For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 11-43-3 — PERMANENT SIGN ALLOWANCES BY ZONING DISTRICT

Mesa City Code (Supp. No. 22: codified through Ordinance No. 5996, adopted March 9, 2026) · Mesa City Code § 11-43-3

Corpus is an independent public-information project, not the official City of Mesa website. Stable reference: corpuslaw.us/code/046a1184-38db-4526-bc2f-c23719a913c1

11-43-3: - PERMANENT SIGN ALLOWANCES BY ZONING DISTRICT

The following Tables include the sign allowances for attached and detached permanent signs by zoning district. The "Additional Requirements" column lists additional standards that apply. Individual number(s) placed in parentheses [ex: (1)] refer to footnotes appearing immediately below or following the Table. A. Attached and detached permanent sign allowances in AG, RS, RSL, DR-1, T3N, and T4N are provided in Table 11-43-3-A. Table 11-43-3-A: Attached and Detached Sign Allowances Zoning | Max. Number of Permitted Signs | Max. Area Per Sign (1) | Max. Height | Additional Requirements AG | 1 sign per street front, attached or detached | 6 sq. ft. | 10-feet attached 4-feet detached | Non-illuminated RS, RSL, DR-1, T3N, T4N | 1 sign per lot or parcel, attached or detached | 4 sq. ft. | 10-feet attached 4-feet detached | Non-illuminated (1) A lot or parcel allowed to operate a non-residential land use is allowed to increase the maximum area of each permitted sign to thirty-two (32) sq. ft. with a maximum height of eight (8) feet if detached, or below the top of the parapet or eave, if wall mounted (no roof signs). Increased sign allowance under this provision does not apply to Home Occupations as authorized by Section 11-31-33 in the Zoning Ordinance. B. Attached and detached permanent sign allowances for RM, DR-2, DR-3, T4NF, and T5N are provided in Table 11-43-3-B. Table 11-43-3-B: Attached and Detached Sign Allowances per Development Max. Number of Permitted Signs (1) | Sign Area Calculation | Max. Height | Additional Requirements 2 signs per street front, attached or detached | 1 sq. ft. of sign area per 5-lineal feet of street frontage up to a max. of 32 sq. ft. | 8-feet detached | Illumination is allowed if the sign is adjacent to an arterial or collector street. (2) (1) A non-residential use in T4NF is allowed one (1) additional attached sign on a street and one (1) additional attached sign on an alley frontage, not to exceed thirty-two (32) sq. ft. (2) Street classification is based on the Mesa Transportation Plan. C. The following two (2) Tables provide the attached and detached permanent sign allowances for OC. The maximum aggregate sign allowance for all signage (attached and detached) is thirty-two (32) sq. ft. Table 11-43-3-C-1: Attached Sign Allowances per Occupancy Occupancy | Max. Number of Permitted Signs | Sign Area Calculation | Min. Individual Sign Area (2) Single-Occupant Building | 2 attached signs | 1 sq. ft. of sign area per front foot of building occupancy (1) | 24 sq. ft. Multiple-Occupant Building | 1 attached sign per occupancy | 1 sq. ft. of sign area per front foot of building occupancy (1) | 20 sq. ft. (1) The sign area applies only to occupancies with an exterior wall. When there is more than one (1) exterior wall, the longest wall can be used to calculate the maximum sign allowance. (2) Each occupant with an exterior wall is allowed this minimum individual sign area regardless of the front foot of the building occupancy. Table 11-43-3-C-2: Detached Sign Allowances per Development Max. Number of Permitted Signs | Sign Area Calculation | Max. Height 1 detached sign per street | 1 sq. ft. of sign area per 5-lineal feet of street frontage | 8-feet D. The following four (4) Tables provide the attached and detached permanent sign allowances in NC, LC, GC, PS, PEP, LI, GI, and HI. 1. The standard allowances for attached signs per occupancy are provided in Table 11-43-3-D-1. Table 11-43-3-D-1: Standard Attached Sign Allowances Per Occupancy Front Foot of Building Occupancy (1) | Max. Number of Permitted Signs | Max. Aggregate Sign Area Calculation | Max. Area Per Sign 80-feet or Less (2) | 2 signs | 2 sq. ft. of sign area per front foot of building occupancy | 160 sq. ft. 81 to 199-feet | 3 signs | 160 sq. ft. is allowed | 160 sq. ft. 200 to 249-feet | 4 signs | 80% of lineal front foot of occupancy, | 160 sq. ft. 250-feet or More | 5 signs, plus one additional sign for every additional 50-feet of occupancy up to a max. of 7 signs | 80% of lineal front foot of occupancy up to a max. of 500 sq. ft. | 160 sq. ft. (1) If an occupancy(s) has more than one exterior wall, the longest wall is used to calculate the sign allowance. (2) Each occupant is allowed a minimum of twenty-four (24) sq. ft. of sign area regardless of front foot of building occupancy. 2. In lieu of the standard attached sign allowances in Table 11-43-3-D-1, a single occupant pad building under 5,000 sq. ft. of gross floor area may use the attached sign allowance in Table 11-43-3-D-2. Table 11-43-3-D-2: Optional Attached Sign Allowances for Single Occupant Pad Buildings Under 5,000 sq. ft. of Gross Floor Area Max. Number of Permitted Signs | Max. Aggregate Sign Area Calculation (1)(2) | Max. Area Per Sign 4 signs | 2 sq. ft. of sign area per lineal foot of the widest building elevation up to a max. of 160 sq. ft. | 80 sq. ft. (1) Sign shall not exceed more than 50% of the width of the building elevation. (2) A single-occupant pad building is allowed a minimum of 24 sq. ft. of sign area regardless of the widest building elevation. 3. The standard allowances for detached signs per development are provided in Table 11-43-3-D-3. Table 11-43-3-D-3: Standard Detached Sign Allowances per Development Max. Number/Height | Max. Aggregate Sign Area Calculation | Max. Height | Max. Area Per Sign One (1) Sign: 1-foot of sign height per 10 lineal feet of street frontage Multiple Signs: 1-foot of sign height per 20 lineal feet of street frontage | 1 sq. ft. of sign area per lineal foot of street frontage | 12-feet | 80 sq. ft. 4. In lieu of the standard detached sign allowances in Table 11-43-D-3, commercial use developments with a minimum of three (3) separate occupants and more than four-hundred (400) feet of frontage along a single street frontage may use the detached sign allowance in Table 11-43-3-D-4 for one (1) sign within the development. Table 11-43-3-D-4: Optional Detached Sign Allowance for Commercial Use Development with 3 Separate Occupants and more than 400-feet of Frontage Max. Number/Height | Max. Area Per Sign | Reference The 120-sq. ft. max. sign can be up to 14-feet in height and all other detached signs shall not exceed 8-feet in height | One (1) sign at a max. of 120-sq. ft. and all other detached signs shall not exceed 50 sq. ft. | Use Table 11-43-3-D-3 to determine max. allowances for all detached signs in the development E. Attached and detached sign allowances in DB-1, DB-2, and DC (outside of the Downtown Pedestrian Area [DPA]) are provided in Table 11-43-3-E. In addition to the requirements in this Chapter, a sign in this Sub-section has the following additional requirements: 1. Attached signs must use individual letters. An attached cabinet sign is not permitted. 2. Neon signs are permitted provided the neon is complementary and harmonious with the primary color(s), style, and architecture of the building or development. 3. A comprehensive sign plan is required for sign(s) located on the upper story of a building when the building exceeds two (2) stories in height. Table 11-43-3-E: Attached and Detached Sign Allowances per Development Sign Type | Sign Area Calculation | Max. Number of Permitted Signs | Max. Height/Placement Attached | General Allowance 2 sq. ft. of sign area per front foot of building occupancy up to a max. of 120 sq. ft. All occupants allowed a min. of 32 sq. ft. (1, 2) | 1 per street and 1 per alley frontage | Below parapet Additional Allowance Window: 30% of window | — | — Additional Allowance Awning: 1 sq. ft. of sign area per linear foot of awning up to a max. of 50% of awning | 1 per street frontage | A min. of 8-feet above the sidewalk Detached | 1 sq. ft. of sign area per linear foot of street frontage up to a max. of 32 sq. ft. | 1 per street frontage | 5-feet (3) (1) A sign attached to a single tenant building shall not exceed more than fifty percent (50%) of the width of the building elevation upon which the attached sign is placed. A sign attached to a single tenant space of a multi-tenant building, as determined by the issuance of a separate Certificate of Occupancy for the specific tenant space, shall not exceed more than seventy-five percent (75%) of the width of the front of the occupancy upon which the attached sign is placed. (2) An attached sign is allowed on the occupant's building only. (3) The sign copy horizontal-to-vertical ratio cannot exceed two to one (2:1). F. Attached permanent sign allowances in DC (in the DPA), T4MS, T5MSF, T5MS, and T6MS are provided in Table 11-43-3-F. Table 11-43-3-F: Attached Permanent Sign Allowances per Development Sign Type | Max. Number of Permitted Signs | Sign Area Calculation, Street Frontage | Sign Area Calculation, Alley Frontage | Max. Sign Length | Placement Wall Sign (Single-Occupancy) (1, 4, 5, 7) | 1 per street frontage and 1 per alley frontage | 1 sq. ft. of sign area per linear foot of street frontage up to a max of 40 sq. ft. | ½ sq. ft. of sign area per linear foot of alley frontage up to a max of 20 sq. ft. | 50% of building | No higher than 4-feet below top of building or 25-feet from grade, whichever is less Wall Sign (Multi-Occupancy) (1, 4, 5, 7) | 1 per street frontage and 1 per alley frontage | 1 sq. ft. of sign area per linear foot of street frontage up to a max of 30 sq. ft. | ½ sq. ft. of sign area per linear foot of alley frontage up to a max of 15 sq. ft. | 50% of building | No higher than 4-feet below top of building or 25-feet from grade, whichever is less Awning Sign (3, 5) | 1 per street frontage and 1 per alley frontage | 1 sq. ft. of sign area per linear foot of awning | 1 sq. ft. of sign area per linear foot of awning | 50% of awning | — Blade Sign (7) | 1 per street frontage | Max. of 60% of the face of the blade | — | 60% of the depth of the blade | No higher than 1-foot below the top of the blade Hanging Sign (Parallel to Street) (6, 7) | 1 per street frontage and 1 per alley frontage | 10 sq. ft. | 8 sq. ft. | 10-feet | No higher than ceiling of the canopy and no lower than 8-feet from grade Hanging Sign (Perpendicular to Building) (6, 7) | 1 per street frontage and 1 per alley frontage | 6 sq. ft. | 4 sq. ft. | 6-feet | Top no higher than 14-feet and bottom no lower than 8-feet from grade Marquee Sign (7, 10) | 1 per street frontage | Max. of 60% of the face of the marquee | — | 60% of the length of the marquee | Below the top of the marquee Outdoor Display Case | 1 | 4 sq. ft. | — | — | — Projecting Sign (1, 7, 8, 9, 11) | 1 per street frontage and 1 per alley frontage | 1 sq. ft. of sign area per linear foot of street frontage up to a max of 36 sq. ft. | ½ sq. ft. of sign area per linear foot of alley frontage up to a max of 12 sq. ft. | — | Min. of 8-feet above pedestrian sidewalk, 14-feet above vehicular drive Window Sign (2) | 1 | Max. 30% of window | — | — | — (1) Must use individual letters. An attached cabinet sign is not permitted. (2) A window sign is only allowed on the first and second story of the building. (3) An awning sign is only allowed on the ground floor of the building. Two-story architectural entry elements may include an awning sign over the entry. (4) A wall-mounted sign is allowed on the colonnade in lieu of a wall-mounted sign on the building. (5) A comprehensive sign plan is required for a sign(s) located on the upper story of a building when the building exceeds two (2) stories. (6) Cannot be illuminated. (7) A neon sign is permitted provided the neon is complementary and harmonious with the primary color(s), style, and architecture of the building or development. (8) A projecting sign mounted at the corner of the building must be installed at a forty-five-degree (45°) angle. A Projecting sign mounted on a wall parallel to the street must be mounted at a ninety-degree (90°) angle. A projecting sign must maintain a twelve (12) feet minimum separation from any other projecting sign. (9) A projecting sign is permitted in lieu of a wall-mounted sign. A projecting sign cannot be placed on the colonnade. (10) Exposed bulbs are allowed when the bulbs are an integral component of the design of a marquee. (11) A projecting sign shall not extend more than four (4) feet from the face of the building and no more than two (2) feet above the parapet. G. ID District. Attached and detached permanent sign allowances for properties in the ID District are permitted as follows: 1. Signs in the ID-1 District are permitted as provided in the base zoning district, unless specified otherwise in the adopted infill incentive plan, or by an adopted comprehensive sign plan approved in accordance with Section 11-45-3. 2. Signs in the ID-2 District are permitted as provided in the adopted infill incentive plan, or by an adopted comprehensive sign plan approved in accordance with Section 11-45-3. H. PC District. Attached and detached permanent sign allowances for properties in the PC District shall be as specified in the community plan, or by an adopted comprehensive sign plan approved in accordance with Section 11-45-3. I. EO District. Attached and detached permanent sign allowances for properties in the EO District shall be as specified in the specific EO District Development Plan, or by an adopted comprehensive sign plan approved in accordance with Section 11-45-3.

(Ord. No. 5996, § 4, 3-9-26)

Ask a question about Mesa law

Corpus searches the Mesa sections it holds and shows the ones that match, with their citations. Free, no sign-in.