For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 11-5-4 — SITE PLANNING AND DESIGN STANDARDS FOR THE RS AND RSL DISTRICTS

Mesa City Code (Supp. No. 22: codified through Ordinance No. 5996, adopted March 9, 2026) · Mesa City Code § 11-5-4

Corpus is an independent public-information project, not the official City of Mesa website. Stable reference: corpuslaw.us/code/0fec52d3-84c8-4ae9-ba16-8547f3e3f8b5

11-5-4: - SITE PLANNING AND DESIGN STANDARDS FOR THE RS AND RSL DISTRICTS

A. Neighborhood Character and Image. Residential subdivisions of five (5) acres or more shall comply with the following requirements: 1. Connectivity. Residential subdivisions shall provide vehicular, pedestrian and bicycle connectivity to adjacent schools, parks, places of work or services, and abutting residential developments. a. All development shall be designed in accordance with the City of Mesa Standard Details and Specifications, Engineering Design Standards Manual, Land Division Regulations, and transportation facilities identified by the City's Transportation Plan. b. The street or roadway pattern shall be designed with regard to topography and existing natural features. c. Streets stubbed or platted to the boundary of previously approved Development Plans shall be incorporated and continued, to provide for logical, orderly, and convenient movement from one neighborhood to the next. d. Sidewalks, trails, and greenbelts shall be utilized to provide pedestrian/bicycle connections between neighboring subdivisions and major activity areas. 2. Entryway Monumentation Feature. Provide at least one (1) entryway monumentation feature at two (2) neighborhood access points where a street intersects an arterial or collector street. Each entryway monumentation feature shall include at least three (3) of the following: a. Monument signage. b. Specialty pavement delineating the primary entryway, such as stamped asphalt, brick, stone, pavers, or colored concrete. Specialty pavement within the public right-of-way shall be approved by the City Transportation Department. c. Enhanced perimeter wall details, such as but not limited to, decorative panels, lighting, architectural tower or arch feature, or a decorative gate. d. Enhanced landscape treatment with a defined landscaped area of at least 200 square feet that includes a minimum of three (3) trees with a minimum 36-inch box size and decorative shrubs, perennials, ornamental grasses, or specimen plants. At least 60% of this landscaped area must contain live plant material. e. Public art elements, such as but not limited to, sculptural features or thematic elements that reflect neighborhood history, culture, or surrounding natural features. f. Landscaped median or entry island. g. Monument or gateway lighting features, such as but not limited to, uplighting, halo lighting, or illuminated columns. h. Neighborhood identity markers, such as but not limited to, branded poles, pylons, or similar vertical elements. i. Decorative landscape wall or seat wall integrated with planting, in lieu of a perimeter wall. j. Water feature. k. Additional entryway monumentation feature approved by the Planning Director. 3. Architectural Variation. Developments shall provide architectural variety through the use of distinct building elevations, exterior materials, roof lines, garage placement, and building placement. Such variation in buildings shall not consist solely of combinations of the same building features. a. For developments containing three (3) to nine (9) lots, there shall be at least two (2) different types of building elevations. b. For projects containing 10 to 39 lots, there shall be at least three (3) different building elevations. c. An additional building elevation shall be provided for each additional 40 lots. d. No two (2) of the same building elevation with the same floor plan shall be located next to each other or across the street from one another. B. Massing and Scale. Buildings shall contain varied massing and architectural elements and techniques shall be utilized to reduce the apparent massing and scale of buildings, provide shading, and define different uses and activities in the house. 1. Façade Articulation. a. Front Façade. The front façade of buildings shall have at least one (1) change in building plane, excluding the garage. b. Two-story Dwellings on Corner Lots. No second-story street-facing wall shall run in a continuous plane of more than 20 feet without a window, or without a projection, offset, or recess of the building wall at least one (1) foot in depth. [image omitted; see the official code] FIGURE 11-5-4.B(1): TWO-STORY DWELLINGS ON CORNER LOT C. Primary Entrances. Primary entrances shall consist of either a covered front porch or portico, awning, recess, or stoop as specified below. 1. Covered Front Porch. A covered front porch with a minimum depth of six (6) feet and a minimum length of eight (8) feet. a. Measuring Front Porch Depth. i. The required porch depth shall be measured from the building façade to outside of the support post; ii. The total clear furniture area shall be a minimum of four (4) feet by six (6) feet. [image omitted; see the official code] FIGURE 11-5-4.C(1): COVERED FRONT PORCH MEASUREMENTS 2. Portico, Awning, Recess, or Stoop. A portico, awning, recess, or stoop measuring at least four (4) by four (4) feet which is well defined by a gabled entry, distinct change in roof line or columns, or has some other significant architectural distinction. D. Garage Frontage and Location. To prevent residential streetscapes from being dominated by protruding garage doors, and to allow the active, visually interesting features of a house to be dominant, the following standards shall apply: 1. Front Loaded Garages. Where a garage door is parallel to the front property line of the lot, the following shall apply: a. Lots Greater Than or Equal to 50 Feet Wide. i. The aggregate width of garage doors shall not exceed 50% of the aggregate width of the front building elevation; ii. The garage shall be located at least three (3) feet behind the primary wall facing the street; and iii. A covered front porch, patio, or porte-cochere whose aggregate width is 20% of the aggregate width of the front building elevation may be considered the primary wall facing the street. [image omitted; see the official code] FIGURE 11-5-4.D(1): GARAGE FRONTAGE AND LOCATION b. Lots Less Than 50 Feet Wide. i. The aggregate width of garage doors shall not exceed 60% of the aggregate width of the front building elevation; and ii. The garage shall be located at least three (3) feet behind the primary wall or covered front porch (at least eight (8) feet wide and six (6) feet deep) facing the street. 2. Side Loaded Garages. Where garages are oriented with side entry doors, the street-facing façade shall incorporate windows and architectural detailing to maintain the appearance of habitable living space. 3. Garages With Three (3) or More Doors. Garages with three (3) or more doors, or designed to accommodate three (3) or more non-tandem parked cars, are permitted only on lots 75 feet wide or greater, and at least one (1) garage front must be separated from the remaining garage fronts by at least two (2) feet. This requirement does not apply to the following: a. Side or rear loaded garages in which the garage doors are oriented parallel to or within 10 degrees of parallel to the front property line, or oriented perpendicular to an alley located adjacent to the rear property line. b. Garages set a distance of 1.5 times the minimum front setback for garages and carports, based on the requirement for each zoning district, from the front property line, as specified by Table 11-5-3A.1 and Table 11-5-3.A.2. E. Driveways—Maximum Number and Width. 1. Lots Less Than 75 feet Wide. a. A maximum of one (1) driveway up to 20 feet wide is permitted. b. One (1) additional driveway up to 10 feet wide is permitted, if it leads to an interior side setback that is at least 12 feet in width. 2. Lots Greater Than or Equal to 75 Feet Wide. a. A maximum of one (1) driveway up to 30 feet wide is permitted; or b. One (1), 20-foot driveway and one (1) additional 10-foot driveway if it leads to an interior side setback that is at least 12 feet in width. [image omitted; see the official code] FIGURE 11-5-4.E(1): DRIVEWAYS F. Windows. 1. On front facades, windows shall either: a. Contain window trim on at least two (2) sides that is at least two (2) inches in depth; or b. Be recessed at least four (4) inches from the outside plane of the surrounding exterior wall. 2. On buildings that are two (2) stories or greater in height, all façades facing a street, alley, open space, or park shall provide windows on the upper-stories that constitute at least 10% of the façades area. G. Materials. Buildings and structures shall be constructed of durable, high-quality materials appropriate for the Arizona climate. 1. Primary Exterior Building Materials. Primary exterior building materials are brick, stone, integrally tinted and textured masonry block, precast concrete, siding, natural and synthetic wood, natural and synthetic stone, stucco and synthetic stucco, or other material approved by the Planning Director. 2. Minimum Use of Primary Materials. a. Publicly Visible Façades. Building façades facing a street, alley, open space, or park shall contain at least two (2) kinds of primary exterior building materials. b. The use of any one (1) material shall not exceed 85% of each façade. c. Primary Material Calculation. Primary building material coverage shall be calculated by measuring the area of each façade, excluding fenestration, pedestrian and vehicular openings, and other elements that are not part of the vertical façade plane. The percentage of each primary building material shall be calculated by dividing the area covered by that material by the resulting façade area. 3. Architectural Metals. Architectural metals, such as bronze, brass, copper, aluminum, metal-composite material (MCM), and steel shall not cover more than 15% of a building façade. 4. Change in Materials. a. Where material changes are horizontal (i.e., different materials side by side) the transition between materials shall occur at a change in wall plane, preferably at inside corners or where architectural elements intersect (e.g., pilasters, bays, projections), and shall not occur mid-field on a flat wall surface, except where brick or stone veneer is used as wainscoting, it shall be wrapped a minimum of two (2) feet around side walls. b. Where material changes are vertical (i.e., different materials stacked one above another), the transition between materials shall include a belt course, trim band, sill, cap, frame, or similar element to separate the two (2) materials. H. Factory-Built Buildings. Factory-built buildings designed, manufactured and approved for residential purposes as dwelling units and attached to permanent foundations are permitted in all Residential Districts, if such buildings are installed in conformance with all applicable provisions of the Mesa City Code including applicable development standards.

(Ord. No. 5996, § 1, 3-9-26)

Ask a question about Mesa law

Corpus searches the Mesa sections it holds and shows the ones that match, with their citations. Free, no sign-in.