Sec. 74.64. - Restoration and rehabilitation.
(a) General Principles: The Historic Hill District design guidelines for restoration and rehabilitation are based on the ten (10) standards for rehabilitation developed by the National Park Service, United States Department of the Interior. These standards are published in a 59-page pamphlet entitled The Secretary of the Interior's Standards for Rehabilitation and Guidelines for Rehabilitating Historic Buildings (Revised 1983), available for two dollars ($2.00) from the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402 (GPO stock number 024-005-01003-3). In addition to the standards themselves, the pamphlet contains examples of recommended approaches to rehabilitation. All projects that owners wish to be certified for purposes of federal historic rehabilitation tax incentives are reviewed and evaluated by the state historic preservation office for conformance with the secretary of the Interior's Standards for Rehabilitation. The ten (10) standards are as follows:
(1) Every reasonable effort shall be made to provide a compatible use for a property which requires minimal alteration of the building, structure, or site and its environment, or to use a property for its originally intended purpose.
(2) The distinguishing original qualities or character of a building, structure, or site and its environment shall not be destroyed. The removal or alteration of any historic material or distinctive architectural features should be avoided when possible.
(3) All buildings, structures and sites shall be recognized as products of their own time. Alterations that have no historical basis and which seek to create an earlier appearance shall be discouraged.
(4) Changes which may have taken place in the course of time are evidence of the history and development of a building, structure, or site and its environment. These changes may have acquired significance in their own right and this significance shall be recognized and respected.
(5) Distinctive stylistic features or examples of skilled craftsmanship which characterize a building, structure or site shall be treated with sensitivity.
(6) Deteriorated architectural features shall be repaired rather than replaced, whenever possible. In the event replacement is necessary, the new material should match the material being replaced in composition, design, color, texture and other visual qualities. Repair or replacement of missing architectural features should be based on accurate duplications of features, substantiated by historic, physical or pictorial evidence rather than on conjectural designs or the availability of different architectural elements from other buildings or structures.
(7) The surface cleaning of structures shall be undertaken with the gentlest means possible. Sandblasting and other cleaning methods that will damage the historic building materials shall not be undertaken.
(8) Every reasonable effort shall be made to protect and preserve archaeological resources affected by or adjacent to any project.
(9) Contemporary design for alterations and additions to existing properties shall not be discouraged when such alterations and additions do not destroy significant historical, architectural or cultural material, and such design is compatible with the size, scale, color, material and character of the property, neighborhood or environment.
(10) Wherever possible, new additions or alterations to structures shall be done in such a manner that if such alterations were to be removed in the future, the essential form and integrity of the structure would be unimpaired.
(b) Masonry and Foundations:
(1) Whenever possible, original masonry and mortar should be retained without the application of any surface treatment. Masonry should be cleaned only when necessary to halt deterioration and always with the gentlest method possible, such as low-pressure water and soft natural bristle brushes. Brick and stone surfaces should not be sandblasted because it erodes the surface of the material and accelerates deterioration. Chemical cleaning products which could have an adverse chemical reaction with the masonry material should not be used.
(2) Original mortar joint size and profile should be retained and replacement mortar should match the original mortar in color and texture. Materials and ingredient proportions similar to the original mortar should be used when repointing, with replacement mortar softer than the masonry units and no harder than the historic mortar. This will create a bond similar to the original and is necessary to prevent damage to the masonry units. Repointing with mortar of high portland cement content often creates a bond stronger than is appropriate for the original building materials, possibly resulting in cracking or other damage. Mortar joints should be carefully washed after setup to retain the neatness of the joint lines and keep extraneous mortar off of masonry surfaces.
(3) The original color and texture of masonry surfaces should be retained. While unpainted masonry surfaces should not be painted, paint should not be indiscriminately removed from masonry surfaces because some brick surfaces were originally meant to be painted.
(c) Siding and Surface Treatment:
(1) Deteriorated siding materials should be replaced with material used in original construction or with materials that resemble the appearance of the old as closely as possible. Resurfacing frame buildings with new material such as artificial stone, artificial brick veneer, or asbestos and asphalt shingles is inappropriate and should not be done. Four-inch lap vinyl, metal or hardboard siding may be used in some cases to resurface clapboard structures, especially structures categorized as noncontributive to the district, if well detailed, well designed and in keeping with the historic character of the structure. Ventilation must be carefully provided when using these products to prevent damage to the original wood fabric by trapping moisture. The width, pattern and profile of the original siding should be duplicated. Residing should not alter the profile of bordering trim such as drip caps, frieze boards and corner boards; if replacement is necessary, they should be matched.
(2) Color is a significant design element and paint colors should be appropriate to the period and style of the structure. Building permits are not required for painting and, although the heritage preservation commission may review and comment on paint color, paint color is not subject to commission approval.
(d) Roofs:
(1) Original roofing materials should be retained unless deteriorated. When partially reroofing, deteriorated roof coverings should be replaced with new materials that match the old in composition, size, shape and texture. When entirely reroofing, new materials which differ to such an extent from the old in composition, size, shape, color or texture that the appearance of the building is altered should not be used.
(2) Wood shingles in the nineteenth century were often dipped in creosote to preserve them, giving them a very dark brown color. Victorians often stained wood shingles deep red or dark green to complement rather than match the color of the house. When asphalt shingles began to be used in the 1890's, the most common colors were solid, uniform, deep red and solid, uniform, dark green. A weathered-wood color may be acceptable for new asphalt shingles because it is neutral and blends in. Black may be acceptable for Colonial Revival houses built after the 1920's, but it should be avoided for Victorian houses.
(3) The original roof type, slope and overhangs should be preserved. New dormers may be acceptable in some cases if compatible with the original design. Modern skylights are a simple way to alter a roof to admit light and air without disrupting its plane surface, are less noticeable than dormers, and may also be acceptable. Skylights should be flat and as close to the roof plane as possible. They should not be placed on the front roof plane.
(e) Windows and Doors:
(1) Existing window and door openings should be retained. New window and door openings should not be introduced into principal elevations. Enlarging or reducing window or door openings to fit stock window sash or new stock door sizes should not be done. The size of window panes or sash should not be altered. Such changes destroy the scale and proportion of the building.
(2) Window sash, glass, lintels, sills, architraves, doors, pediments, hoods, steps and all hardware should be retained. Discarding original doors and door hardware, when they can be repaired and reused in place, should be avoided.
(3) The stylistic period(s) a building represents should be respected. If replacement of window sash or doors is necessary, the replacement should duplicate the material, design and hardware of the older window sash or door. Inappropriate new window and door features such as aluminum storm and screen window combinations, plastic or metal strip awnings, or fake shutters that disturb the character and appearance of the building should not be used. Combination storm windows should have wood frames or be painted to match trim colors.
(f) Porches and Exterior Architectural Features:
(1) Porches and steps which are appropriate to the building and its development should be retained. Porches and additions reflecting later styles of architecture are often important to the building's historical integrity and, whenever possible, should be retained. Porches and steps removed from the building should be reconstructed, using photographic documentation and historical research, to be compatible in design and detail with the period and style of the building. In replacing porch railings, it is important to maintain the original spacing, section and profile of the balustrades.
(2) Decorative architectural features such as cornices, brackets, railings, and those around front doors and windows should be preserved. New material used to repair or replace, where necessary, deteriorated architectural features of wood, iron, cast iron, terracotta, tile and brick should match the original as closely as possible.
(3) Shutters should not be used on buildings not designed for them. If used, they should be large enough to cover the entire window area, should be functional and operable, and should not look as if they were simply flat-mounted on the wall.
(4) Deck and firestair additions may be acceptable in some cases, but should be kept to the rear of buildings where they will be the most inconspicuous and detract the least from the historical context. The detailing of decks and exterior stairs should be compatible with the period and style of the building.
(Ord. No. 17815, § 3(II) 4-2-91)