§ 15-1504 — SITE DESIGN DEVELOPMENT STANDARDS
Fresno Municipal Code (Supp. No. 55, Update 1 (online June 23, 2026): codified through Ordinance No. 2026-019) · Fresno Municipal Code § 15-1504
Corpus is an independent public-information project, not the official City of Fresno website. Stable reference: corpuslaw.us/code/36c67cff-182a-47e6-9dcd-207e96469412
SEC. 15-1504. - SITE DESIGN DEVELOPMENT STANDARDS.
A. Active Uses Adjacent to Sidewalks. In order to promote activity on all sidewalks, and to focus the highest activity levels in the most beneficial areas, the following standards shall apply to all ground-floor building space located within 30 feet of a public street: 1. Activity Classifications. Uses shall be Permitted, Conditionally Permitted, or Prohibited based on the adjacent street's activity classification as identified in Figure 1501 and Table 15-1502. 2. Active to Inactive Space Ratio. a. Activity Class A. No less than 90 percent of the length of building frontage along public streets shall be designed to be occupied by active spaces, such as lobbies, dining areas, living areas, and sales floors. The remaining 10 percent may consist of inactive spaces, such as kitchens, hallways, utility rooms, storage, emergency exits, display cases, etc. b. Activity Class B and C. No less than 60 percent of the length building frontage along public streets shall be designed to be occupied by active spaces, such as lobbies, dining areas, living areas, and sales floors. The remaining 40 percent may consist of inactive spaces, such as kitchens, hallways, utility rooms, storage, emergency exits, display cases, etc. c. Sites with Multiple Frontages. The street of highest pedestrian importance, as determined by the Review Authority, shall comply with subparagraphs a and b above. Other street frontages may provide reduced active spaces as determined by the Review Authority. B. Mixed-Use Configurations. Buildings shall be designed to minimize the potential conflicts between residential and non-residential uses adjacent to one another or within the same building to the satisfaction of the Review Authority. Potential techniques include: 1. Sound attenuation/transmission requirements of the California Building Code; 2. Distinct entries for non-residential and residential suites/units; 3. Ventilation of ground floor uses so as not to disrupt upper floor tenants. C. Required Minimum Height. 1. Required minimum heights are applicable only in the DTC District as put forth by the following diagram. [image omitted; see the official code] FIGURE 1504-C: REQUIRED MINIMUM HEIGHTS 2. New structures shall meet both the minimum number of floors and the minimum height in feet. No more than the front 30 feet of lot depth, measured from all streets on which the project has frontage, shall be subject to Required Minimum Height regulations. 3. Existing structures which are remodeled or otherwise modified shall not be required to comply with Required Minimum Height regulations unless the gross floor area is increased by more than 100 percent. 4. Additions to designated historic resources shall not be required to comply with Required Minimum Height regulations. 5. Portions of the building that are not part of the primary building mass, such as entrance porticos, bays and stoops, are not required to meet minimum height requirements. Parking podiums, garages, and accessory buildings are not required to meet minimum height requirements. D. Special Noise Standards. Within the portion of the DTN District that is south of Inyo Street, the following special noise standards apply. 1. Stationary Noise Standards. This area is exempted from Subsection 15-2605-D. The following maximum noise levels in Table 15-1504-D apply. TABLE 15-1504-D: MAXIMUM NOISE EXPOSURE LEVELS FOR SOUTH OF INYO STREET Daytime 7am—10pm | Nighttime 10pm—7am Maximum Sound Level (Lmax), dBA | 70 | 60 2. Residential Uses. New residential development shall anticipate maximum allowable noise levels and provide noise protection to maintain an interior noise level at 45 Leq, dB or lower. E. RS Transition Standards. Where a DT district abuts an RS District, the following standards apply: 1. Height. The maximum height within 40 feet of an RS District is limited to 30 feet. The maximum height within 100 feet of an RS District is 40 feet. 2. Setbacks. The following additional setback requirements shall be applied to all structures, including accessory structures, on parcels which are adjacent to an RS District: a. Front and Street Side Yard. The front setback shall not be less than the required front yard on the abutting RS District lot within 50 feet of the RS District. b. Interior Side and Rear. The interior side and rear setback abutting an RS District boundary shall be 20 feet. 3. Landscape. See Section 15-2305, Areas to be Landscaped. [image omitted; see the official code] FIGURE 15-1504-E: RS TRANSITION STANDARDS—DT DISTRICTS F. Corner Frontage. Buildings on corner lots must be located within a minimum of five feet of the back of the sidewalk for the minimum length specified in Table 15-1503. As determined by the Review Authority, plazas maybe located at the street corner provided the plaza meets the requirements of Section 15-1504-I.1.c and buildings are built to the edge of the plaza. [image omitted; see the official code] FIGURE 15-1504-F: CORNER FRONTAGE STANDARDS G. Parking Buffering. All parking facilities, whether public or private, shall be buffered as shown on Table 15-1503 based on the adjacent street activity classification as shown in Figure 15-1501 and the physical form of the parking as provided below: 1. Activity Class A. a. Surface Parking and Tuck-Under Parking. Surface and tuck-under (one row of surface parking with building area over it) parking must be located entirely behind a building space which is occupied by a permitted use or uses, which conforms to all applicable development standards, and which is no less than 30 feet deep. Accessory structures, sheds, parking attendant booths, and other such buildings shall not satisfy this requirement. b. Above Grade Structured Parking. All above grade levels of the parking structure must be located behind active, occupied building space for a depth of no less than 30 feet. c. Partially Submerged Podium Parking. Parking that is partially below the street grade must be located behind active, occupied space for a depth of no less than 30 feet. d. Underground Parking. Parking that is fully underground and below the street grade may extend from lot line to lot line. 2. Activity Class B. a. Surface Parking and Tuck-Under Parking. Surface and tuck-under parking (one row of surface parking with building area over it) must be located entirely behind a building space which is occupied by a permitted use or uses, which conforms to all applicable development standards, and which is no less than 30 feet deep. Accessory structures, sheds, parking attendant booths, and other such buildings shall not satisfy this requirement. b. Above Grade Structured Parking. The ground floor of the parking structure must be located behind active, occupied building space for a depth of no less than 30 feet. Upper floors of the parking structure are not required to be located behind non-parking uses or to be set back more than is required by the building setbacks. c. Partially Submerged Podium Parking. Parking that is partially below the street grade shall be buffered in the same manner as above grade structured parking, however it will not be subject to a buffering requirement if the following conditions are met: [image omitted; see the official code] Buffering all levels of structured parking on Activity Class A and B streets balances parking and placemaking goals. [image omitted; see the official code] On Activity Class A and B streets, surface parking must be set back from the street and located behind a building. i. No more than four feet of the partially submerged parking podium may extend above the street grade. ii. The partially submerged parking podium shall be screened along street facing elevations by foundation plant materials. Gates need not be screened. d. Underground Parking. Parking that is fully underground and below the street grade may extend from lot line to lot line. 3. Activity Class C. a. Surface Parking and Tuck-Under Parking. Surface and tuck-under parking (one row of surface parking with building area over it) shall be set back no less than 30 feet. For no less than 60 percent of the length the lot frontage along public streets, surface parking must be located behind a building space which is occupied by a permitted use or uses and which conforms to all applicable development standards and which is no less than 30 feet deep. Accessory structures, sheds, parking attendant booths, and other such buildings shall not satisfy this requirement. For the remainder of the lot frontage, the setback may be landscaped, a public plaza, an outdoor dining area, or similar treatment as determined by the Review Authority. b. Above Grade Structured Parking. The ground floor of the parking structure must be located behind active, occupied building space for a depth of no less than 30 feet. Upper floors of the parking structure are not required to be located behind non-parking uses or to be set back more than is required by the building setbacks. c. Partially Submerged Podium Parking. Parking that is partially below the street grade shall be buffered in the same manner as above grade structured parking, however it will not be subject to a buffering requirement if the following conditions are met: i. No more than four feet of the partially submerged parking podium may extend above the street grade. ii. The partially submerged parking podium shall be screened along street facing elevations by foundation plant materials. Gates need not be screened. d. Underground Parking. Parking that is fully underground and below the street grade may extend from lot line to lot line. [image omitted; see the official code] On Activity Class C streets, only the ground floor or above grade structured parking must be buffered with active uses. [image omitted; see the official code] On Activity Class C streets, most surface parking must be behind a building, but some may be behind landscaping. 4. Sites with Multiple Frontages. Building frontage along the street(s) of highest pedestrian importance, as determined by the Review Authority, shall comply with applicable subsections 1, 2, and/or 3 above. Along the street of lowest pedestrian importance, frontages may provide reduced buffering if a satisfactory pedestrian environment is maintained, as determined by the Review Authority. H. Parking Access and Entrance Design. The following standards shall apply to vehicular access to off-street parking areas: 1. Access. a. Lots with Alley Access. Service areas shall be accessed through the alley, and access from a street shall not be permitted. For the redevelopment of sites with existing curb cut access from a street, the access shall be taken from the alley and the curb cut on the street shall be removed. b. Corner Lots without Alley Access. Service areas shall be accessed from the street with the lowest Activity Classification per Figure 15-1501. If all adjacent streets have the same Activity Classification, the parking and service areas shall be accessed from the street with the least potential for pedestrian activity as determined by the Review Authority. c. Interior Lots without Alley Access. Service areas may be accessed from the street. 2. Entrance Design. Private parking garage entrance openings shall be composed as an integral part of the building facade and shall be designed as doorways secured by gates or doors and scaled in proportion to the overall form of the building. I. On-Site Open Space. 1. Minimum Open Space Required. On-site open space shall be required for projects with more than four dwelling units. The minimum amount of on-site open space required shall be based on the size of the lot, as shown in Table 15-1503. This requirement may be met through a combination of private open space, common open space, or public plazas as follows: a. Private Open Space Requirements. Private open spaces are those which are attached to a dwelling unit and are available only for the private use of the residents of the dwelling unit, such as balconies, porches, and patios. No fewer than 50 percent of the dwelling units on a site shall have a private open space. The following standards shall apply to private open space: i. The minimum dimension of any private open space shall be five feet. ii. The minimum area of any private open space shall be 50 square feet. iii. When located within 30 feet of a public street and located on the ground floor, private open spaces shall follow the requirements for Porches as put forth in Table 15-1505-E-2. iv. When located within 30 feet of a public street and located above the ground floor, private open spaces shall follow the requirements for Balconies as put forth in Table 15-1505-F. b. Common Open Space Requirements. Common open spaces are those which are available for active or passive use by all tenants, but use by the general public may be restricted. To the extent that common open space is provided, the following standards shall apply: i. The minimum dimension of any common open space shall be 20 feet. ii. The minimum area of any common open space shall be 1,000 square feet. The calculation of the common open space area shall exclude structures which are unusable as open space, but shall include structures that enhance its usability, such as swimming pools, changing facilities, fountains, planters, benches, and landscaping. iii. For sites greater than one acre in size, a minimum of 40 percent of the required common open space shall be developed with gardens, play fields, hard-surfaced game courts, recreation rooms, swimming pools, or other features designed for the active recreational use of residents of the development. iv. Common open space may be located at grade, on rooftops, on top of parking podiums, or any other such location that is accessible to tenants. Common open space may not be located within required setbacks or parking areas. [image omitted; see the official code] FIGURE 15-1504-I.1.B: MINIMUM REQUIRED COMMON OPEN SPACE DIMENSION c. Public Plaza Requirements. Public plazas are those which are available for use by the general public, as well as tenants of the project. To the extent that public plazas are provided, the following standards shall apply: i. The minimum dimension of any public plaza shall be 20 feet. ii. The minimum area of any public plaza shall be 500 square feet. The calculation of the public plaza area shall exclude structures which are unusable as open space, but shall include structures that enhance its usability, such as fountains, planters, benches, and landscaping. iii. Public plazas shall include benches or other seating, and paving shall be of high-quality materials. Amenities provided shall enhance the comfort, aesthetics, or usability of the space and include, but not be limited to, trees and other landscaping, shade structures, drinking fountains, water features, public art, or performance areas. Landscaping or other aspects of the design shall not discourage the use of the space by the general public, except in conjunction with an outdoor dining area for an adjacent restaurant or other Eating and Drinking Establishment. iv. Public plazas shall be fully accessible from the public right-of-way, shall be located in front of project buildings and shall not be located where public views into the space are obstructed by buildings or other structures. v. Public plazas may be located within required front setbacks. vi. A public access easement shall be provided for the space. vii. Building walls and façades which face a Public Plaza shall be regulated in the same manner as a street-facing façade. Permitted uses along the Public Plaza frontage shall be based on the Activity Classification of the nearest street. [image omitted; see the official code] FIGURE 15-1504-I.1.C: MINIMUM REQUIRED PUBLIC PLAZA DIMENSION 2. Minimum Open Space Reduction. The minimum amount of open space required shall be reduced by 25 percent in the following circumstances: a. Any portion of the lot is located within 400 feet of a transit stop with regular, scheduled service during the weekday hours of 7:00 a.m. to 9:00 a.m. and 5:00 p.m. to 7:00 p.m. b. There is a public park within 400 feet of the site, and i. Said park is located on the same side of the street and provides an improved pedestrian path to and from the site; or ii. The public park is across a local street and the site provides an improved pedestrian path to and from the site. c. The parcel is 15,000 square feet or less in area. J. Pedestrian Access. On-site pedestrian circulation and access must be provided according to the California Building Code and the following standards. Along all public streets, public plazas, and parks, pedestrian entrances from the public sidewalk into structures and/or the site shall be provided as follows: 1. Residential Unit Sidewalk Connections. Direct entrances from the sidewalk into individual ground-floor dwelling units which are adjacent to streets shall be provided at a rate of no less than one per 50 feet of linear street frontage. Such entrances shall be accessed through a permitted frontage per Table 15-1505-E-2. 2. Commercial Sidewalk Connections. Direct entrances from the sidewalk into ground-floor commercial establishments which are adjacent to streets shall be provided at a rate of no less than one per 50 feet of linear street frontage. When establishments with a greater length occupy a site, they shall be set back and wrapped with smaller spaces that will satisfy this requirement. See Figure 15-1504-J.1.c. 3. Common Area Sidewalk Connections. Residential and commercial areas which aren't directly accessed from the sidewalk as put forth in items 1 and 2 above shall be accessed by a common entrance from the sidewalk into lobbies or internal pedestrian paths. 4. Emergency exits, entrances into utility rooms, and other such features shall not count toward to the satisfaction of this requirement. 5. Pedestrian Access Design. a. If there is a yard between the sidewalk and the building, a paved path six feet in width shall be provided from the public sidewalk to the entrance. b. Entry doors shall not swing out to the sidewalk unless the door when fully open does not encroach into the sidewalk. c. Handrails or other such improvements shall not block visibility of the building entry or direct access from the sidewalk. [image omitted; see the official code] Orienting pedestrian entrances to the sidewalk is an essential ingredient of Downtown revitalization. [image omitted; see the official code] Direct entrances into individual ground-floor residential units ensure pedestrian comfort on less active streets. [image omitted; see the official code] FIGURE 1504-J.1.C: WRAPPING OF LARGE USES [image omitted; see the official code] Retail uses along the ground floor of the Warnor's Theater conceal the large, windowless auditorium. [image omitted; see the official code] Large department stores can be wrapped with smaller shops, as with the Macy's at River Park. K. Sidewalk and Public Frontage Standards. 1. Applicability. a. Notwithstanding Chapter 13, Section 208 of the Municipal Code, all projects shall be required to bring adjacent sidewalk conditions into conformance with the standards of this section, subject to the following exceptions: i. Applications for signs only. ii. Additions, remodels, or tenant improvements of less than 50 percent of the current value of the property. iii. Accessory structures less than 1,000 square feet in size. b. New development that is below the thresholds noted in item 'a', above, shall replace and maintain missing and/or dead street trees and any other missing or dead landscaping in the public frontage (public right-of-way). c. In no case shall an existing sidewalk, or portion thereof, be vacated, even if the minimum width required in the applicable Public Frontage Type is less than the existing sidewalk. d. When a public frontage of the subject property is improved to meet the applicable requirements of this section and the adjacent property does not physically align with the new improvement, the improvement shall be designed to the satisfaction of the Review Authority to result in a safe and smooth transition between properties. 2. Public Frontage Types. Required sidewalks shall be provided and designed as follows: [image omitted; see the official code] Public frontage is an indispensable component of comfortable, safe, and convenient pedestrian experience. [image omitted; see the official code] Appealing public frontage enhances commercial viability, sociability, and civic pride. TABLE 15-1504-K-2: PUBLIC FRONTAGE TYPES—DOWNTOWN DISTRICTS A. Sidewalk with Tree Wells 1. Applicable Locations: All locations except those specified in subsections B and C below. | [image omitted; see the official code] 2. Basic Standards ⓐ Total Sidewalk Width: 12 ft. min. ⓑ Well Width: 5 ft. min. ⓒ Well Depth: 5 ft. min. ⓓ Clear Walkway Width: 7 ft. min. ⓔ Tree Spacing: 20 ft. min, 40 ft. max. B. In-Street Tree Planter 1. Applicable Locations: Areas with narrow sidewalk conditions. | [image omitted; see the official code] 2. Basic Standards ⓐ Total Sidewalk Width: Less than 12 ft. ⓑ Well Width: 6 ft. min. ⓒ Well Depth: 4 ft. min. ⓓ Tree Spacing: between every two parallel parking spaces or between every five angled or perpendicular spaces (approximately 40 to 50 feet apart) 3. Other Standards a. Where the existing sidewalk is located immediately adjacent to the curb and where the distance between the curb and the R.O.W. line is too narrow to accommodate both a sidewalk and a parkway strip or tree well, tree planters may be introduced in the parking lane to maximize pedestrian space while providing shade and greenery as determined by the Review Authority. b. Planters should be placed outside of the gutter to avoid interference with drainage. Planter dimensions shall be least 6 feet by 4 feet with curbs provided on all four sides of the planter, although the side facing the sidewalk may be curbless to permit stormwater to drain into the planter. c. Planters must contain street trees and may be landscaped or covered with metal tree grates. C. Raised Sidewalk 1. Applicable Locations: Projects with ground floor commercial uses on sites which must be raised due to potential flooding issues. | [image omitted; see the official code] 2. Basic Standards ⓐ Total Sidewalk Width: 12 ft. min. ⓑ Lower Walkway/Well Width: 5 ft. min. ⓒ Well Depth: 5 ft. min. ⓓ Raised Walkway Width: 7 ft. min. ⓔ Tree Spacing: 20 ft. min, 40 ft. max. 3. Other Standards a. The walkway nearest to the building shall be raised to match the level of the finished floor of the first story so that it is flush with entrances into commercial spaces. b. The upper walkway shall be buffered from the lower walkway with a curb, hedge, raised planter, or other method as determined by the Review Authority. c. Steps from the lower walkway to the upper walkway shall be provided every 100 feet or less as determined by the Review Authority. d. At block corners the raised walkway shall, via a straight ramp, drop to meet the level of the lower walkway. e. This sidewalk design shall only be used if the Fresno Metropolitan Flood Control District or other public agency mandates that the lot be raised above the existing sidewalk level due to potential flooding issues and when authorized by the Review Authority. [image omitted; see the official code] A raised sidewalk can allow for proper urban retail frontage, while still mitigating flood risk. [image omitted; see the official code] In-street tree planters can provide shade and beauty while maximizing the pedestrian walkway in areas with space constraints. 3. Sidewalk Width. Sidewalks shall be no less than 12 feet in width. If the current distance between the right-of-way boundary and the face of the adjacent curb is less than 12 feet, the method by which this requirement shall be satisfied shall be determined by the Review Authority. The available methods shall be as follows: a. Set Back. The building may be set back from the right-of-way boundary the distance that is necessary to achieve the required sidewalk width. The portion of the sidewalk which lies within the private parcel shall be guaranteed for public access by the enactment of a pedestrian easement. b. Reconstruction. The applicant may demolish and reconstruct the sidewalk for the entirety of the block frontage(s) which the project occupies to the extent necessary to satisfy the requirements of this section. c. Parklet. The sidewalk may be expanded into the roadway by a metal or wood deck which does not interfere with the drainage of the street. In such instances the applicant shall enter into an encroachment agreement with the City in which the applicant accepts full responsibility for the maintenance and repair of the parklet, as well as providing the indemnification and insurance as required by the City's Risk Manager. The design of the parklet shall be attractive and compatible with its surroundings, as determined by the Director. d. Width Exemption. For unusually challenging site conditions, or in instances in which the existing building and sidewalk pattern warrants it, the Director may exempt the applicant providing the full sidewalk width required above. Examples include instances in which setting the building back would cause a break in a uniform row of aligned facades, and moving the curb or adding a parklet would interfere with important roadway improvements such as a bike lane. In such instances all other sidewalk requirements, such as for trees and lighting, shall be met. When a narrow sidewalk is exempted from the width requirement, the standards of the In-Street Tree Planter Public Frontage Type shall be followed if the design of the adjacent roadway permits, at the discretion of the Director. L. Block, Street, and Alley Standards. 1. Maximum Block Length. No block shall exceed 400 feet in length. For the purposes of this section, block length shall be measured along a street frontage from an intersecting street to the next intersecting street. Such measurements shall not begin nor end at an alley. 2. Design of New and Modified Streets. New streets and modifications to existing streets shall be designed in conformance with the Fulton Corridor Specific Plan (FCSP). Designs may deviate from the FCSP if necessitated by site constraints, at the discretion of the Director. 3. Vacation of Existing Streets and Alleys. Existing streets and alleys shall not be removed or vacated, except for street or alley fragments that no longer connect to adjacent streets or provide access to adjacent properties. Such fragments may be vacated with Director approval, provided that such vacation will not result in a block which exceeds 400 feet in length.
(Added Ord. 2016-43, § 2, eff. 12-9-16; Am. Ord. 2017-33, § 9, eff. 7-30-17).
Ask a question about Fresno law
Corpus searches the Fresno sections it holds and shows the ones that match, with their citations. Free, no sign-in.
