Vermont State Plane Coordinate System

V.S.A. tit. 1, ch. 17

in effect

1 V.S.A. § 671 Vermont coordinate systems defined

671. Vermont coordinate systems defined The most recent system of plane coordinates, known as the State Plane Coordinate System, that has been established by the National Geodetic Survey or its successors for defining and stating the horizontal positions or locations of points on the surface of the earth within the State of Vermont shall be known as the Vermont State Plane Coordinate System. The terms “Vermont Coordinate System” and “Vermont Plane Coordinate System” are synonymous with the term “Vermont State Plane Coordinate System.” Previous versions of this system include “Vermont Coordinate System 1927” and “Vermont Coordinate System 1983.” Amended 1987, No. 169 (Adj. Sess.), § 1, eff. May 3, 1988; 2007, No. 164 (Adj. Sess.), § 38; 2023, No. 86 (Adj. Sess.), § 1, eff. Mar. 4, 2024.

1 V.S.A. § 672 Coordinates defined

672. Coordinates defined (a) The plane coordinates of a point on the earth’s surface, to be used for expressing the geographic position or location of the point in the appropriate zone of the Vermont State Plane Coordinate Systems, shall consist of two distances expressed in: (1) meters and decimals of a meter, or international feet and decimals of a foot, when using the Vermont State Plane Coordinate System or its successors; (2) U.S. Survey feet and decimals of a foot when using the Vermont Coordinate System 1927; or (3) meters and decimals of a meter, or U.S. Survey feet and decimals of a foot, when using the Vermont Coordinate System 1983. (b) One of the distances described in subsection (a) of this section, to be known as the “east or x-coordinate,” shall give the distance east of the y-axis; the other distance, to be known as the “north or y-coordinate,” shall give the distance north of the x-axis. The y-axis of any zone shall be parallel with the central meridian of that zone. The x axis of any zone shall be at right angles to the central meridian of that zone. (c) One international foot equals 0.3048 meter exactly. For conversion of meters to international feet, multiply the meters by 3.280839895. (d) The international foot shall be used for all foot distances and coordinates unless the distances or coordinates are tied to one of the legacy systems referenced in this section. (e) The U.S. survey foot, which equals (1200)/(3937) meter, shall be superseded by the international foot specified in subsection (b) of this section, following guidance from the National Institute of Standards and Technology, the National Geodetic Survey, the National Ocean Service, and the National Oceanic and Atmospheric Administration. Amended 1987, No. 169 (Adj. Sess.), § 2, eff. May 3, 1988; 2007, No. 164 (Adj. Sess.), § 39; 2023, No. 86 (Adj. Sess.), § 1, eff. Mar. 4, 2024.

1 V.S.A. § 673 Additional definitions

673. Additional definitions (a) The Vermont State Plane Coordinate System is the most recent system of plane coordinates established by the National Geodetic Survey, based on the National Spatial Reference System, and known as the State Plane Coordinate System, for defining and stating the geographic positions or locations of points within the State of Vermont and shall be known as the Vermont State Plane Coordinate System. (b) For purposes of more precisely defining the Vermont Coordinate System 1927, the following definition by the U.S. Coast and Geodetic Survey (now the National Ocean Service/National Geodetic Survey) is adopted: (c) The Vermont Coordinate System 1927 is a transverse Mercator projection of the Clarke spheroid of 1866, having a central meridian 72 degrees 30 minutes west of Greenwich, on which meridian the scale is set one part in 28,000 too small. The origin of coordinates is at the intersection of the meridian 72 degrees 30 minutes west of Greenwich and the parallel 42 degrees 30 minutes north latitude. This origin is given the coordinates: x = 500,000 feet and y = 0 feet. (d) For purposes of defining the Vermont Coordinate System 1983, the following definition by the National Ocean Service/National Geodetic Survey is adopted. The Vermont Coordinate System 1983 is a transverse Mercator projection of the GRS 80 ellipsoid, having a central meridian 72 degrees 30 minutes west of Greenwich, on which meridian the scale is set one part in 28,000 too small. The origin of coordinates is at the intersection of the meridian 72 degrees 30 minutes west of Greenwich and the parallel 42 degrees 30 minutes north latitude. This origin is given the coordinates: x = 500,000 meters and y = 0 meters. (e) The position of the Vermont Coordinate System 1983 shall be marked on the ground by existing or future survey stations established in conformity with standards adopted by the National Geodetic Survey or its successors for first-order or second-order work, or both, whose geodetic positions have been rigidly adjusted to the North American Datum 1983 (NAD 1983). Amended 1987, No. 169 (Adj. Sess.), § 3, eff. May 3, 1988; 1993, No. 6, § 1; 2023, No. 86 (Adj. Sess.), § 1, eff. Mar. 4, 2024.

1 V.S.A. § 674 Record

674. Record Coordinates based on any Vermont Coordinate System, purporting to define the position of a point on a land boundary, presented to be recorded in any public land records or deed records shall be accompanied by a specific statement as to their basis and a description of the survey method used to determine them on the record plat or description of the survey. Amended 1987, No. 169 (Adj. Sess.), § 4, eff. May 3, 1988; 1993, No. 6, § 2; 2023, No. 86 (Adj. Sess.), § 1, eff. Mar. 4, 2024.

1 V.S.A. § 675 Restriction

675. Restriction The use of the terms “Vermont State Plane Coordinate System,” “Vermont Coordinate System 1927,” or “Vermont Coordinate System 1983” on any map, report of survey, or other document shall be limited to coordinates based on the respective Vermont Coordinate System as defined in this chapter. Amended 1987, No. 169 (Adj. Sess.), § 5, eff. May 3, 1988; 2023, No. 86 (Adj. Sess.), § 1, eff. Mar. 4, 2024.

1 V.S.A. § 676 Description

676. Description For the purposes of describing the location of any survey station or land boundary corner in the State of Vermont, it shall be considered a complete, legal, and satisfactory description of such location to give the position of such survey station or land boundary corner on the system of plane coordinates as defined in this chapter. Amended 1987, No. 169 (Adj. Sess.), § 6, eff. May 3, 1988.

1 V.S.A. § 677 Construction

677. Construction Nothing contained in this chapter shall require any purchaser or mortgagee of real property to rely solely on a description, any part of which depends entirely upon the Vermont Coordinate Systems. Amended 1987, No. 169 (Adj. Sess.), § 7, eff. May 3, 1988.

1 V.S.A. § 678 Severability

678. Severability If any provision of this chapter shall be declared invalid, such invalidity shall not affect any other portion of this chapter that can be given effect without the invalid provision; and to this end, the provisions of this chapter are declared severable. Added 1987, No. 169 (Adj. Sess.), § 8, eff. May 3, 1988.

1 V.S.A. § 679 Transition

679. Transition The Vermont Coordinate System 1927 shall not be used for projects commenced after January 1, 2000, and the Vermont Coordinate System 1983 shall not be used for projects commenced after release of the State Plane Coordinate System 2022 by the National Geodetic Survey. Added 1987, No. 169 (Adj. Sess.), § 9, eff. May 3, 1988; amended 2023, No. 86 (Adj. Sess.), § 1, eff. Mar. 4, 2024.

Source: Vermont General Assembly (legislature.vermont.gov)URL: https://legislature.vermont.gov/statutes/chapter/01/017Fetched: 10/21/2026