Section PC 1502: Standards
AHRI Air-Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203
Standard reference number Title Referenced in code section number
1010—02 Self-contained, Mechanically Refrigerated Drinking-Water Coolers 410.1
810—16 Addendum 1 Performance Rating of Automatic Commercial Ice-makers 428.1.1
ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036
Standard reference number Title Referenced in code section number
A118.10—99 Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation 417.5.2.5, 417.5.2.6
Z4.3—95 Minimum Requirements for Nonsewered Waste-disposal Systems 311.1
Z21.22—99 (R2003) Relief Valves for Hot Water Supply Systems with Addenda Z21.22a—2000 (R2003) and Z21.22b—2001 (R2003) 504.2, 504.4, 504.4.1
CSA B45.5—11 / IAPMO Z124—11 Plastic Plumbing Fixtures 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1
API American Petroleum Institute 1220 L Street NW Washington, DC 20005-4070
Standard reference number Title Referenced in code section number
12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, effective April 1, 2009 1302.7.2, 1303.10.2
12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 1302.7.2, 1303.10.2
ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191-4400
Standard reference number Title Referenced in code section number
24—14 Flood Resistant Design and Construction 715.1, 1101.9.1
ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016-5990
Standard reference number Title Referenced in code section number
A112.1.2—2004 Air Gaps in Plumbing Systems 406.1, 409.2, Table 608.1, 608.13.1
A112.1.3—2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances 406.1, 409.2, Table 608.1, 608.13.1
A112.3.1—2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7
A112.3.4—2013 / CSA B45.9—2013 Macerating Toilet Systems and Related Components 712.4.1
A112.4.1—2009 Water Heater Relief Valve Drain Tubes 504.6
A112.4.2—2009 Water Closet Personal Hygiene Devices 424.9
A112.4.3—1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System 405.4
A112.4.14—2004 (R2010) Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems Table 605.7
A112.6.1M—1997 (R2008) Floor-affixed Supports for Off-the-floor Plumbing Fixtures for Public Use 405.4.3
A112.6.2—2000 (R2010) Framing-affixed Supports for Off-the-floor Water Closets with Concealed Tanks 405.4.3
A112.6.3—2001 (R2007) Floor and Trench Drains 412.1
A112.6.4—2003 (R2008) Roof, Deck, and Balcony Drains 1102.6
A112.6.7—2010 Enameled and Epoxy-coated Cast-iron and PVC Plastic Sanitary Floor Sinks 427.1
A112.6.9—2005 (R2010) Siphonic Roof Drains 1107.1
A112.14.1—2003 Backwater Valves 715.2
A112.14.3—2000 Grease Interceptors 1003.3.4
A112.14.4—2001 (Reaffirmed 2007) Grease Removal Devices 1003.3.4
A112.18.1—2012 / CSA B125.1—2012 Plumbing Supply Fittings 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2
A112.18.2—2011 / CSA B125.2—2011 Plumbing Waste Fittings 424.1.2
A112.18.3—2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings 424.2, 424.6
A112.18.6 / CSA B125.6—2009 Flexible Water Connectors 605.6
A112.18.9—2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures 404.3
A112.19.1—2013 / CSA B45.2—2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures 407.1, 410.1, 415.1, 416.1, 418.1
A112.19.2—2013 / CSA B45.1—2013 Ceramic Plumbing Fixtures 401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1
A112.19.3— 2008 / CSA B45.4—2008 (R2013) Stainless Steel Plumbing Fixtures 405.9, 407.1, 415.1, 416.1, 418.1, 420.1
A112.19.5—2011 / CSA B45.15—2011 Flush Valves and Spuds for Water-closets, Urinals, and Tanks 425.4
A112.19.7M—2012 / CSA B45.10—2012 Hydromassage Bathtub Systems 421.1, 421.4
A112.19.12—2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems 416.4, 418.3
A112.19.14—2006 (R2011) Six-Liter Water Closets Equipped with a Dual Flushing Device 420.1
A112.19.15—2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors 407.4, 421.6
A112.19.19—2006 Vitreous China Nonwater Urinals 419.1
A112.21.3—1985 (R2007) Hydrants for Utility and Maintenance Use Table 608.1, 608.13.6
A112.36.2M—1991 (R2008) Cleanouts 709.1.10.2
ASSE 1016 / ASME A112.1016 / CSA B125.16—2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings 424.3, 424.4, 607.4
B1.20.1—1983 (R2006) Pipe Threads, General Purpose (inch) 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3
B16.3—2011 Malleable Iron Threaded Fittings Classes 150 and 300 Table 702.4, Table 1102.7
B16.4—2011 Gray Iron Threaded Fittings Classes 125 and 250 Table 605.5, Table 702.4, Table 1102.7
B16.12—2009 Cast-iron Threaded Drainage Fittings Table 702.4, Table 1102.7
B16.15—2011 Cast Bronze Threaded Fittings Table 605.5, Table 702.4
B16.18—2012 Cast Copper Alloy Solder Joint Pressure Fittings Table 605.5, Table 702.4
B16.22—2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings Table 605.5, Table 702.4
B16.23—2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) Table 702.4
B16.26—2011 Cast Copper Alloy Fittings for Flared Copper Tubes Table 605.5, Table 702.4
B16.29—2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) Table 702.4
B31.9—2017 Building Services Piping 605.23.2
BPVC—2010 Boiler and Pressure Vessel Code 312.11.1, 501.2
ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656-1116
Standard reference number Title Referenced in code section number
45—2013 Siphonic Roof Drainage Systems 1107.1
ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145
Standard reference number Title Referenced in code section number
1001—08 Performance Requirements for Atmospheric Type Vacuum Breakers 425.2, Table 608.1, 608.13.6, 608.16.4.1
1002—08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks 425.3.1, Table 608.1
1003—09 Performance Requirements for Water Pressure Reducing Valves 604.8
1004—08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines 409.1
1008—06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units 413.1
1010—04 Performance Requirements for Water Hammer Arresters 604.9
1011—04 Performance Requirements for Hose Connection Vacuum Breakers Table 608.1, 608.13.6
1012—09 Performance Requirements for Backflow Preventers with Intermediate Atmospheric Vent Table 608.1, 608.13.3, 608.16.2
1013—09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers Table 608.1, 608.13.2, 608.16.2
1015—09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies Table 608.1, 608.13.7
ASSE 1016 / ASME A112.1016 / CSA B125.16—2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings 424.3, 424.4, 607.4, 613.1
1017—2010 Performance Requirements for Temperature Actuated Mixing Valves for Hot Water Distribution Systems 501.2.3, 613.1
1018—2010 Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied 1002.4.1.1, 1002.4.1.2
1019—2010 Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type Table 608.1, 608.13.6,
1020—04 Performance Requirements for Pressure Vacuum Breaker Assembly Table 608.1, 608.13.5
1022—03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment Table 608.1, 608.16.1, 608.16.10
1024—04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) Table 608.1, 608.13.10
1035—08 Performance Requirements for Laboratory Faucet Backflow Preventers Table 608.1, 608.13.6
1037—90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures 425.2
1047—2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies Table 608.1, 608.13.2
1048—2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies Table 608.1, 608.13.7
1052—04 Performance Requirements for Hose Connection Backflow Preventers Table 608.1, 608.13.6
1055—2009 Performance Requirements for Chemical Dispensing Systems 608.13.9
1056—2010 Performance Requirements for Spill Resistant Vacuum Breaker Table 608.1, 608.13.5, 608.13.8
1060—2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components 608.14.1
1061—2010 Performance Requirements for Removable and Nonremovable Push Fit Fittings Table 605.5, 605.14.4
1062—2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings 424.7
1066—2009 Performance Requirements for Individual Pressure Balancing In-line Valves for Individual Fixture Fittings 604.11
1069—05 Performance Requirements for Automatic Temperature Control Mixing Valves 424.4
1070—04 Performance Requirements for Water-temperature Limiting Devices 408.3, 416.5, 423.3, 424.5, 607.1.2
1079—2005 Performance Requirements for Dielectric Pipe Unions 605.24.1, 605.24.3
5013—2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) 312.10.2
5015—2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) 312.10.2
5020—2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) 312.10.2
5047—98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) 312.10.2
5048—2009 Performance Requirements for Testing Double Check Valve Detector Assembly (DCDA) 312.10.2
5052—98 Performance Requirements for Testing Hose Connection Backflow Preventers 312.10.2
5056—98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) 312.10.2
ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428-2959
Standard reference number Title Referenced in code section number
A 53/ A 53M—12 Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated Welded and Seamless Table 702.1, Table 702.3, Table 1102.4
A 74—13A Specification for Cast-iron Soil Pipe and Fittings Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7
A 123—12 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products Table 702.3, Table 1102.4
A 153 / A 153M—16a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware Table 702.4, Table 1102.7
A 312 / A 312M—13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6
A 403 / A 403M—11 Specification for Wrought Austenitic Stainless Steel Piping Fittings Table 605.5, Table 605.8
A 518 / A 518M—99 (2012) Standard Specification for Corrosion-Resistant High- Silicon Iron Castings Table 803.3.1
A 778—01 (2009) e1 Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6
A 861—04 (2017) Standard Specification for High-Silicon Iron Pipe and Fittings Table 803.3.2
A 888—13A Specification for Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7
B 32—08 Specification for Solder Metal 605.14.6, 705.6.3, 705.7.3
B 42—10 Specification for Seamless Copper Pipe, Standard Sizes Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6
B 43—09 Specification for Seamless Red Brass Pipe, Standard Sizes Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6
B 62—17 Specification for Composition Bronze or Ounce Metal Castings Table 605.5, Table 702.4, Table 1102.7
B 75—11 Specification for Seamless Copper Tube Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6
B 88—09 Specification for Seamless Copper Water Tube Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6, Figure E103.3(2), Figure E103.3(3)
B 152 / B 152M—13 Specification for Copper Sheet, Strip Plate and Rolled Bar 402.3, 417.5.2.4, 425.3.3, 902.2
B 251—10 Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6
B 302—12 Specification for Threadless Copper Pipe, Standard Sizes Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6
B 447—12a Specification for Welded Copper Tube Table 605.4, Table 605.4.1, Table 1301.6
B 687— (2011) Specification for Brass, Copper and Chromium-plated Pipe Nipples Table 605.8
B 813—10 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube 605.14.6, 705.6.3, 705.7.3
B 828—02 (2010) Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings 605.14.6, 705.6.3, 705.7.3
C 4—04 (2009) Specification for Clay Drain Tile and Perforated Clay Drain Tile Table 702.3, Table 1102.4, Table 1102.5
C 14—11 Specification for Nonreinforced Concrete Sewer, Storm Drain and Culvert Pipe Table 702.3, Table 1102.4
C 76—13a Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe Table 702.3, Table 1102.4
C 425—04 (2009) Specification for Compression Joints for Vitrified Clay Pipe and Fittings Table 702.4, 705.12, 705.16, Table 1102.7
C 443—12 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets 705.5, 705.16
C 564—12 Specification for Rubber Gaskets for Cast-iron Soil Pipe and Fittings 705.4.2, 705.4.3, 705.16
C 654—15 Standard Specification for Porous Concrete Pipe Table 1102.5
C 700—13 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated Table 702.3, Table 702.4, Table 1102.4, Table 1102.5
C 1053—00 (2010) Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications Table 803.3.1, Table 803.3.2
C 1173—10e1 Specification for Flexible Transition Couplings for Underground Piping System 705.2.1, 705.5, 705.11.1, 705.12, 705.13.2, 705.16,
C 1277—12 Specification for Shielded Coupling Joining Hubless Cast-iron Soil Pipe and Fittings 705.4.3
C 1440—08 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems 705.16
C 1460—08 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground 705.16
C 1461—08 Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use 705.16
C 1540—11 Specification for Heavy Duty Shielded Couplings Joining Hubless Cast-iron Soil Pipe and Fittings 705.4.3
C 1563—13 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications 705.4.2
D 1586—11 Standard Test Method for Standard Penetration Test (SPT) and Split-barrel Sampling of Soils 1114.2.1
D 1587—15 Standard Practice for Thin-walled Tube Sampling of Soils for Geotechnical Purposes 1114.2.1
D 2235—04 (2011) Specification for Solvent Cement for Acrylonitrile- Butadiene-Styrene (ABS) Plastic Pipe and Fittings 705.2.2
D 2464—15 Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 Table 1102.7
D 2466—17 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 Table 1102.7
D 2467—15 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 Table 1102.7
D 2564—12 Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems 705.11.2
D 2657—07 Practice for Heat Fusion-joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings 705.13.1, Table 1102.7
D 2661—11 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings Table 702.1, Table 702.4, 705.2.2, Table 1102.7
D 2665—12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.7, Table 1403.2.1
D 2729—11 Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings Table 1102.5, Table 1403.2
D 2751—05 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings Table 702.4, Table 1102.7
D 2846—09be1 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems Table 1301.6
D 2855—96 (2010) Standard Practice for Making Solvent-cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings 705.11.2
D 2949—10 Specification for 3.25-in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings Table 702.1, Table 702.4, Table 1403.2.1
D 3034—08 Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1
D 3212—07 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals 705.2.1, 705.11.1, 705.13.2
D 3311—11 Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns Table 1102.7
D 3350—14 Specification for High Density Polyethylene Pipe (HPDE) Table 1102.4, Table 1102.7
D 4068—09 Specification for Chlorinated Polyethlene (CPE) Sheeting for Concealed Water-containment Membrane 417.5.2.2
D 4551—12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-containment Membrane 417.5.2.1
F 405—05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings Table 1102.5, Table 1403.2, Table 1403.2.1
F 409—12 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings 424.1.2
F 437—15 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 Table 702.3, Table 702.4, Table 1102.4, Table 1102.7
F 438—17 Specification for Socket-type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 Table 702.3, Table 702.4, Table 1102.4, Table 1102.7
F 439—13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 Table 702.3, Table 702.4, Table 1102.4, Table 1102.7
F 477—10 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe 705.16
F 628—08 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core Table 702.1, Table 702.4, 705.2.2, Table 1102.7
F 656—10 Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings 705.11.2
F 891—10 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core Table 702.1 Table 702.2, Table 702.3, Table 1102.4, Table 1102.5
F 1412—09 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7
F 1488—09e1 Specification for Coextruded Composite Pipe Table 702.1, Table 702.2, Table 1403.2
F 1673—10 Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7
F 1866—07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings Table 702.4, Table 1102.7, Table 1403.2.1
F 2306 / F 2306M—13 12'' to 60'' Annular Corrugated Profile-wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications Table 702.4, Table 1102.7
F 2389—10 Specification for Pressure-rated Polypropylene (PP) Piping Systems Table 1301.6, Table 1403.2, Table 1403.2.1
F 2618—15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems Table 803.3.1, Table 803.3.2, 803.3.4.1.2
F 2764—17e1 Standard Specification for 6 to 60 in. Polypropylene (PP) Corrugated Double and Triple Wall Pipe Table 1102.5
F 3219—17 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings Table 1102.5
AWS American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166
Standard reference number Title Referenced in code section number
A5.8M / A5.8—2011 Specifications for Filler Metals for Brazing and Braze Welding 605.11.1, 605.13.1, 605.14.1, 705.3.1, 705.6.1, 705.7.1,
AWWA American Water Works Association 6666 West Quincy Avenue Denver, CO 80235
Standard reference number Title Referenced in code section number
C110 / A21.10—12 Ductile-iron and Gray-iron Fittings Table 605.5, Table 702.4, Table 1102.7
C111 / A21.11—12 Rubber-gasket Joints for Ductile-iron Pressure Pipe and Fittings 605.12
C115 / A21.15—11 Flanged Ductile-iron Pipe with Ductile-iron or Gray-iron Threaded Flanges Table 605.4, Table 605.4.1
C151 / A21.51—02 Standard for Ductile-iron Pipe, Centrifugally Cast for Water Table 605.4, Table 605.4.1, Table 702.1, Table 702.2. Table 702.3, Table 1102.4
C153—00 / A21.53—11 Ductile-iron Compact Fittings for Water Service Table 605.5
C500—09 Standard for Metal-Seated Gate Valves for Water Supply Service Table 605.7
C504—10 Standard for Rubber-Seated Butterfly Valves Table 605.7
C507—11 Standard for Ball Valves, 6 In. Through 60 In Table 605.7
C510—07 Double Check Valve Backflow Prevention Assembly Table 608.1, 608.13.7
C511—07 Reduced-pressure Principle Backflow Prevention Assembly Table 608.1, 608.13.2, 608.16.2
C651—05 Disinfecting Water Mains 610.1
C652—11 Disinfection of Water-storage Facilities 610.1
D100—2005 Standard for Welded Carbon Steel Tanks for Water Storage 1302.7.2, 1303.10.2
D115—2006 Standard for Tendon Prestressed-Concrete Water Tanks 1302.7.2, 1303.10.2
D120—2009 Standard for Thermosetting Fiberglass Reinforced Plastic Tanks 1302.7.2, 1303.10.2
CISPI Cast Iron Soil Pipe Institute 5959 Shallowford Road, Suite 419 Chattanooga, TN 37421
Standard reference number Title Referenced in code section number
301—04a Specification for Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7
310—11 Specification for Coupling for Use in Connection with Hubless Cast-iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications 308.5.1, 308.6.1, 705.4.3
CSA CSA Group 8501 East Pleasant Valley Cleveland, OH 44131-5516
Standard reference number Title Referenced in code section number
A257.1M—2009 Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings Table 702.3, Table 1102.4
A257.2M—2009 Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings Table 702.3, Table 1102.4
A257.3M—2009 Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets 705.5, 705.16
ASME A112.3.4—2013 / CSA B45.9—2013 Macerating Systems and Related Components 712.4.1
ASME A112.18.1—2012 / CSA B125.1—2012 Plumbing Supply Fittings 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2
ASME A112.18.2—2011 / CSA B125.2—2011 Plumbing Waste Fittings 424.1.2
ASME A112.19.1—2013 / CSA B45.2—2013 Enameled Cast-iron and Enameled Steel Plumbing Fixtures 407.1, 410.1, 415.1, 416.1, 418.1
ASME A112.19.2—2013 / CSA B45.1—2013 Ceramic Plumbing Fixtures 401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1
ASME A112.19.3—2008 / CSA B45.4—08 (R2013) Stainless-steel Plumbing Fixtures 405.9, 407.1, 415.1, 416.1, 418.1, 420.1
ASME A112.19.5—2011 / CSA B45.15—2011 Flush Valves and Spuds for Water-closets, Urinals and Tanks 425.4
ASME A112.19.7—2012 / CSA B45.10—2012 Hydromassage Bathtub Systems 421.1, 421.4
ASSE 1016 / ASME A112.1016 / CSA B125.16—2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings 424.3, 424.4, 607.4
CSA B45.5—11 / IAPMO Z124—2011 Plastic Plumbing Fixtures 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1
B64.1.1—11 Vacuum Breakers, Atmospheric Type (AVB) 425.2, Table 608.1, 608.13.6, 608.16.4.1
B64.1.2—11 Pressure Vacuum Breakers, (PVB) Table 608.1, 608.13.5
B64.1.3—11 Spill Resistant Pressure Vacuum Breaks (SRPVB) 608.13.8
B64.2—11 Vacuum Breakers, Hose Connection Type (HCVB) Table 608.1, 608.13.6
B64.2.1—11 Vacuum Breakers, Hose Connection (HCVB) with Manual Draining Feature Table 608.1, 608.13.6
B64.2.1.1—11 Hose Connection Dual Check Vacuum Breakers, (HCDVB) Table 608.1, 608.13.6
B64.2.2—11 Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature Table 608.1, 608.13.6
B64.3—11 Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP) Table 608.1, 608.13.3, 608.16.2
B64.4—11 Backflow Preventers, Reduced Pressure Principle Type (RP) Table 608.1, 608.13.2
B64.4.1—11 Reduced Pressure Principle for Fire Sprinklers (RPF) Table 608.1, 608.13.2
B64.5—11 Double Check Backflow Preventers (DCVA) Table 608.1, 608.13.7
B64.5.1—11 Double Check Valve Backflow Preventer for Fire Systems (DCVAF) Table 608.1 608.13.7
B64.6—11 Dual Check Backflow Preventers Valve (DuC) Table 608.1, 608.13.10
B64.7—11 Laboratory Faucet Vacuum Breakers (LFVB) Table 608.1, 608.13.6
B64.10—11 Manual for the Selection and Installation of Backflow Prevention Devices 312.10.2
B64.10.1—11 Maintenance and Field Testing of Backflow Preventers 312.10.2
B79—08 (R2013) Commercial and Residential Drains, and Cleanouts 412.1
B125.3—2012 Plumbing Fittings 408.3, 423.3, 424.4, 424.5, 425.2, 425.3.1, Table 605.7
B137.2—02 PVC Injection-Moulded Gasketed Fittings for Pressure Applications Table 1102.7
B137.3—13 Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications 705.11.2
B181.1—11 Acrylonitrile-butadiene-styrene ABS Drain, Waste and Vent Pipe and Pipe Fittings Table 702.1, Table 702.4, 705.2.2, 715.2, Table 1102.7
B181.2—11 Polyvinylchloride PVC and chlorinated polyvinylchloride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings Table 702.1 Table 702.2, Table 702.3, 705.11.2, 715.2, Table 1102.4
B181.3—11 Polyolefin and Polyvinylidene Fluoride (PVDF) Laboratory Drainage Systems Table 803.3.1, Table 803.3.2, 803.3.4.4.1, Table 1102.7
B182.1—11 Plastic Drain and Sewer Pipe and Pipe Fittings 705.11.2, Table 1102.5
B182.2—11 PSM Type Polyvinylchloride PVC Sewer Pipe and Fittings Table 702.3, Table 1102.4, Table 1102.5
B182.4—11 Profile Polyvinylchloride PVC Sewer Pipe and Fittings Table 702.3, Table 1102.4, Table 1102.5
B182.6—11 Profile Polyethylene (PE) Sewer Pipe and Fittings for Leak- proof Sewer Applications Table 1102.5
B182.8—11 Profile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings Table 1102.5
B356—10 Water Pressure Reducing Valves for Domestic Water Systems 604.8
B483.1—14 Drinking Water Treatment Units 611.1, 611.2
B602—10 Mechanical Couplings for Drain, Waste and Vent Pipe and Sewer Pipe 705.2.1, 705.4.3, 705.5, 705.11.1, 705.12, 705.13.2, 705.16
IAPMO IAPMO Group 4755 E. Philadelphia Ontario, CA 91761
Standard reference number Title Referenced in code section number
PS 117—08 Copper and Copper Allow Tubing System Incorporating Press-type or Nail-type Connections 605.14.4
CSA B45.5—11 / IAPMO Z124—2011 Plastic Plumbing Fixtures 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1
ICC International Code Council, Inc. 500 New Jersey Ave, NW 6th Floor Washington, DC 20001
Standard reference number Title Referenced in code section number
A117.1—2009 Accessible and Usable Buildings and Facilities 404.2, 410.1
ISEA International Safety Equipment Association 1901 N. Moore Street, Suite 808 Arlington, VA 22209
Standard reference number Title Referenced in code section number
ANSI / ISEA Z358.1—2009 Emergency Eyewash and Shower Equipment 411.1
MSS Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 127 Park St. NE Vienna, VA 22180-4602
Standard reference number Title Referenced in code section number
SP-67—2011 Butterfly Valves Table 605.7
SP-70—2011 Gray Iron Gate Valves, Flanged and Threaded Ends Table 605.7
SP-71—2011 Gray Iron Swing Check Valves, Flanged and Threaded Ends Table 605.7
SP-72—2010 Ball Valves with Flanged or Butt-Welding Ends for General Service Table 605.7
SP-78—2011 Cast Iron Plug Valves, Flanged and Threaded Ends Table 605.7
SP-80—2008 Bronze Gate, Globe, Angle and Check Valves Table 605.7
SP-110—2010 Ball Valves, Threaded, Socket Welded, Solder Joint, Grooved and Flared Ends Table 605.7
NFPA National Fire Protection Association 1 Batterymarch Park Quincy, MA 02169-7471
Standard reference number Title Referenced in code section number
51—13 Design and Installation of Oxygen-fuel Gas Systems for Welding, Cutting and Allied Processes 1201.1, 1203.1
55—13 Compressed Gases and Cryogenic Fluids Code 1201.1, 1203.1
99—15 Health Care Facilities Code 1201.1, 1202.1
NSF NSF International 789 Dixboro Road Ann Arbor, MI 48105
Standard reference number Title Referenced in code section number
3—2010 Commercial Warewashing Equipment 409.1
14—2011 Plastic Piping System Components and Related Materials 303.3, 611.3
18—2012 Manual Food and Beverage Dispensing Equipment 426.1
42—2011 Drinking Water Treatment Units-Aesthetic Effects 611.1, 611.3
44—2012 Residential Cation Exchange Water Softeners 611.1, 611.3
53—2011a Drinking Water Treatment Units—Health Effects 611.1, 611.3
58—2012 Reverse Osmosis Drinking Water Treatment Systems 611.2, 611.3
61—2012 Drinking Water System Components—Health Effects 410.1, 424.1, 605.4, 605.4.1, 605.5, 605.7, 606.5.4.2, 611.3
62—2012 Drinking Water Distillation Systems 611.1
372—2010 Drinking Water Systems Components—Lead Content 605.2
PDI Plumbing and Drainage Institute 800 Turnpike Street, Suite 300 North Andover, MA 01845
Standard reference number Title Referenced in code section number
G101 (2012) Testing and Rating Procedure for Grease Interceptors with Appendix of Sizing and Installation Data 1003.3.4
UL UL LLC 333 Pfingsten Road Northbrook, IL 60062-2096
Standard reference number Title Referenced in code section number
58—1996 Steel Underground Tanks for Flammable and Combustible Liquids—with revisions through July 27, 1998 1302.7.2, 1303.10.2
142—2006 Steel Aboveground Tanks for Flammable and Combustible Liquids—with revisions through February 12, 2010 1302.7.2, 1303.10.2
174—2004 Household Electric Storage Tank Water Heaters—with revisions through September 2012 502.1
430—2009 Waste Disposers—with revisions through March 23, 2011 413.1
732—1995 Oil-fired Storage Tank Water Heaters—with revisions through April 2010 502.1
921—2004 Integral gas fired heating commercial dishwashers 409.1
1316—1994 Glass-Fiber Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols and Alcohol Gasoline Mixtures—with revisions through May 12, 2006 1302.7.2, 1303.10.2
1453—2004 Electric Booster and Commercial Storage Tank Water Heaters—with revisions through July 2011 502.1
1746—2007 External Corrosion Protection Systems for Steel Underground Storage Tanks 1302.7.2, 1303.10.2
1795—2009 Hydromassage Bathtubs including revisions through August 23, 2011 421.1
WaterSense WaterSense U.S. Environmental Protection Agency Office of Wastewater Management (4204M) 1200 Pennsylvania Avenue, N.W. Washington, D.C. 20460
Standard reference number Title Referenced in code section number
v.1.0—October 1, 2007 High-efficiency Lavatory Faucet Specifications 604.4.1
v.1.0—October 8, 2009 WaterSense Specification for Flushing Urinals 604.4.1
v.1.0—December 17, 2015 WaterSense Specification for Flushometer-Valve Water Closets 604.4.1
v.1.1—July 26, 2018 WaterSense Specification for Showerheads 604.4.1
v.1.2—June 2, 2014 WaterSense Specification for Tank-Type Toilets 604.4.1
