Sizes and types of protected trees.
Round Rock Zoning and Development Code, art. III, § 8-17
in effectSec. 8-17. - Sizes and types of protected trees.
(a) Size. Except as provided below, a tree having a diameter of eight inches or more is a protected tree:
(1) On all developed lots in zoning districts SF-1, SF-2, SF-3, SF-D, MH, TF, and MU-L, and on developed lots smaller than 15,000 square feet in all other zoning districts, only monarch trees are protected trees.
(2) On all undeveloped lots in zoning districts SF-1, SF-2, SF-3, SF-D, MH, TF, and MU-L, and on undeveloped lots smaller than 15,000 square feet in all other zoning districts, trees having a diameter of 20 inches or more are protected trees.
(b) Type. Trees of all species that meet the size requirement in subsection (a) of this section are protected, except for Celtis occidentalis (Hackberry), Melia azedaragh (China-Berry), Sapium sebiferum (Chinese Tallow), Maclura pomifera (Osage-orange), Juniperus ashei (Texas Common Cedar), and Prosopis glandulosa (Honey Mesquite).
(c) Monarch tree. Except as provided in Sec. 8-25, any tree designated as a monarch tree pursuant to Sec. 8-18 is a protected tree that cannot be removed, unless its designation is removed; and the designation of a monarch tree shall not be removed without city council action, as provided for in Sec. 8-18.
(d) Measurement of trees. Tree size is determined by measuring the diameter at 4½ feet above the ground level. Trees that split into multi-trunks below 4½ feet shall use the sum the largest trunk and one-half of the diameter of each additional trunk measured 4½ feet above the natural grade level to determine the diameter.
Source: City of Round Rock, Texas, Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH8ZODEST_ARTIIITRPRPR_S8-17SITYPRTRFetched: 11/16/2026
