referenced in Chapter 18-28 but not listed in this chapter, the applicable edition shall be determined by reference to Chapter 15 of the International Mechanical Code, 2021 edition. If a more recent edition of a standard listed in this section is listed in Chapter 15 of the International Mechanical Code, 2021 edition, an applicant may elect to use the more recent edition listed in that document instead of the edition listed in this chapter.
ANSI | American National Standards Institute 11 West 42nd Street New York, New York 10036
Standard Reference Number | Title
ICC/ANSI A117.1-98 | Standard on Accessible and Usable Buildings and Facilities
Z 21.69-01 | Connectors for Movable Gas Appliances
Z 21.8-94 | Installation of Domestic Gas Conversion Burners
Z 83.18-01 | Recirculating Direct Gas-Fired Industrial Air Heaters
B 31.9-96 | Building Services Piping
LC 1-01 | Gas Piping Systems Using Corrugated Stainless Steel Tubing (CSST)
A 21.52-91 | Ductile-Iron Pipe, Centrifugal Cast, For Gas
Z 21.15-01 | Manually Operated Gas Valves for Appliances, Appliance Connector Valves and House End Valves
Z 21.21-01 | Automatic Gas Valves for Gas Appliances
ASHRAE | American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. 1791 Tullie Circle, NE Atlanta, GA 30329-2305
Standard Reference Number | Title
STD 34-02 | Designation and Safety Classification of Refrigeration
STD 15-02 | Safety Standard for Refrigeration Systems
ASME | American Society of Mechanical Engineers Three Park Avenue New York, NY 10016-5990
Standard Reference Number | Title
B 31.1-01 | Power Piping
B 31.9-02 | Process Piping
B 16.3-98 | Malleable Iron Threaded Fittings
B 16.11-96 | Forged Fittings, Socket-Welding and Threaded
B 16.24-01 | Cast Copper Alloy Pipe Flanges and Flanges Fittings Class 150, 300, 400, 600, 900, 1500 and 2500
B 16.29-01 | Wrought Copper and Wrought Copper Solder Joint Drainage Fittings - DWV
B 16.50-01 | Wrought Copper and Copper Alloy Braze Joint Pressure Fittings
ASTM | American Society for Testing and Materials 100 Barr Harbor Drive West Conshohocken, PA 19428
Standard Reference Number | Title
F1292-99 | Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment
F-1487-98 | Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
F1951-99 | Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment
D 56-01 | Standard Test Method for Flash Closed Tester
D 93-00 | Standard Test Methods for Flash Pensky-Martens Closed Cup Test
D 3278-97 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup
E 84-01 | Standard Test Method for Surface Characteristics of Building Materials
E 814-00 | Standard Test Methods for Fire Tests Through-Penetration Fire Stops
C 27 | Standard Classification of Fireclay and High-Alumina Refractory Brick
C 411-97 | Standard Test Method for Hot-Surface Performance of High-Temperature Insulation
C 315-02 | Standard Specification for Clay Flue Liners
A 106-99 | Standard Specification for Seamless Carbon Steel Pipe for High-temperature Service
B 42-98 | Specification for Seamless Copper Pipe, Standard Sizes
B 43-98 | Standard Specification for Seam Brass Pipe, Standard Size
B 280-99 | Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B 819-00 | Standard Specification for Seam Tube for Medical Gas Systems
B 88-00 | Standard Specification for Seamless Copper Water Tube
A 254-02 | Standard Specification for Copper-Brazed Steel Tubing
A 106-99 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
B 42-98 | Specification for Seamless Copper Pipe, Standard Sizes
B 43-98 | Standard Specification for Seamless Red Brass Pipe, Standard Size
B 75-99 | Specification for Seamless Copper Tube
B 88-00 | Standard Specification for Seamless Copper Water Tube
B 135-00 | Standard Specification for Seamless Brass Tube
B 302-98 | Specification for Threadless Copper Pipe, Standard Sizes
B 251-97 | Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
D 1527-99 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
D 1785-99 | Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipes Schedules 40, 80 and 120
D 2241-00 | Standard Specification for Poly (Vinyl Chloride) (PVC) Pressure-Rated Pipe (Sdr. Series)
D2282-99 | Standard Specification for Acrylonitrile-butadiene-styrene (Abs) Plastic Pipe (Sdr-pr)
D 3309-96 | Standard Specification for Polybutylene (PB) Plastic - Hot- and Cold-Water Distribution Systems
F 441-95 | Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
F 442-94 | Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (Sdr-pr)
F 876-02 | Standard Specification for Crosslinked Polyethylene (PEX) Tubing
F 877-02 | Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
A 125-01 | Standard Specification for Gray Iron Castings, For Valves, Flanges and Pipe Fittings
D 2466-01 | Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 40
D 2467-01 | Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 80
D 2468-96 | Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
F 438 | Standard Specification for Sock Chlorinated Poly (Vinyl Chloride) Pipe Fittings, Schedule 40
F 439 | Standard Specification for Chlorinated Poly (Vinyl Chloride ) (CPVC) Plastic Pipe Fittings, Schedule 80
B 32-00 | Standard Specification for Solder Metal
D 2235-01 | Standard Specification for Solvent Cement Acrylonitrile-Butadiene-Stryene (ABS) Plastic Pipe and Fittings
F 493-97 | Standard Specification for Solvent Cement for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings
D 2546-96 | Standard Specifications for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
A 254-97 | Standard Specification for Copper Brazed Steel Tubing
A 539-99 | Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Liners
2996 | Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber- Reinforced Thermosetting-Resin) Pipe
D 2513-01 | Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fitting
B 210-00 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless
AWS | American Welding Society 550 N.W. LeJeune Road P.O. Box 351040 Miami, FL 33135
Standard Reference Number | Title
A 5.8-92 | Specification for Filler Metals for Brazing and Braze Welding
CAN/CSA | Canadian Standards Association 178 Rexdale Boulevard Rexdale (Toronto), Ontario, Canada M9W 1R3
Standard Reference Number | Title
CAN/CSA – C22.2 No. 14-05 | Industrial Control Equipment
CSA | Canadian Standards Association 178 Rexdale Blvd Rexdale (Toronto), Ontario, Canada M9W 1R3
Standard Reference Number | Title
B 137.10-98 | Cross-linked Polyethylene/Aluminum/Cross-Linked Polyethylene Composite Pressure Pipe System
MSS | Manufacturers Standardization Society of the Valve & Fittings Industry, Inc. 127 Park Street, N.E. Vienna, VA 22180
Standard Reference Number | Title
SP 69-96 | Pipe Hangers and Supports and Application
NFPA | National Fire Protection Administration 1 Batterymarch Park Quincy, Massachusetts 02169-7471
Standard Reference Number | Title
NFPA 13-99 | Installation of Sprinkler Systems
NFPA 13R-99 | Installation of Sprinkler Systems in Residential Occupancies Up To and Including Four Stories in Height
NFPA 72-99 | National Fire Alarm Code
(Amend Coun. J. 6-8-05, p. 49867, § 2; Amend Coun. J. 7-26-06, p. 81373, § 2; Amend Coun. J. 10-7-09, p. 72419, § 2; Amend Coun. J. 11-8-12, p. 38872, § 384; Amend Coun. J. 3-28-18, p. 74459, Art. II, § 26; Amend Coun. J. 9-14-21, p. 35949, Art. XV, § 11)