For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.
Form a Business

APPENDICES A, B, C, D

Codified Ordinances of Cleveland pt. TWO, tit. V, pt. APPENDICES A, B, C, D
in effect

Codified Ordinances of Cleveland tit. V, APPENDIX A - TABLE I

APPENDIX A - TABLE I Sources and Processes to Be Equipped with Air Cleaning Equipment for the Control of Odorous Matter 1. Rendering Cookers 2. Animal Blood Dryers 3. Asphalt Oxidation 4. Asphalt Roofing Manufacture 5. Brake Shoe Debonding 6. Varnish Cookers 7. Paint Drying or Baking Ovens 8. Meat Smokehouse 9. Coffee Roasting 10. Fabric Backing and Fabric Coating Baking Ovens 11. Ovens for Curing of Binders in Mineral and Wool Production 12. Tear Gas Manufacture 13. Source of Hydrogen Sulfide or Mercaptans Excluding the Water or Air Quenching of Slag 14. Manufacture of Rubber or Rubber Products 15. Refining of Crude Oil and Manufacture and Storage of Petroleum Products 16. Decomposition of Waste 17. Sewage and Waste Treatment 18. Printing and Other Graphic Arts Processes 19. Foundry Operations Including Core Ovens 20. Paper and Pulp Processing 21. Textile, Fibers and Associated Processes 22. Soap Detergents and Kindred Products 23. Scrap Processing

Codified Ordinances of Cleveland tit. V, APPENDIX B - TABLE II

APPENDIX B - TABLE II Maximum Allowable Particulate Emissions from Fuel Burning Equipment Total Input/Hr. Millions of Btu. | Maximum Rate of Emissions Pounds of Particulate/Million Btu. Total Input/Hr. Millions of Btu. | Maximum Rate of Emissions Pounds of Particulate/Million Btu. 1 to 10 | 0.4 15 | 0.35 30 | 0.29 50 | 0.24 70 | 0.22 100 | 0.2 500 | 0.12 1,000 and over | 0.1 Interpolation of the data in this table for values between 10 and 1,000 millions of Btu not given shall be accompanied by us of the equation E = 51.27 H - 0.311, where E = maximum allowable particulate emission rate (# - 106 Btu) and H = total heat input in Btu/Hr.

Codified Ordinances of Cleveland tit. V, APPENDIX C - TABLE III

APPENDIX C - TABLE III Allowable Rate of Emission Based on Process Weight Rate Process WeightRate | Rate ofEmission | | Process WeightRate | Rate ofEmission Lb./Hr. | Tons/Hr. | Lb./Hr. | | Lb./Hr. | Tons/Hrs. | Lb./Hr. Process WeightRate | Rate ofEmission | | Process WeightRate | Rate ofEmission Lb./Hr. | Tons/Hr. | Lb./Hr. | | Lb./Hr. | Tons/Hrs. | Lb./Hr. 100 | 0.05 | 0.551 | | 16000 | 8 | 16.5 200 | 0.1 | 0.877 | | 18000 | 9.00 | 17.9 400 | 0.2 | 1.4 | | 20000 | 10 | 19.2 600 | 0.3 | 1.83 | | 30000 | 15 | 25.2 800 | 0.4 | 2.22 | | 40000 | 20 | 30.5 1000 | 0.5 | 2.58 | | 50000 | 25 | 35.4 1500 | 0.75 | 3.38 | | 60000 | 30 | 40 2000 | 1 | 4.1 | | 70000 | 35 | 41.3 2500 | 1.25 | 4.76 | | 80000 | 40 | 42.5 3000 | 1.5 | 5.38 | | 90000 | 45 | 43.6 3500 | 1.75 | 5.96 | | 100000 | 50 | 44.6 4000 | 2 | 6.52 | | 120000 | 60 | 46.3 5000 | 2.5 | 7.58 | | 140000 | 70 | 47.8 6000 | 3 | 8.56 | | 160000 | 80 | 49 7000 | 3.5 | 9.49 | | 200000 | 100 | 51.2 8000 | 4 | 10.4 | | 1000000 | 500 | 69 9000 | 4.5 | 11.2 | | 2000000 | 1000 | 77.6 10000 | 5 | 12 | | 6000000 | 3000 | 92.7 12000 | 6 | 13.6 | | | | Interpolation of the data in this table for process weight rates up to 60,000 lb./hr. shall be accomplished by use of the equation E = 4.10P0,67 and interpolation and extrapolation of the data for process weight rates in excess of 60,000 lb./hr. shall be accomplished by use of the equation: E = 55.0P0,11 - 40, where E = rate of emission in lb./hr. and P = process weight rate in tons/hr.

Codified Ordinances of Cleveland tit. V, APPENDIX D - TABLE IV. EMISSION REDUCTION OBJECTIVES FOR PARTICULATE MATTER

APPENDIX D - TABLE IV. EMISSION REDUCTION OBJECTIVES FOR PARTICULATE MATTER Source of Air Contamination | Air Pollution Alert | Air Pollution Warning | Air Pollution Emergency Source of Air Contamination | Air Pollution Alert | Air Pollution Warning | Air Pollution Emergency 1. Coal or oil-fired electric power generating facilities. | a. Substantial reduction by utilization of fuels having lowest available ash content. | a. Maximum reduction by utilization of fuels having lowest available ash content. | a. Maximum reduction by utilization of fuels having lowest available ash content. | b. Maximum utilization of mid- day (12:00 Noon to 4:00 p.m.) atmospheric turbulence for boiler lancing and soot blowing. | b. Maximum utilization of mid- day (12:00 Noon to 4:00 p.m.) atmospheric turbulence for boiler lancing and soot blowing. | b. Maximum utilization of mid- day (12:00 Noon to 4:00 p.m.) atmospheric turbulence for boiler lancing and soot blowing. | c. Substantial reduction by diverting electric power generation to facilities outside of Alert Area. | c. Maximum reduction by diverting electric power generation to facilities outside of Warning Area. | c. Maximum reduction by diverting electric power generation to facilities outside Emergency Area. 2. Coal or oil-fired process steam generating facilities. | a. Substantial reduction by utilization of fuels having lowest available ash content. | a. Maximum reduction by utilization of fuels having lowest available ash content. | a. Maximum reduction by reducing heat and steam demands to absolute necessities consistent with preventing equipment damage. | b. Maximum utilization of mid- day (12:00 Noon to 4:00 p.m.) atmospheric turbulence for boiler lancing and soot blowing. | b. Maximum utilization of mid- day (12:00 Noon to 4:00 p.m.) atmospheric turbulence for boiler lancing and soot blowing. | b. Maximum utilization of mid- day (12:00 Noon to 4:00 p.m.) atmospheric turbulence for boiler lancing and soot blowing. | c. Reduction of steam load demands consistent with continuing plant operations. | c. Reduction of steam load demands consistent with continuing plant operations. | c. Taking the action called for in the emergency plan. | | d. Making ready for use a plan of action to be taken if an emergency develops. | 3. A. Manufacturing, processing, and mining industries.AND B. Other persons required by the Commissioner to prepare standby plans. | a. Substantial reduction of air contaminants from manufacturing operations by curtailing, postponing, or deferring production and allied operations. | a. Maximum reduction of air contaminants from manufacturing operations by, if necessary, assuming reasonable economic hardship by postponing production and allied operations. | a. Elimination of air contaminants from manufacturing operations by ceasing, curtailing, postponing or deferring production and allied operations to the extent possible without causing injury to persons or damage to equipment. | b. Maximum reduction by deferring trade waste disposal operations which emit particles, gases, vapors or malodorous substances. | b. Maximum reduction by deferring trade waste disposal operations which emit particles, gases, vapors or malodorous substances. | b. Elimination of air contaminants from trade waste disposal processes which emit particles, gases, vapors or malodorous substances. | c. Reduction of heat load demands for processing consistent with continuing plant operations. | c. Reduction of heat load demands for processing consistent with continuing plant operations. | c. Maximum reduction of heat load demands for processing. 4. Refuse disposal operations. | a. Maximum reduction by prevention of open burning. | a. Maximum reduction by prevention of open burning. | a. Maximum reduction by prevention of open burning. | b. Substantial reduction by limiting burning of refuse in incinerators to the hours between 12:00 Noon and 4:00 p.m. | b. Complete elimination of the use of incinerators. | b. Complete elimination of the use of incinerators.

Codified Ordinances of Cleveland tit. V, APPENDIX D - TABLE VIII. EMISSION REDUCTION OBJECTIVES FOR CARBON MONOXIDE

APPENDIX D - TABLE VIII. EMISSION REDUCTION OBJECTIVES FOR CARBON MONOXIDE Source of Air Contamination | Air Pollution Alert | Air Pollution Warning | Air Pollution Emergency 1. A. Manufacturing industries. ANDB. Other persons required by the Commissioner to prepare standby plans. | a. Substantial reduction of air contaminants from manufacturing operations by curtailing, postponing or deferring production and allied operations. | a. Maximum reduction of air contaminants from manufacturing operations by, if necessary, assuming reasonable economic hardship by postponing production and allied operations. | a. Elimination of air contaminants from manufacturing operations by ceasing, curtailing, postponing or deferring production and allied operations to the extent possible without causing injury to persons or damage to equipment. 2. Refuse disposal operations. | a. Maximum reduction by prevention of open burning. | a. Maximum reduction by prevention of open burning. | a. Maximum reduction by prevention of open burning.

Codified Ordinances of Cleveland tit. V, APPENDIX D - TABLE VII. EMISSION REDUCTION OBJECTIVES FOR HYDROCARBONS

APPENDIX D - TABLE VII. EMISSION REDUCTION OBJECTIVES FOR HYDROCARBONS Source of Air Contamination | Air Pollution Alert | Air Pollution Warning | Air Pollution Emergency 1. Petroleum products storage and distribution. | a. Substantial reduction of air contaminants by curtailing, postponing, or deferring transfer operations. | a. Maximum reduction of air contaminants by assuming reasonable economic hardship by postponing transfer operations. | a. Elimination of air contaminants by curtailing, postponing, or deferring transfer operations to the extent possible without causing damage to equipment. 2. Surface coating and preparation. | a. Substantial reduction of air contaminants by curtailing, postponing or deferring transfer operations. | a. Maximum reduction of air contaminants by assuming reasonable economic hardship by postponing transfer operations. | a. Elimination of air contaminants by curtailing, postponing, or deferring transfer operations to the extent possible without causing damage to equipment. 3. A. Manufacturing and processing industries.ANDB. Other persons required by the Commissioner to prepare standby plans. | a. Substantial reduction of air contaminants from manufacturing operations by curtailing, postponing, or deferring production and allied operations. | a. Maximum reduction of air contaminants from manufacturing operations by, if necessary, assuming reasonable economic hardship by postponing production and a allied operations. | a. Elimination of air contaminants from manufacturing operations by ceasing, curtailing, postponing or deferring production and allied operations to the extent possible without causing injury to persons or damage to equipment.

Codified Ordinances of Cleveland tit. V, APPENDIX D - TABLE VI. EMISSION REDUCTION FOR NITROGEN OXIDES

APPENDIX D - TABLE VI. EMISSION REDUCTION FOR NITROGEN OXIDES Source of Air Contamination | Air Pollution Alert | Air Pollution Warning | Air Pollution Emergency Source of Air Contamination | Air Pollution Alert | Air Pollution Warning | Air Pollution Emergency 1. Steam-electric power generating facilities. | a. Substantial reduction by utilization of fuel which results in the formation of less air contaminant. | a. Maximum reduction by utilization of fuels which results in the formation of less air contaminant. | a. Maximum reduction by diverting electric power generation to facilities outside of Emergency Area. | b. Substantial reduction by diverting electric power generation to facilities outside of Alert Area. | b. Maximum reduction by diverting electric power generation facilities outside of Warning Area. | 2. Process steam generating facilities. | a. Substantial reduction by utilization of fuel which results in the formation of less air contaminant. | a. Maximum reduction by utilization of fuel which results in the formation of less air contaminant. | a. Maximum reduction by reducing heat and steam demands to absolute necessities consistent with preventing equipment damage. | b. Reduction of steam load demands consistent with continuing plant operations. | b. Reduction of steam load demands consistent with continuing plant operations. | | | c. Making ready for use a plan of action to be taken if an emergency develops. | 3. A. Manufacturing and processing industries.ANDB. Other persons required by the Commissioner to prepare standby plans. | a. Substantial reduction of air contaminants from manufacturing operations by curtailing, postponing, or deferring production and allied operations. | a. Maximum reduction of air contaminants from manufacturing operations by, if necessary, assuming reasonable economic hardship by postponing production and allied operations. | a. Elimination of air contaminants from manufacturing operations by ceasing, curtailing, postponing or deferring production and allied operations to the extent possible without causing injury to persons or damage to equipment. | b. Maximum reduction by deferring trade waste disposal operations which emit particles, gases, vapors or malodorous substances. | b. Maximum reduction by deferring trade waste disposal operations which emit particles, gases, vapors or malodorous substances. | b. Elimination of air contaminants from trade waste disposal processes which emit particles, gases, vapors or malodorous substances. | c. Reduction of heat load demands for processing consistent with continuing plant operations. | c. Reduction of heat load demands for processing consistent with continuing plant operations. | c. Maximum reduction of heat load demands for processing. 4. Stationary internal combustion engines. | a. Reduction of power demands for pumping consistent with continuing operations. | a. Reduction of power demands for pumping consistent with continuing operations. | a. Maximum reduction by reducing power demands to absolute necessities consistent with personnel safety and preventing equipment damage. | | b. Maximum reduction by utilization of fuels or power source which results in the formation of less air contaminants. | b. Maximum reduction by utilization of fuels or power source which results in the formation of less air contaminants. 5. Refuse disposal operations. | a. Maximum reduction by prevention of open burning. | a. Maximum reduction by prevention of open burning. | a. Maximum reduction by prevention of open burning. | b. Substantial reduction by limiting burning of refuse in incinerators to the hours between 12:00 Noon and 4:00 p.m. | b. Complete elimination of the use of incinerators. | b. Complete elimination of the use of incinerators.

Codified Ordinances of Cleveland tit. V, APPENDIX D - TABLE V. EMISSION REDUCTION OBJECTIVES FOR SULFUR OXIDES

APPENDIX D - TABLE V. EMISSION REDUCTION OBJECTIVES FOR SULFUR OXIDES Source of Air Contamination | Air Pollution Alert | Air Pollution Warning | Air Pollution Emergency Source of Air Contamination | Air Pollution Alert | Air Pollution Warning | Air Pollution Emergency 1. Coal or oil-fired electric power generating facilities. | a. Substantial reduction by utilization of fuels having lowest available sulfur content. | a. Maximum reduction by utilization of fuels having lowest available sulfur content. | a. Maximum reduction by utilization of fuels having lowest available sulfur content. | b. Substantial reduction by diverting electric power generation to facilities outside of Alert Area. | b. Maximum reduction by diverting electric power generation to facilities outside of Warning Area. | b. Maximum reduction by diverting electric power generation to facilities outside of Emergency Area. 2. Coal or oil-fired process steam generating facilities. | a. Substantial reduction by utilization of fuels having lowest available sulfur content. | a. Maximum reduction by utilization of fuels having the lowest available sulfur content. | a. Maximum reduction by reducing heat and steam demands to absolute necessities consistent with preventing equipment damage. | b. Reduction of steam load demands consistent with continuing plant operations. | b. Reduction of steam load demands consistent with continuing plant operations. | b. Taking the action called for in the emergency plan. | | c. Making ready for use a plan of action to be taken if an emergency develops. | 3. A. Manufacturing and processing industries.ANDB. Other person required by the Commissioner to prepare standby plans. | a. Substantial reduction of air contaminants from manufacturing operations by curtailing, postponing, or deferring production and allied operations. | a. Maximum reduction of air contaminants from manufacturing operations by, if necessary, assuming reasonable economic hardship by postponing production and allied operations. | a. Elimination of air contaminants from manufacturing operations by ceasing, curtailing, postponing or deferring production and allied operations to the extent possible without causing injury to persons or damage to equipment. | b. Maximum reduction by deferring trade waste disposal operations which emit particles, gases, vapors or malodorous substances. | b. Maximum reduction by deferring trade waste disposal operations which emit particles, gases, vapors or malodorous substances. | b. Elimination of air contaminants from trade waste disposal processes which emit particles, gases, vapors, or malodorous substances. | c. Reduction of heat load demands for processing consistent with continuing plant operations. | c. Reduction of heat load demands for processing consistent with continuing plant operations. | c. Maximum reduction of heat load demands for processing.
Source: City of Cleveland, Ohio, Codified Ordinances and City Charter (American Legal Publishing, codelibrary.amlegal.com)URL: https://codelibrary.amlegal.com/codes/cleveland/latest/cleveland_oh/0-0-0-11429Fetched: 11/1/2026

Starting a business in Ohio? Ohio LLC guide: costs and requirements