For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 49-1142 — Type I interceptor location

Omaha Municipal Code (Supp. No. 100, Update 2: codified through Ordinance No. 44760, enacted August 4, 2026) · Omaha Municipal Code § 49-1142

Corpus is an independent public-information project, not the official City of Omaha website. Stable reference: corpuslaw.us/code/072dcedf-43be-414e-b024-b56914c5f758

Sec. 49-1142. - Type I interceptor location.

When possible, the Type I interceptor shall be located within the building or structure and easily accessible for service. The chief plumbing inspector may approve an outdoor installation of an interceptor for compelling security, safety or engineering concerns. Upon approval, the following procedures shall be observed: (a) Installed within five feet of the building or structure. Exception: a car wash using a reclaim tank located outside of the building. The Type I interceptor shall be constructed as a part of the reclaim tank as illustrated in Figure 49-2205. (b) A vent shall be taken off the waste pipe within two feet of the interceptor, run inside the building or structure and vented through the roof or connected to other vents. (c) The interceptor vent shall be run inside the building before returning through the wall or be located near the building with a minimum of two six-inch bollards buried three feet deep extending to the height of the vent. (d) If the interceptor is located in an area with traffic, the cover and interceptor shall be designed to withstand the loads. (e) If installed in a grassy area, there shall be a four-inch thick concrete pad that extends three feet around the edge of the opening of the interceptor.

(Ord. No. 40524, § 1, 10-20-15)

Ask a question about Omaha law

Corpus searches the Omaha sections it holds and shows the ones that match, with their citations. Free, no sign-in.