Transparency.
Tulsa Revised Ordinances tit. 42, § 90.140
in effectSection 90.140. - Transparency.
A. Transparency regulations govern the percentage of a street-facing building façade that must be covered by transparent elements (e.g., transparent windows and doors). Such transparent elements shall be designed and maintained to provide views into and out of the building, and shall not be permanently obstructed by fixed elements, such as signage, shelving, furniture, etc.
B. Unless otherwise expressly stated, the transparency area of a ground floor facade is measured between three (3) and eight (8) feet above the adjacent curb. Such transparent elements shall not begin higher than three (3) feet above the level of the adjoining curb and shall have a minimum width of two (2) feet.
Figure 90-17: Ground Floor Transparency Measurement
[image omitted; see the official code]
C. The transparency of an upper story facade is measured from top of the finished floor to the top of the finished floor above. When there is no floor above, upper story transparency is measured from the top of the finished floor to the top of the wall plate.
Figure 90-18: Upper Floor Transparency Measurement
[image omitted; see the official code]
D. Glazed elements used to satisfy minimum transparency requirements must be clear and non-reflective and not be painted or tinted (transparent, low-emissivity glass is permitted).
Source: City of Tulsa, Revised Ordinances and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/ok/tulsa/codes/code_of_ordinances?nodeId=COOR_TIT42ZOCO_CH90ME_S90.140TRFetched: 10/28/2026
