For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 49-514 — Plumbing wall and chase dimensions

Omaha Municipal Code (Supp. No. 100, Update 2: codified through Ordinance No. 44760, enacted August 4, 2026) · Omaha Municipal Code § 49-514

Corpus is an independent public-information project, not the official City of Omaha website. Stable reference: corpuslaw.us/code/01a76750-9c7d-4f41-98a8-7878921448ca

Sec. 49-514. - Plumbing wall and chase dimensions.

The minimum walls and pipe chases containing plumbing pipes shall meet the following dimensions (See Figures 49-514(1) and 49-514(2)): Table 49-514(a) Vertical Stacks Pipe Size Inside Dem. (inches) | Single Wall Rough Width (inches) | With Horizontal Water Piping (inches) 1½ and 2 inch | 4 | 4 3 | 6 | 8 4 | 6 | 8 5 | 8 | 10 6 | 10 | 14 8 | 12 | 16 10 | 14 | 18 12 | 16 | 20 15 | 20 | 24 Table 514 (b) Pipe Chase Clearances Type of Fixture | Combination and Support | Minimum Inside Clear Space Inches | Note Water Closet Floor type | Single and back-to-back | 4 | Note 1 Floor type | Battery back-to-back | 8 | Note 1 Wall hung | Residential single carrier | 8 | Note 2 Wall hung | Commercial single carrier | 18 | Note 2 Wall hung | Commercial single carrier back-to-back | 24 | Note 2 Wall hung | Battery single carriers | 18 | Note 2 Wall hung | Battery back-to-back | 24 | Note 2 Lavatory Single | 4 | Note 1 Single back-to-back | 6 | Note 1 Battery | 6 | Note 1 Battery back-to-back | 10 | Note 1 Battery back-to-back w/carriers | 12 | Note 1 Urinal Single | 6 | Note 1 Battery | 6 | Note 1 Sink Single and back-to-back | 4 | Note 1 Battery | 6 | Note 1 Flushing rim/clinical sink | Single | 10 | Note 1 Shower Single | 4 | Note 1 Back-to-back | 8 | Note 1 Drinking fountain Single | 4 | Note 1 The minimum measurement means space between the back sides of the two gyp boards. All measurements 12 or less are dimensional. See Figure 49-514(1). Note 1: The minimum refers to the space between the back sides of the two gyp boards. See Figure 514-1. Note 2: The minimum refers to the clear space between studs. See Figure 514-2. All measurements 12 or less are dimensional. _____

(Ord. No. 40524, § 1, 10-20-15; Ord. No. 42654, § 10, 8-13-21)

Ask a question about Omaha law

Corpus searches the Omaha sections it holds and shows the ones that match, with their citations. Free, no sign-in.