§ 35.4.310 — Site Signs
Code of the City of Glendale, Arizona (Supp. No. 115: codified through Ordinance No. O26-19, adopted April 14, 2026) · Glendale City Code § 35.4.310
Corpus is an independent public-information project, not the official City of Glendale website. Stable reference: corpuslaw.us/code/34a77501-239f-44db-bb97-8bb0c7768d54
35.4.310 - Site Signs.
This Section is comprised of permitted Site Signs and their respective regulations. Signs not appearing in this Section shall be considered prohibited. A. Billboards, Static 1. Permit required. 2. Static billboards shall be prohibited in the designated Loop 101 Scenic Corridor. a. No static billboard shall be erected within six hundred sixty (660) feet of the planned or existing freeway, expressway, parkway, right-of-way, or planned corridor, as officially designated by the Arizona Department of Transportation or the City of Glendale. 3. No new static billboards may be constructed within the city unless the person desiring to construct such a static billboard submits evidence to the City that the person has removed an existing static billboard from within the municipal limits of the City of Glendale. If evidence is submitted that a static billboard has been removed after the effective date of this ordinance, the City shall issue building and sign permits for one (1) new static billboard not to exceed the area of the sign which was removed or three hundred (300) square feet, whichever is less. However, if a person submits evidence that in excess of three hundred (300) square feet of static billboard area has been removed, by the removal of four (4) or more static billboards with an area of seventy-five (75) square feet or less, the City shall issue building permits for one (1) new static billboard with a maximum area of three hundred (300) square feet. Any new static billboard shall be erected, constructed, or placed within six (6) months after removal of the static billboard(s) it is replacing. 4. All static billboards erected, placed, or altered within the city shall comply with the following requirements: a. The space between the newly erected, placed, constructed, or altered static billboard and any existing static billboard shall not be less than six hundred (600) feet. b. All static billboards shall have landscaping around the base at a rate of fifteen (15) square feet per linear foot of sign. c. Off-site improvements or appropriate financial assurance as approved by the City shall be required along any abutting street for the full frontage of the property where the static billboard is to be located. d. No part of such sign structures shall be erected closer to a street than the front line of the nearest building which is within one hundred (100) feet of the sign and which fronts on that street; provided, however, that when a sign is erected between two (2) buildings which both front on the same street and which are both within one hundred (100) feet of the sign, then the sign shall not be erected closer to that street than a line drawn from the nearest front corner of each building. e. If no building is located within one hundred (100) feet of the static billboard, the sign structure shall be set back in accordance with the setback requirements of the zoning district in which located, but shall not be less than ten (10) feet behind a front property line. f. Notwithstanding any other provision in this section, no static billboards shall be erected, placed, constructed, or altered within the city which have an area exceeding three hundred (300) square feet or a height exceeding twenty-five (25) feet. g. The static billboard's structure, not including the sign copy, shall be compatible with the color, reflectivity, and other qualities of its surrounding environment. h. No static billboard shall have more than one (1) support column. i. Access ladders to maintenance platforms shall be constructed or maintained in such a position as not to project beyond a visual envelope established by structural elements or projections of the sign face and trim to the ground as viewed from a place parallel to the face of the sign. j. Other than support columns, maintenance walkways, embellishments, ends, cross bracings, tops or bottoms, parallel or V-shaped signs, no back braces, torque arms, stringers, panel attachments, or similar structural elements or accessories shall be exposed. If such elements or accessories are not covered by a sign face, screening of such elements or accessories shall be colored similarly to the remaining portions of the sign back. B. Billboards, Digital (Electronic) 1. Permit required. 2. Digital billboards shall be prohibited in the designated Loop 101 Scenic Corridor. 3. Placing a digital billboard sign requires that the zoning of the lot on which the digital billboard sign is located must be Planned Area Development (PAD). 4. All digital billboards erected, placed, or altered within the city shall comply with the following requirements: a. Placing a digital billboard sign requires the approved Planned Area Development (PAD) to be located in Township 2 North, Range 1 East, Gila and Salt River Base and Meridian, Township 2 North, Range 2 West, Gila and Salt River Base and Meridian, or Township 3 North, Range 2 West, Gila and Salt River Base and Meridian, and to have a minimum of: i. One thousand (1,000) feet of lineal frontage adjacent to Loop 101 (Agua Fria Freeway) or one thousand (1,000) feet of lineal frontage adjacent to Loop 303 (Estrella Freeway), or ii. Regardless of lineal frontage, any PAD adjacent to the Loop 303 that was approved prior to December 31, 2023, is allowed a minimum of one digital billboard sign per approved PAD. The placement of any additional digital billboards beyond this minimum shall be in compliance with all other applicable regulations and standards of this code. iii. Planned Area Developments approved within the boundaries of an existing approved Planned Area Development shall not be granted additional digital billboards, beyond the maximum number allowed by this ordinance, within the original approved Planned Area Development. b. The digital billboard sign must be located within three hundred (300) feet of the freeway right-of-way. c. There shall be a minimum distance of one thousand seven hundred sixty (1,760) feet between all digital billboard signs on any single Planned Area Development. d. All digital billboard signs must be set back a minimum of three hundred thirty (330) feet from the property line of any adjacent property not a part of the same approved Planned Area Development having frontage on Loop 101 (Agua Fria Freeway) or Loop 303 (Estrella Freeway). This setback is not applicable to the property line, which is adjacent to the freeway right-of-way. Any PAD adjacent to the Loop 303 that was approved prior to December 31, 2023, and has less than six hundred and sixty (660) feet of lineal freeway frontage, may request relief from this requirement through the Administrative Review process. e. Maximum sign height, including any supporting structures, for a digital billboard sign must be no more than sixty (60) feet. f. Maximum digital billboard sign width must be no more than fifty (50) feet. g. Maximum digital billboard sign area must not exceed six hundred seventy-five (675) square feet. h. The message or image of the digital billboard sign may be static or change at specific or programmed time intervals. The change in message or images shall occur no more frequently than once every eight (8) seconds and shall not have fade or dissolve transitions, or full animation or video, or similar subtle transitions or frame effects that have the appearance of moving text or images. A default black display shall be required in the event of a malfunction. i. Message sequencing, the use of multiple digital billboards in a row to convey a message, shall be prohibited. j. Advertisements shall be limited to single frames. k. Provisions in this section supplement and do not supersede provisions of any PAD in existence before the effective date of this ordinance. l. Design Review approval is required to allow any digital billboard sign. m. No digital billboard shall be located within one thousand (1000) feet of any single residence zoning district including RR-90, RR-45, SR-30, SR-17, SR-12, R1-10, R1- 8, R1-7, R1-6, R1-4, R-2, R-3, or property within unincorporated Maricopa County for which a plat was filed and recorded prior to January 1, 2000. n. Only one digital billboard sign shall be erected prior to the first phase of development on a PAD. All additional digital billboard signs shall be integrated into the PAD and have a relationship to the development, including common design elements such as styles and materials, and a functional relationship to the structures, parking, and open spaces in the development. The height, location, materials, color, texture, setbacks, and mass of the additional digital billboard signs must be appropriate to the development, the neighborhood, and the community. The architectural character of the proposed additional digital billboard sign shall be in harmony with, and compatible to, structures in the neighboring environment and the architectural character desired for the city, avoiding excessive variety or monotonous repetition. All additional digital billboard signs shall be reviewed only as part of the review of the Master Development Plan of the property and integrated with surrounding buildings and landscaping. Additional digital billboard signs will be permitted only as part of a comprehensive sign package for the entire PAD, which includes common design elements. Digital billboards must be fully integrated into this comprehensive sign package. o. Digital billboard sign illumination must be extinguished between 11:00 p.m. and sunrise. The only exception to this will be for amber alerts and other governmental emergencies. p. All illuminated digital billboard signs shall have unlimited daytime surface luminosity and shall be limited to 310 foot-candles during nighttime hours. q. All digital billboard signs shall provide for automatic dimming based upon ambient lighting conditions, including evening and overcast weather. r. It shall be unlawful for any digital billboard sign to have an illuminance greater than 1.0-foot candle at the property line of any adjacent property. s. Any approved digital billboard sign shall adhere to new safety requirements if conclusive research findings develop. t. All digital billboard signs shall receive all required licenses prior to approval. C. Directional 1. No permit required, excluding building permits. 2. Directional signs when required to assist the flow of traffic shall not exceed six (6) square feet in area or a height of three (3) feet. Directional Sign [image omitted; see the official code] D. Directory 1. Permit required when sign is legible and intended to be legible from the public right-of-way. 2. Directory signs when required for multiple residence developments or other permitted facilities containing multiple tenants or building groups shall comply with the following requirements: a. The sign shall not exceed a height of eight (8) feet. b. The maximum sign area for each sign face is thirty (30) square feet. c. Each directory shall be illuminated with a maximum area of eighteen (18) square feet for each sign face and a maximum height of six (6) feet. d. The number and location of the signs must comply with fire department requirements. Directory Sign [image omitted; see the official code] E. Drive-up/Drive-through 1. Permit required. 2. The following standards apply to drive-through signs: a. Drive-through signs are limited to two (2) per drive-through lane. b. Drive-through signs are limited to sixty-four (64) square feet in total sign area and six (6) feet in height. The drive-through sign may be designed as separate ground or wall mounted signs grouped together or may include the use of one preview board installed prior to one point of order board, however the total area of all signs shall not exceed sixty-four (64) square feet. c. In addition, drive-through signs are permitted ten (10) square feet of sign area for temporary signs attached to the top or sides of the drive-through sign. d. Drive-through signs shall be located a minimum of one hundred (100) feet from any residential use. This is measured from the sign face to the nearest edge of any residential zoning district. e. Drive-through signs shall be internally illuminated. Drive-through signs may also contain an electronic or video display screen and audio component for interaction with the customer. External illumination of drive-through signs may be permitted, provided lighting is shielded and directed on the sign face only. Drive-up/Drive-through Sign [image omitted; see the official code] F. Electronic Reader Panel 1. Permit required. 2. Commercial, civic, and institutional uses may have one (1) freestanding reader panel sign not to exceed thirty-two (32) square feet in area and fourteen (14) feet in height per street frontage. 3. Commercial, civic, and institutional uses may use up to one-half (½) of the allowed freestanding sign area for a reader panel. 4. The following uses in any district are permitted an electronic sign: cultural facility, educational facility—primary or secondary, educational facility—university or college, government office/facility, park/playground, place of worship. 5. Reader panel signs shall be no closer than one hundred fifty (150) lineal feet from a single-family residential use. 6. Only one electronic sign per street frontage is permitted. 7. Each message or image displayed on an electronic sign shall be static for a minimum of eight (8) seconds. Electronic signs shall display static text messages only, with no animation or effects simulating animation or video. 8. Scrolling, flashing, animation, or movement of the message or any component of the sign is prohibited. Any message change sequence shall be accomplished immediately by changing from one screen to another without transition effect. Message displays shall not change more than once every eight (8) seconds. 9. Electronic reader panel displays shall have an automatic dimmer control to allow for automatic dimming of the intensity of the sign illumination and accommodate varying light conditions 10. Electronic reader panel displays shall not increase the brightness level by more than 0.3 foot-candles over ambient brightness levels at the property line as measured by foot candle meter. G. Entry Wall Monument 1. Residential Uses a. Permit required. b. Two (2) signs per main access point to the development or subdivision. c. Maximum height of six (6) feet or the height of wall on which it will be installed, whichever is less. d. Maximum sign area of thirty-two (32) square feet. Sign area shall not exceed thirty percent (30%) of the wall area on which it is installed. 2. Non-Residential Uses a. Permit required. b. One (1) sign per main access point to the development or subdivision. c. Maximum height of four (4) feet or the height of the parking screen wall, whichever is less. d. Maximum sign area of thirty-six (36) square feet. Sign area shall not exceed forty percent (40%) of the wall area on which it is installed. 3. Illumination shall be limited to backlighting of individual pan-channel style letters or external projected lighting provided light source is shielded from view from the public right-of-way and residential uses. 4. No portion of the sign shall extend more than twelve (12) inches from the face of the wall on which the sign is installed. 5. Signs shall incorporate key design elements of the development to which it belongs such as colors, materials, and proportion. H. Freestanding Monument 1. Permit required. 2. One (1) freestanding monument sign shall be permitted per two hundred (200) linear feet of street frontage. Properties with less than two hundred (200) linear feet of street frontage shall be limited to one (1) freestanding monument sign. 3. Freestanding signs shall not exceed the following heights, except where modified herein: a. Placed along Major Arterial Roads and Parkways (including Bell Road and Grand Avenue): Fourteen (14) feet. b. Placed along Arterial Roads (excluding Glendale Avenue between 54th Ave and 59th Ave): Ten (10) feet. c. Placed along All other roads (including Glendale Avenue between 54th Ave and 59th Ave): Eight (8) feet. 4. Freestanding Monument signs shall not exceed the following areas, except where modified herein: a. Placed along Major Arterial Roads and Parkways (including Bell Road and Grand Avenue): Eighty (80) square feet or one hundred ten (110) square feet for parcels over twenty (20) acres. b. Placed along Arterial Roads (excluding Glendale Avenue between 54th Ave and 59th Ave): Sixty (60) square feet or eighty (80) square feet for parcels over twenty (20) acres. c. Placed along All Other Roads (including Glendale Avenue between 54th Ave and 59th Ave): Thirty-two (32) square feet or sixty (60) square feet for parcels over twenty (20) acres. 5. The base shall have an aggregate width of at least fifty percent (50%) of the width of the sign. 6. C-O and G-O Zoning Districts: a. The sign shall not exceed a height of eight (8) feet and forty-eight (48) square feet in area when the project includes a building of ten thousand (10,000) square feet or more and the site has a minimum of three hundred thirty (330) lineal feet of continuous frontage on an arterial street. b. The maximum sign area is twenty-four (24) square feet on parcels up to two (2) acres and thirty-six (36) square feet for parcels over two (2) acres. 7. R-O Zoning District: The maximum sign area is twelve (12) square feet. a. The base of any freestanding sign shall have an aggregate width of at least fifty percent (50%) of the width of the sign. b. The sign must include the number of the street address, but the area of these numerals shall not be included in calculating the allowed sign area. Freestanding Monument Sign [image omitted; see the official code] I. Pylon 1. Permit required. 2. Permitted along Loop 101, Loop 303, Northern Parkway, and Grand Avenue only. 3. Maximum height: a. Loop 101 and Loop 303: Sixty (60) feet. b. Grand Avenue and Northern Parkway: Twenty (20) feet. 4. Maximum area: a. Loop 101 and Loop 303: Two hundred fifty (250) square feet. b. Grand Avenue and Northern Parkway: One hundred twenty-five (125) square feet. 5. Minimum street frontage required: Six hundred (600) feet. 6. One Pylon Sign permitted per six hundred (600) feet of street frontage, 7. Maximum of three (3) Pylon Signs per development along the Loop 101 and Loop 303 8. Maximum of two (2) Pylon Signs per development along Grand Avenue and Northern Parkway. 9. Pylon signs shall incorporate complementary design elements from the development associated with the sign. 10. Illumination shall be limited to internal illumination only. 11. The base shall have an aggregate width of at least fifty percent (50%) of the width of the sign. Pylon Sign [image omitted; see the official code]
(Ord. No. O25-42, § 1, 9-23-25)
Ask a question about Glendale law
Corpus searches the Glendale sections it holds and shows the ones that match, with their citations. Free, no sign-in.
