§ 13-2-371 - ADDITIONAL REQUIREMENTS.
(A) The requirements of this section apply to operation of a group cycle and are in addition to the requirements in Sections 13-2-363 (Group Cycle Service Requirements), 13-2-364 (Group Cycle Service Application Requirements), and 13-2-365 (Group Cycle Service Inspection Requirements).
(B) An application for an operating authority must describe the fare structure or structures, which must be posted in the group cycle in a manner approved by the department. Fare rates may be fixed, negotiated with the passenger, or for tips only, and must be agreed upon prior to service being rendered.
(C) A group cycle service may only operate on routes approved by the department in writing unless otherwise directed by the department, a police officer, or other official emergency personnel.
(D) A group cycle service may not operate on any roadway with a speed limit exceeding 35 miles per hour.
(E) A group cycle driver must:
(1) comply with the traffic laws and regulations applicable to vehicles in addition to the requirements of this section;
(2) comply with the requirements of Section 13-2-54 (Display and Inspection of Driver Credentials) and Section 13-2-55 (Rest Periods for Drivers);
(3) limit operation to the travel lane nearest the curb or edge of the roadway, except when necessary to negotiate an obstruction, to turn onto another roadway, or to enter a private driveway; and
(4) not consume, sell, or serve any beverage containing alcohol.
(F) In addition to the requirements of Section 13-2-314 (Non-Motorized Service Inspection Requirements), a group cycle must meet the standards specified in this subsection.
(1) A group cycle must be maintained according to the following standards:
(a) floorboards must have non-skid contact surfaces without holes;
(b) brakes must be capable of making a braked wheel stop within a distance determined by the department;
(c) each group cycle must be equipped with a disc brake system, or other reliable braking system, as approved by the department;
(d) a group cycle must be equipped with a minimum of two front white headlamps affixed at least two feet apart and level with one another horizontally, and visible from a distance of at least 500 feet;
(e) a group cycle must be equipped with two red lights mounted on the rear affixed at least two feet apart and level with one another horizontally, and visible from a distance of at least 500 feet;
(f) passenger seating must be approved by the department;
(g) the group cycle paint may not be noticeably rusted, flaked, scraped, or faded. Paint repairs must be neat and inconspicuous;
(h) any sharp edges or open tubes must be capped in a manner approved by the department; and
(i) any additional requirements established by the department.
(2) A group cycle must display the following:
(a) a company name, telephone number, and individual unit number, with clear and legible lettering displayed in characters at least 1¾ inches in height and at least 1 inch in width, with colors contrasting the color of the group cycle;
(b) a permit decal, valid annual city inspection decal; and
(c) a slow-moving vehicle emblem that:
(i) complies with Section 547.108 of the Texas Transportation Code;
(ii) is displayed on the rear of the group cycle and mounted in a manner approved by the department; and
(iii) uses a reflective surface visible day or night from a distance of 500 feet.
(G) The department may immediately require a vehicle to be removed from service for any violation of a safety-related requirement of this section.
(H) Group cycle passengers must sit on a seat in the group cycle and not in any other place on or in the group cycle, including the lap of another passenger. If a passenger refuses to comply with this requirement, a driver must stop the group cycle and ask the passenger to exit the group cycle.
(I) Only the driver may occupy the center isle while the group cycle is in motion.
(J) Group cycle passengers must be seated while the group cycle is in motion.
(K) No group cycle shall transport more passengers than the vehicle has seats.
(L) The maximum capacity of a group cycle shall be fifteen, including the driver.
(M) No group cycle shall stand or park within any public roadway, sidewalk, or walkway. Group cycles may utilize any commercial loading zone to stand or rest.
Source: Ord. No. 20190919-144, Pt. 7, 9-30-19.