§ 5.10.2 — ESTABLISHING AN NPZ
Tucson Code (General Ordinances) (2026 S-151: current through August 18, 2026) · Tucson Unified Development Code § 5.10.2
Corpus is an independent public-information project, not the official City of Tucson website. Stable reference: corpuslaw.us/code/38a03f9e-ec33-4131-87d5-1290e12f5fa3
5.10.2. ESTABLISHING AN NPZ
A. Establishment or Dissolution of, or Amendment to a Neighborhood Preservation Zone Zone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. 1. An NPZ is initiated by the Mayor and Council at their sole discretion. 2. An NPZ is established, amended, or dissolved by the Mayor and Council by ordinance in accordance with Section 3.5, Rezoning (Change of Zoning) Procedure. B. Eligibility and Applicability 1. The NPZ is an overlay zone Zone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. superimposed over the development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. standards of the underlying zoning. The land uses Land Use A description of the existing or proposed occupancy or utilization of land that include the principal use and accessory uses. permitted within the NPZ district are those permitted by the underlying zoning; 2. Neighborhoods listed on the National Register of Historic Districts, include a National Register Historic District, or are eligible to be listed on the National Register of Historic Districts and have completed a National Historic District Nomination or Eligibility Assessment application are eligible for the NPZ; and, 3. An NPZ applies to residential zones Zone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. only. C. Design Manual 1. The Design Manual is created upon initiation of the NPZ district and shall, at a minimum contain the following: a. NPZ District Neighborhood Character Neighborhood Character The combination of various defining characteristics of Contributing Properties and existing development within a Development Zone that creates and conveys the historic significance and visual character of a neighborhood. These characteristics include scale and proportion, architectural style and detail, open spaces, spatial relationships, and landscaping. (1) Identification of Contributing Properties Contributing Property A property within a Historic Preservation Zone, Neighborhood Preservation Zone, or National Register Historic District that contributes to the historic significance and visual character of the zone or district, and has sufficient integrity to convey that significance and those visual character defining features in terms of location, design, setting, material, workmanship, character, or association. Contributing Properties are historic sites or nonhistoric compatible properties. within the NPZ District; (2) Identification of the defining characteristics of the NPZ district. Such identification may include excerpts or references to those portions of the National Register nomination or eligibility document that summarize the defining characteristics of the district District A zone that has zoning options to encourage transit-oriented development or has specific urban design standards within the City. Examples include the Rio Nuevo District, the Downtown Area Infill Incentive District. A “district” is also referred to as a zoning district. ; and, (3) Illustrations and narratives describing (1) and (2) above. b. NPZ District Map The Design Manual shall include a map of the boundaries of the NPZ district showing the Contributing Properties Contributing Property A property within a Historic Preservation Zone, Neighborhood Preservation Zone, or National Register Historic District that contributes to the historic significance and visual character of the zone or district, and has sufficient integrity to convey that significance and those visual character defining features in terms of location, design, setting, material, workmanship, character, or association. Contributing Properties are historic sites or nonhistoric compatible properties. and the boundaries of the National Register District or area eligible for a National Register District. c. Compatibility Compatibility/Compatible Visual consistency of development by mirroring prevailing dimensions, spatial relationships, and architectural and design characteristics of the neighborhood overall and the Contributing Properties within the Development Zone. The term “compatible” does not mean “repetition or copy of” or “identical to” existing structures within the neighborhood. Compatibility is achieved when a development is designed in a manner that blends in with the character of structures in the Development Zone. Review Standards The Compatibility Compatibility/Compatible Visual consistency of development by mirroring prevailing dimensions, spatial relationships, and architectural and design characteristics of the neighborhood overall and the Contributing Properties within the Development Zone. The term “compatible” does not mean “repetition or copy of” or “identical to” existing structures within the neighborhood. Compatibility is achieved when a development is designed in a manner that blends in with the character of structures in the Development Zone. Review Standards determine a proposed development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. ’s compatibility Compatibility/Compatible Visual consistency of development by mirroring prevailing dimensions, spatial relationships, and architectural and design characteristics of the neighborhood overall and the Contributing Properties within the Development Zone. The term “compatible” does not mean “repetition or copy of” or “identical to” existing structures within the neighborhood. Compatibility is achieved when a development is designed in a manner that blends in with the character of structures in the Development Zone. with the contributing properties Contributing Property A property within a Historic Preservation Zone, Neighborhood Preservation Zone, or National Register Historic District that contributes to the historic significance and visual character of the zone or district, and has sufficient integrity to convey that significance and those visual character defining features in terms of location, design, setting, material, workmanship, character, or association. Contributing Properties are historic sites or nonhistoric compatible properties. in the development zone Development Zone As used in Section 5.8, “H” Historic Preservation Zone (HPZ), Section 5.10, Neighborhood Preservation Zone (NPZ), and, Section 5.11, Rio Nuevo District (RND), a certain designated area adjacent to the lot to be developed. Public and institutional structures within the development zone is not considered to be part of the development zone when evaluating proposed development on an adjacent property, except for public and institutional structures on or eligible for inclusion on the National Register of Historic Places. The development zone is determined as follows: (See Illustrations below.) • Where the subject lot is an interior lot, the development zone includes that lot, all lots on either side of that lot and fronting on the same street in the same block, and all those lots on the opposite side of that street, except such portions of the development zone that fall outside the boundary of the HPZ, NPZ, or the RND. • Where the subject lot is a corner lot, the development zone includes that lot, the corner lot diagonally opposite that lot, all lots fronting on the same two streets in the same block, and all lots on the opposite sides of those streets, except such portions of the development zone that fall outside the boundary of the HPZ, NPZ, or the RND. • Where the subject lot is located adjacent to a historic zone boundary, the development zone includes that lot, all lots located within the same block, and those lots facing the same street as the subject lot within one block in either direction, except such portions of the zone that fall outside the boundary of the HPZ, NPZ, or the RND. . The basis for the Compatibility Compatibility/Compatible Visual consistency of development by mirroring prevailing dimensions, spatial relationships, and architectural and design characteristics of the neighborhood overall and the Contributing Properties within the Development Zone. The term “compatible” does not mean “repetition or copy of” or “identical to” existing structures within the neighborhood. Compatibility is achieved when a development is designed in a manner that blends in with the character of structures in the Development Zone. Review Standards is the defining characteristics of the National Register Historic District as identified in the district District A zone that has zoning options to encourage transit-oriented development or has specific urban design standards within the City. Examples include the Rio Nuevo District, the Downtown Area Infill Incentive District. A “district” is also referred to as a zoning district. ’s nomination or eligibility document. A description and examples of each of the following elements shall be provided in the Design Manual: (1) Scale and proportion Proportion The relationship between the width and height of a building’s front facade, windows, and doors. , such as height, bulk and massing, and number of stories; (2) Architectural style and detail, such as roof types, projections and recessions (e.g., porches, awnings, overhangs, steps, and entrances), window sizes and spacing, materials, and surface texture and colors; (3) Spatial relationships and site utilization Site Utilization The spacing between the sides of buildings. , such as spacing between adjacent Adjacent Two or more parcels Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. or lots Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. sharing a common boundary or separated by an alley Alley Alleys are public ways used for the placement of utilities, refuse collection, or similar public services, and under certain circumstances as provided in the UDC, access to individual properties. or other right-of-way Right-of-Way An area reserved for a public or private use, such as, but not limited to, street or alley rights-of-way and utility easements. 20 feet or less in width. Parcels Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. or lots Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. having only a common corner are considered adjacent. Within the Infill Incentive District District A zone that has zoning options to encourage transit-oriented development or has specific urban design standards within the City. Examples include the Rio Nuevo District, the Downtown Area Infill Incentive District. A “district” is also referred to as a zoning district. , Optional Zoning Sub-Districts, Areas and Sub-Areas, the term "adjacent" or "adjacency" means: A. Two or more parcels Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. or lots Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. sharing a common boundary or separated by an ally Alley Alleys are public ways used for the placement of utilities, refuse collection, or similar public services, and under certain circumstances as provided in the UDC, access to individual properties. or a local Local Street A street that primarily serves as access to a residence or other abutting property. or arterial street Arterial Street A street identified as an arterial or Interstate Route on the Major Streets and Routes (MS&R) Plan. 30 feet or less in width. Parcels Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. or lots Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. having only a common corner are also considered adjacent. B. Where the development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. parcel is an interior parcel Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. , adjacent lots Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. includes all residential lots Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. or development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. on either side of the development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. parcel Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. , those lots Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. fronting on the same street Street Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. in the same block Block A unit of land bounded by streets or by a combination of streets and public lands, railroad rights-of-way, watercourses, or other barriers to the continuity of the unit of land. A block may be comprised of one or more lots. A block made up of one lot may also be referred to as a lot or parcel. as the development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. parcel Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. , and all those lots Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. on the opposite side of that street Street Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. (See Figure, "Interior Lot Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. "); C. Where the development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. parcel Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. is a corner lot Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. , the term "adjacent" includes all the residential corner lots Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. or developments Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. diagonally opposite the development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. parcel Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. , fronting on the same two streets Street Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. in the same block Block A unit of land bounded by streets or by a combination of streets and public lands, railroad rights-of-way, watercourses, or other barriers to the continuity of the unit of land. A block may be comprised of one or more lots. A block made up of one lot may also be referred to as a lot or parcel. , and on the opposite sides of those streets Street Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. as shown in the diagram below (See Figure, "Corner Lot Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. "); D. Where the development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. parcel Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. is adjacent to an HPZ, the term "adjacent" includes all lots Lot A tract of land bounded on all sides by property lines, of sufficient size to meet minimum zoning standards, with legal access to a public street. across the street Street Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. and diagonally across from the development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. parcel Parcel The same as “lot.” The term “parcel” is generally listed to describe a piece of property recorded as a division of land by a metes and bounds description and may or may not be a part of a subdivision plat. In a project where a division of land is proposed, each proposed division is considered a lot for the purpose of applying the requirements of the zoning ordinance. . buildings Building A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. , front and rear side setbacks Setback The distance from a set point and is frequently used interchangeably with the term “perimeter yard.” Setbacks may also pertain to drainage-related or other setbacks. , open spaces Open Space Open space is the aggregate of “natural undisturbed open space (NUOS),” “natural open space” and “functional open space.” , attachments (e.g., carports Carport A building that does not have walls on two or more sides and is designed for the parking of one or more motor vehicles. and garages Garage A building enclosed with walls or doors on three or more sides used for the parking of one or more motor vehicles. ), and outbuildings; and, (4) Landscaping Landscaping An exterior improvement of a site in accordance with an approved landscape plan and approved landscape methods, materials, and maintenance. . Landscaping Landscaping An exterior improvement of a site in accordance with an approved landscape plan and approved landscape methods, materials, and maintenance. shall only be reviewed for compatibility Compatibility/Compatible Visual consistency of development by mirroring prevailing dimensions, spatial relationships, and architectural and design characteristics of the neighborhood overall and the Contributing Properties within the Development Zone. The term “compatible” does not mean “repetition or copy of” or “identical to” existing structures within the neighborhood. Compatibility is achieved when a development is designed in a manner that blends in with the character of structures in the Development Zone. when a project Project A development, consisting of one or more contiguous lots, planned and constructed to function as a single entity, utilizing common or shared facilities, structures, parking, and vehicular and pedestrian access. proposes a comprehensive change to the streetscape such as the construction of a new residential unit. d. Privacy Mitigation Mitigation Methods used to alleviate or compensate for the negative impact of development on healthy Protected Native Plants. Measures The Design Manual shall recommend specific privacy mitigation Mitigation Methods used to alleviate or compensate for the negative impact of development on healthy Protected Native Plants. measures to be considered in a NPZ Design Review in accordance with Section 5.10.3.A.2. Examples of privacy mitigation Mitigation Methods used to alleviate or compensate for the negative impact of development on healthy Protected Native Plants. include vegetative or other screening or siting elements, walls, siting of buildings Building A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. or windows, and eliminating balconies or similar features to reduce views towards the existing dwellings. e. Other Standards Dimensional, spatial, and access standards, if adopted by Mayor and Council as mandatory in accordance with Section 5.10.2.C.2, shall be included in the Design Manual. 2. Dimensional, Spatial, and Access Standards The Design Manual may contain dimensional, spatial, or access standards, subject to the following: a. The dimensional, spatial, and access standards may differ from the standards in Article 6 and Article 7 of the UDC Unified Development Code (UDC) Chapter 23B of the Tucson Code as adopted by the Mayor and Council establishing zoning regulations governing the use, placement, spacing, and size of land and structures within the corporate limits of the City. Such regulations are applied on individual properties through the use of zoning districts. The boundaries of these districts are depicted on the adopted City Zoning Maps. For the purposes of convenience and ease of use, the UDC is also published as a separate book from the Tucson Code. . Such standards may be more or less restrictive than those of the underlying zone Zone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. provided they comply with the following: (1) Do not create a nuisance Nuisance A condition or use on the property that endangers life or health, gives offense to the senses, or obstructs the reasonable and comfortable use of other property, or any combination of these effects. or intrude on the privacy of adjoining Adjoining Same as abutting. Abutting Having a common boundary. Parcels or lots having only a common corner are not considered abutting. or surrounding properties; (2) Create a more historically compatible Compatible To be in agreement with or to fit in architecturally with surrounding development. Also, to not visually contradict a street scene, view, or adjacent development. setting, accommodate energy efficiency or, ensure enhanced resource conservation greater than current standards; and, (3) In the case of alley Alley Alleys are public ways used for the placement of utilities, refuse collection, or similar public services, and under certain circumstances as provided in the UDC, access to individual properties. access standards, specify mitigation Mitigation Methods used to alleviate or compensate for the negative impact of development on healthy Protected Native Plants. measures to ensure safe access. b. The Mayor and Council may adopt dimensional, spatial, and access standards as mandatory requirements upon a finding by the Director Director The chief executive officer of a City department. of PDSD that the proposed standard complies with this section. c. Dimensional, spatial, and access standards not adopted as mandatory requirements shall be advisory for purposes of a compatibility Compatibility/Compatible Visual consistency of development by mirroring prevailing dimensions, spatial relationships, and architectural and design characteristics of the neighborhood overall and the Contributing Properties within the Development Zone. The term “compatible” does not mean “repetition or copy of” or “identical to” existing structures within the neighborhood. Compatibility is achieved when a development is designed in a manner that blends in with the character of structures in the Development Zone. review. D. Districts Established 1. NPZ districts are established upon adoption of a rezoning ordinance for a neighborhood. The Design Manual created in accordance with Section 5.10.2.C is a condition of the NPZ district. 2. Adopted NPZ districts shall use the following format: “NPZ-1" - NAME OF DISTRICT - Adopted on XXX, by Ordinance No. XXX. E. Zoning Maps Zoning Maps Same as City Zoning Maps. City Zoning Maps A set of maps that is part of the Unified Development Code (UDC) that depicts all zoning boundaries delineating the zoning classifications applicable to all property within the City limits. To identify each of the NPZ districts on the City of Tucson Zoning Maps Zoning Maps Same as City Zoning Maps. City Zoning Maps A set of maps that is part of the Unified Development Code (UDC) that depicts all zoning boundaries delineating the zoning classifications applicable to all property within the City limits. , the preface “N” is added to the assigned residential zoning designation, i.e., R-1 becomes NR-1.
Ask a question about Tucson law
Corpus searches the Tucson sections it holds and shows the ones that match, with their citations. Free, no sign-in.
