Instructions.
El Paso City Code § 21.50.010
in effect21.50.010 - Instructions.
A. Lots and buildings that have been zoned to a SmartCode Zone are subject to the requirements of this chapter and to the new community or infill regulating plans that were approved by the city council when the SmartCode Zone was established, or as those plans were subsequently adjusted by the CRC (see Section 21.10.050).
B. Owners and developers may have the design plans required under this chapter prepared on their behalf. Such plans require administrative approval by the CRC.
C. Building and site plans shall show the following, in compliance with the standards described in this chapter:
1. Prior to submittal of a plat for approval, the applicant must receive CRC approval of a preliminary building scale plan showing the following:
a. Building disposition.
b. Building configuration.
c. Building function.
d. Parking location standards.
e. Lot lines.
2. Prior to receiving any building permits, and after receiving plat approval, the property owner must receive CRC approval of a final building scale plan showing the following:
a. Landscape standards.
b. Signage standards.
c. Special requirements.
3. If platting is not required by this title, one building scale plan may be submitted that shows all the information listed above for preliminary and final building scale plans.
(Ord. 16945 § 2 (part), 2008) (Ord. No. 17542, § 24, 4-26-2011)
Source: City of El Paso, City Code and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/tx/el_paso/codes/code_of_ordinances?nodeId=TIT21SMCO_CH21.50BUSCPL_21.50.010INFetched: 10/28/2026