Coral Springs Land Development Code § 250441 Required perimeter buffering adjacent to abutting properties.
Sec. 250441. - Required perimeter buffering adjacent to abutting properties.
When other than the front yard of a B zoned plot abuts or is across a water body or local or collector street from any R zoned plot, a buffer shall be provided on the B zoned property. This buffer area shall not apply where the adjacent R zoned plot is used for business related parking. The buffer area shall be used to create a solid opaque screen such as a decorative masonry wall, or earthen berm, or combination thereof with a minimum height of five (5) feet, provided, however, that the solid opaque screen for designated loading areas, docks, and overhead doors shall have a minimum height of eight (8) feet. The requirements for a solid opaque screen of a minimum height of five (5) feet on the B zoned plot shall not be required when:
(1) The abutting R zoned plot has a minimum of five (5) feet high solid opaque screen and there is no roadway or canal separating the B zoned plot and the R zoned plot; or
(2) The abutting R zoned plot has a minimum four (4) foot high solid opaque screen and where there is a roadway or canal separating the R and B zoned plots.
However, no reduction in wall height or location will be permitted when the wall on the B zoned property is required to screen designated loading areas, docks, and overhead doors or is required to satisfy specific requirements in accordance with provisions set forth elsewhere in this chapter.
Additional buffer width will be required on plots where the building height is five (5) stories or higher when other than the street side of the B zoned plot abuts or is across a water body from an R zoned plot. The minimum width of the buffer shall be thirty-five (35) feet where there is a separator and fifty (50) feet where there is no separator between the parcels. If the abutting RM zoned parcel is being used for business related parking, the buffer shall not be required.
The minimum width of the buffer areas shall be as follows:
Whenever | Abuts | Minimum Width of Buffer (in feet) with building less than 5 stories, or street side & building 5 stories or greater | Minimum Width of Buffer (in feet) with Building 5 stories or greater in height, non-street side, with separator | Minimum Width of Buffer (in feet) with Building 5 stories or greater height, non-street side, no separator
B-1 | All R Zoned Plots | 20 | NA | NA
B-2 | RS | 25 | 35 | 50
RC | 20 | 35 | 50
RM | 20 | 35 | 50
RD | 25 | 35 | 50
B-3 | All R Zoned Plots | 30 | 35 | 50
Buffer areas shall be landscaped in accordance with the provisions as set forth elsewhere in this chapter.
(Code 1972, § 20-297; Ord. No. 93-146, § 1, 9-21-93; Ord. No. 2007-115, § 23, 11-20-07)
