§ 18.02.306 — MD-PD: Downtown - Powning District
Reno Administrative Code, City of Reno, Nevada (Supp. No. 65, Update 1: codified through Ordinance No. 6740, adopted May 6, 2026) · Reno Annexation and Land Development Code § 18.02.306
Corpus is an independent public-information project, not the official City of Reno website. Stable reference: corpuslaw.us/code/14bf7c0d-7b14-446f-adb1-1f7dd0a6521f
18.02.306 - MD-PD: Downtown - Powning District
(a) Purpose The MD-PD district is intended to protect the historic character of this neighborhood within the downtown regional center. Primary uses include single-family homes, multi-family homes, offices, and retail uses. [image omitted; see the official code] Table 2-19 MD - PD: Lot and Building Standards General Standards A | Lot width, minimum | 50 ft Lot size, minimum | 4,750 sf FAR, minimum | — FAR, maximum | 1.5 [1] [2] Density, minimum | — Density, maximum | 21 du/acre [1] [3] Setbacks, minimum | Principal Building | Accessory Structure B | Front | 12 ft, and 3 ft from sidewalk or planned sidewalk [4] | 12 ft, and 3 ft from sidewalk or planned sidewalk [4] C | Side | 5 ft [5] | 5 ft [5] D | Rear | 20 ft [5] | 5 ft [5] Street-Facing Garage | 20 ft measured from sidewalk or planned sidewalk to face of garage Building Separation | 10 ft between principal buildings Height, maximum | Principal Building | Accessory Structure Height | 40 ft [6] | 16 ft/29 ft/12 ft [7] Other Building coverage, maximum: 50%, or common open space shall be provided equal to at least 20% of the gross floor area [8] Usable yard, minimum: 400 sf Accessory uses/structures: See Chapter 18.03 Article 4 Site and building standards for Urban Districts: See Chapter 18.04 Article 10 Development standards (parking, landscaping, etc.): See Chapter 18.04 Notes: [1] See general standards for density in MD districts in Section 18.04.1003(a)(4). [2] FAR may be increased for east of or fronting Ralston Street or fronting Second Street. [3] Maximum density is 45 du/acre for parcels fronting Second Street or fronting and west of Ralston Street. No maximum density between Ralston and Arlington streets. [4] See general standards for front setbacks in MD districts in Section 18.04.1003(a)(2). Front setbacks shall be measured from the back of the curb or proposed curb. [5] A minimum zero-foot setback is allowed when the property line abuts an alley and at least 24 feet of backup space (including the alley) is provided from all garage doors. [6] Maximum height is 65 for parcels fronting Second Street or fronting and west of Ralston Street. Maximum height is 105 feet between Ralston and Arlington streets. [7] 29 feet maximum for a single accessory building on each lot; 16 feet maximum for one-story residential garage or carport; 12 feet maximum for all other accessory structures. [8] Maximum building coverage may be increased for parcels east of or fronting Ralston Street or fronting Second Street.
(Ord. No. 6692, § 1(Exh. A), 1-8-25)
Ask a question about Reno law
Corpus searches the Reno sections it holds and shows the ones that match, with their citations. Free, no sign-in.
