§ 25-117 — Pretreatment requirements
Code of Ordinances, City of Meridian, Mississippi (Supp. No. 55: codified through Ordinance No. 4604, enacted October 21, 2025) · Meridian Code of Ordinances § 25-117
Corpus is an independent public-information project, not the official City of Meridian website. Stable reference: corpuslaw.us/code/2c82762c-90b0-441e-9180-3a32caa14858
Sec. 25-117. - Pretreatment requirements.
Except where waived by written approval from the public works department, the minimum pretreatment of wastewater being discharged to the public wastewater system for transport to the wastewater treatment plant shall meet maximum concentrations as published in current state and federal regulatory guidance. All industrial and commercial process wastewater shall be pretreated prior to discharge to the public sewers, if necessary, in accordance with the provisions of the United States Environmental Protection Agency, the Mississippi Department of Environmental Quality, and/or the city, whichever is more stringent. The minimum pretreatment requirements are as follows: (l) Compatible pollutants: Parameters | Average Monthly Quantity (lbs/day) | Maximum Daily Quantity (lbs/day) BOD 5 | 500 | 750 Total Suspended Solids (TSS) | 500 | 750 TKN | 50 | 75 *BOD 5 , SS, TKN, fats, oils and grease may be increased by written approval of the city engineer for limited periods of time. (2) Incompatible pollutants: An industrial waste survey is required prior to an industrial user, consumer, or other person discharging wastewater containing in excess of the following daily average discharge limits. Industrial waste survey information will be used to develop user-specific local limits when necessary to ensure that the wastewater treatment plant's maximum allowable headworks loading is not exceeded for particular pollutants of concern. User-specific local limits for appropriate pollutants of concern shall be included in wastewater pretreatment permits. Parameter | Maximum Concentration (mg/l) Arsenic | 0.05 Barium | 5.0 Boron | 1.0 Cadmium | 0.05 Chromium | 0.10 Copper | 0.05 Cyanide | 0.05 Lead | 0.10 Manganese | 1.0 Mercury | 0.05 Nickel | 0.10 Selenium | 0.05 Silver | 0.1 Zinc | 0.10 Chlorinated hydrocarbons | 100 Phenolic Compounds | 100 As a condition for authorization to dispose of industrial wastes through the municipal system, the industrial user shall provide the city with information describing wastewater constituents and characteristics, and the type of activity and quantity of production. All food service establishments and all vehicle maintenance facilities connected to the city's sanitary sewer system shall install, maintain, and keep in continuous operation, a grease trap interceptor. The interceptor shall be sized in accordance with standards established by the public works department and described in the FOG Management and Enforcement Response Guide. Food preparation or serving facilities and vehicle maintenance facilities shall maintain a written record of maintenance performed on the interceptor for a minimum of three (3) years and shall immediately produce that record upon the city's request.
(Ord. No. 3691, Art. V, § 5, 5-1-84; Ord. No. 4575, 6-20-23)
Ask a question about Meridian law
Corpus searches the Meridian sections it holds and shows the ones that match, with their citations. Free, no sign-in.
