Surcharge when concentration of BOD, suspended solids or oil and grease exceeds normal sewage.
Kansas City Code § 60-192
in effectSec. 60-192. - Surcharge when concentration of BOD, suspended solids or oil and grease exceeds normal sewage.
(a) Imposition. When the BOD, suspended solids and/or oil and grease concentration of a discharge exceeds the maximum concentration of any or all of these components in normal sewage, a surcharge or surcharges established by the formula hereinafter set forth shall be levied in addition to the normal sewer service charge.
(b) Computation of amount. The surcharge shall be computed by using the formulae:
SBOD = (V § )(0.00624)(RB)(BOD = 250)
Sss = (V § )(0.00624)(RS)(SS = 250)
SO&G = (V § )(0.00624)(RG)(OG = 30)
ESC = Extra strength control charges
The symbols, letters or figures employed in the formulae signify:
SBOD, SSS and SO&G = Extra strength surcharges in dollars.
V § = Wastewater volume in hundred cubic feet.
0.00624 = Conversion factor from milligrams per liter to pounds per hundred cubic feet.
RB = Surcharge rate established in article I of this chapter, as the same now exists or may hereafter be amended, in dollars for the treatment of each pound of BOD in excess of 250 mg/l which is the concentration of normal sewage.
BOD = BOD concentration of the discharge in milligrams per liter.
RS = Surcharge rate established in article I of this chapter, as the same now exists or may hereafter be amended, in dollars for the treatment of each pound of suspended solids in excess of 250 mg/l which is the concentration of normal sewage.
SS = Suspended solids concentration of the discharge in milligrams per liter.
RG = Surcharge rate established in article I of this chapter, as the same now exists or may hereafter be amended, in dollars for the treatment of each pound of oil and grease in excess of 30 mg/l which is the concentration of normal sewage.
OG = Oil and grease concentration of the discharge in milligrams per liter.
ESC = Extra strength control charge.
The extra strength control (ESC) charge shall be the actual departmental cost for each individual user, including overhead, related to obtaining, measuring and analyzing wastewater samples to determine wastewater strengths for billing purposes. The director shall determine the method and frequency of said testing as may be reasonable for each industrial user in accordance with recognized engineering practices; provided, however, that an industrial user shall be entitled to additional sampling at its request upon payment of additional costs therefor. In lieu of sampling and analysis by the city, the director, at his discretion, may permit an industrial user to collect and analyze samples of its own wastewater at its own expense, provided that samples are taken at least annually and collected and analyzed in accordance with standard laboratory methods and the results are certified by a professional engineer registered in the state. The city reserves the right to verify any such submitted data.
(Ord. No. 120551, § 1, 6-28-12)
Source: City of Kansas City, Missouri, Code of Ordinances, Charter and Zoning and Development Code (Municode Library, library.municode.com)URL: https://library.municode.com/mo/kansas_city/codes/code_of_ordinances?nodeId=COORKAMIVOII_CH60SESEDI_ARTIVCOINWA_DIV9FECO_S60-192SUWHCOBOSUSOOIGREXNOSEFetched: 10/28/2026
