General Requirements.
Tupelo Development Code § 12.10.8
in effect12.10.8. - General Requirements.
(1) Title Block - Name of project, labeled: Preliminary Plat; submittal and revision dates; sheet size (36 by 48) maximum with index map and match lines if multiple sheets are required; graphic scale (not smaller than one inch to 200 feet on a standard engineering scale); north point; property identification number; vicinity map clearly establishing the location of the proposed project, with readily recognizable landmarks, stream buffers, flood plain boundaries, property zoning districts and any overlay zones.
(2) Name, address and telephone number of owner, applicant and agent; name, address and telephone number of surveyor, engineer, landscape architect, or other designer, with seal.
(3) In addition, State or Federal regulations may require that additional information be supplied to the Development Services Department as a part of a submittal.
(4) The preliminary plat shall be provided to the Development Services Department in both hard copy and digital form. The plat drawing shall be in a generally accepted engineering file format and shall be georeferenced to the Mississippi East State Plane Coordinate System.
Source: City of Tupelo, Mississippi, Code of Ordinances and Development Code (Municode Library, library.municode.com)URL: https://library.municode.com/ms/tupelo/codes/development_code?nodeId=CH12APPE_12.10SU_12.10.8GEREFetched: 11/1/2026