§ 14B-24-2406 — Safety glazing

14B-24-2406 Safety glazing.

The provisions of Section 2406 of IBC are adopted by reference with the following modifications: 1. Revise exception 1 to Section 2406.3 to read: "1. For other than tempered glass, manufacturer’s designations are not required where the use of a certificate, affidavit or other evidence confirming compliance with this code is approved by the building official." 2. Revise exception 4 to Section 2406.4.2 to read: "4. Glazing in walls on the latch side of and perpendicular to the plane of the door in a closed position in buildings of Group R-5 occupancy or within dwelling units and sleeping units in other Group R occupancies." 3. Revise exception 1 to Section 2406.4.6 to read: "1. The side of a stairway, landing or ramp that has a guard complying with the provisions of Sections 1015 and 1607.8." 4. Revise the exception to Section 2406.4.7 to read: "Exception: Glazing that is protected by a guard complying with Sections 1015 and 1607.8."