Technical requirements.
Denton City Code § 33-12
in effectSec. 33-12. - Technical requirements.
33.12.1. Manner of measurement. The measurements required for signs by this chapter shall be made using the following procedures:
(a) Setback. To apply the setback provisions of this chapter for signs at any one point, the following measuring procedure shall be used:
(1) Draw an imaginary vertical line extending upward from the curbline of the premises;
(2) Beginning at any point on the vertical line, draw an imaginary horizontal line perpendicular to the vertical line and curbline extending toward the premises;
(3) Beginning at the point where the vertical line intersects the horizontal line, measure along the horizontal line for the required setback.
(b) Height. The maximum height of a ground sign shall be determined by the method of measurement that allows the greater height, as follows:
(1) Curbline measurement. Measure along a vertical line extended upward from the nearest curbline of the public street fronting the premises where the sign is to be located, to the maximum height allowed for the sign. From that point, extend a horizontal line to where the sign is to be located. The horizontal line is the maximum height allowed at that location.
(2) IH-35 measurement. Along IH-35, the height may be measured from the principal lanes, the frontage road, or the ground, whichever allows the greater height.
(3) Natural ground level measurement. At the highest point of the sign, draw a horizontal line to the outer extremities of the sign. At the center of the horizontal line, draw a vertical line to the natural ground level below. (The "natural ground level" shall include any changes in topography necessary for development of the property). The vertical line may not exceed height allowed for the sign at that location.
(c) Effective area means the area enclosed by the smallest imaginary regular shape (e.g., parallelogram, triangle, circle, trapezoid) or combination of regular shapes that will encompass the extreme limits of the writing, representation, emblem, or other display, together with any material or color forming as integral part of the display or used to differentiate the sign from the backdrop or structure against which it is placed. Effective area includes such features as decorative or ornamental elements or features, borders, trims, but not including any supporting structure which is used solely for support of the sign, such as poles, columns and cable, or decorative fence, screening device or wall.
(1) Sign copy mounted or painted on a background panel or area distinctively painted, textured or constructed as a background for the sign copy, shall be measured as the area contained within the outside dimensions of the background panel or surface.
[image omitted; see the official code]
(2) Sign copy mounted as individual letters and/or graphics against a wall, fence, screening device, awning or fascia of a building or other structure that has not been painted, textured or otherwise altered to provide a distinctive background of the sign copy, shall be measured as the area enclosed by the smallest regular shape or combination of shapes that will enclose all sign copy.
[image omitted; see the official code]
(3) Where there are a number of sign faces or more than one sign on a supporting structure.
One (1)—Area of the single face only.
Two (2)—If the interior angle between the two (2) faces is forty-five (45) degrees or less, the area will be the area of one (1) face only; if the angle between the two (2) sign faces is greater than forty-five (45) degrees, the sign area will be the sum of the areas of the two (2) faces.
[image omitted; see the official code]
Three (3) or more sides—The sign area will be the sum of the areas of each of the faces.
(4) All signs on a single supporting structure shall be measured together as though they were one (1) sign to determine the total effective area, except that signs separated by more than thirty-six (36) inches of air space at every point between the signs shall be measured separately and added together to determine the total effective area.
(5) Spherical, free-form, sculptural, other non-planar signs—The area enclosed by the smallest imaginary regular shape or combination of shapes which would fully contain all portions of the sign when rotated horizontally around the sign.
[image omitted; see the official code]
33.12.2. Abandoned signs and supporting structures. The owner of any premise on which there is displayed or maintained an abandoned sign or abandoned supporting structure shall comply with the following requirements:
(a) If it is an abandoned portable sign, remove or cease displaying the sign within thirty (30) days of the date it becomes abandoned.
(b) If it is a ground sign that does not meet the size, height, setback and other requirements of this chapter and is abandoned on or before March 17, 1993, the owner shall cease displaying the abandoned sign, remove the sign, modify or relocate the sign, or put a blank face or other bona fide message on the sign by June 17, 1993 as is necessary to comply with the requirements of this chapter.
(c) If the ground sign does not meet the requirements of this chapter and is abandoned after March 17, 1993, the owner shall cease displaying the sign, remove the sign, modify or relocate the sign, or put a blank face or other bona fide message on the sign within ninety (90) days of the date it becomes abandoned, as necessary to comply with the requirements of this chapter.
(d) If a supporting structure used or designed to be used with a ground sign is abandoned on or before March 17, 1993, and the abandoned supporting structure does not comply with the size, height, and setback, or other requirements applicable to ground signs, the owner of the premises shall cease displaying the supporting structure, or remove, modify or relocate the structure, or put a blank face on a sign with a bona fide message on the supporting structure by June 17, 1993 as necessary to comply with this chapter. If a supporting structure that does not meet the requirements applicable to ground signs is abandoned after March 17, 1993, the owner shall cease displaying the supporting structure or abandoned supporting structure; 1) remove 2) modify 3) relocate the structure and put a blank face or bona fide sign on the supporting structure within ninety (90) days of the date the supporting structure becomes abandoned as necessary to comply with those requirements. In determining whether the supporting structure complies with the size requirements applicable to ground signs, the effective area of the can frame, or similar part of the supporting structure that holds or to which the sign is attached shall be measured in the manner applicable to signs, except that all air spaces shall be counted.
(e) If an abandoned supporting structure does not have a can, frame, or similar part of the supporting structure that would hold the sign or to which the sign would be attached, and such a part or face or sign is placed on the supporting structure, the effective area of the sign or blank face placed on the supporting structure shall not exceed the requirements of this chapter.
(f) No abandoned sign or supporting structure which is altered under the provisions of this section shall be made more nonconforming.
(g) Altering, putting a blank face, or putting a sign on an abandoned supporting structure which is abandoned after March 17, 1993, and which would be nonconforming, and the cost of which exceeds sixty (60) percent of the reproduction cost of the existing abandoned sign or supporting structure shall not be permitted unless in accordance with section 33.10.5(a).
(h) Any abandoned sign or abandoned supporting structure displayed or maintained, or not removed, modified, or relocated in accordance with this chapter by the owner shall constitute a violation of this ordinance, and be considered an unlawful sign and may be removed by the city in accordance with the provisions applicable to the removal of unlawful signs or the owner may be prosecuted as provided under city ordinances or be enjoined from continuing such violation.
(i) As used in this section, abandoned supporting structure means the poles, beams, cables, or other materials that are used or once were used to support an abandoned sign or signs.
(j) If a ground or attached sign that conforms to the regulations of this chapter is abandoned, the owner shall cease displaying the sign and supporting structure or remove same so as not to be visible from any public right-of-way, or paint out or cover the message portion of the sign, or put a blank face on the sign in accordance with this chapter, or place a bona fide message on the message portion so as to leave the message portion and supporting structure neat and unobtrusive in appearance, within ninety (90) days of the date it becomes abandoned.
33.12.3. Sign face standards.
(a) Standards. The following shall be required for the use, display, maintenance, or permitting of an alteration of any abandoned sign or supporting structure regardless of when the sign was abandoned:
(1) Like material. Only the same or like quality material as that being replaced or that was last installed and used as a face on or in the abandoned sign or supporting structure may be allowed as the sign face, or that part of the structure that carries the sign message or that is blanked. The face of the supporting structure must be one which the supporting structure is designed to support. Painting over a face is allowed to blank the sign face. Examples: Plastic face replaces plastic face, metal replaces metal, wood replaces wood face, etc.
(2) Sign copy to be unseen on blank faces. Routed, embossed, or raised messages or sign copy must not be able to be seen, if the face or message is blanked.
(3) Color of blank faces. Blank faces must be of one (1) color.
(4) Covered messages.
a. Painting. Abandoned signs may be painted in order to "blank" the face. However, the paint must completely cover the sign face or message portion of the structure. The covered, painted over message must not show through the paint.
b. Abandoned sign. Covered sign faces must be of a material or substance which renders the resulting sign face completely blank, opaque, and resistant to deterioration. Bleeding or showing through of a covered message or blanked face shall constitute the displaying or maintenance of an abandoned sign in violation of this chapter.
(5) Unlawful to cover sign. No person shall cover signs with bags or tarps of any material.
(6) Issuance of permit. No permit shall be issued for which a dilapidated or deteriorated condition, unless the permit specifically requires repair and conformance with this chapter.
(b) Permit required. Prior to any alteration or restoration of an abandoned sign or supporting structure, a permit for such shall be required in accordance with the provisions of this chapter.
33.12.4. Sign maintenance. It shall be unlawful for any person to display, erect, locate, relocate, or keep any dilapidated or deteriorated sign, or for which a permit is required but has not been obtained.
33.12.5. Wind loads. All ground, projecting, and roof signs shall be designed and installed to withstand a wind pressure of not less than twenty (20) pounds per square foot of area and shall be constructed to receive dead loads as required by the Building Code.
33.12.6. Use of right-of-way. No person shall cross or park a vehicle on a state or city right-of-way for the purpose of maintaining a sign adjacent to the right-of-way.
33.12.7. Inflatable devices. The following regulations shall apply to any balloon or other type of inflatable wind device used as a sign:
(a) It shall be securely anchored at all times.
(b) It shall not extend to a height greater than thirty (30) feet above ground level unless it is attached to the roof of a building, in which case it shall not extend more than ten (10) feet above the highest part of the roof.
(c) It shall not be allowed to extend over any public street or right-of-way or over any other property not under the control of the permittee.
33.12.8. Clearance from electrical lines. All signs shall comply with the provisions of the latest edition of the National Electric Safety Code.
(Ord. No. 2014-406, § 5, 12-1-14)
Source: City of Denton, Texas, Code of Ordinances, Charter and Development Code (Municode Library, library.municode.com)URL: https://library.municode.com/tx/denton/codes/code_of_ordinances?nodeId=SPBLADECO_CH33SIADDE_S33-12TEREFetched: 11/8/2026
