For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 5.12.9 — GREATER INFILL INCENTIVE SUBDISTRICT (GIIS)

Tucson Code (General Ordinances) (2026 S-151: current through August 18, 2026) · Tucson Unified Development Code § 5.12.9

Corpus is an independent public-information project, not the official City of Tucson website. Stable reference: corpuslaw.us/code/3a3d03cf-ae82-4c4f-89af-2b69c54ec3b6

5.12.9. GREATER INFILL INCENTIVE SUBDISTRICT (GIIS)

A. GIIS Land Uses Permitted land uses in the GIIS are determined by Section 5.12.8.A. B. Modifications of Underlying Development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. Standards Standards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval. Except as provided in Subsection C below, the requirements in the following sections of the UDC may be modified up to 25 percent of the dimension amount permitted by the underlying zoning: Article 6, Dimensional Standards and Measurements; Section 7.4, Motor Vehicle & Bicycle Parking; Section 7.5, Off- Street Loading; Section 7.6, Landscaping and Screening. Section 7.7, Native Plant Preservation may not be modified. C. Exceptions The following sections of the UDC may be modified in excess of 25 percent to the extent specified below upon findings by the PDSD Director that the modification is consistent with Section 5.12.1, Purpose. 1. Article 6, Dimensional Standards and Measurements a. Building Height Building Height Same as Structure Height. Structure Height The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height. (1) For all development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. other than residential uses in the underlying I-1 and I-2 zones Zone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. , building height Building Height Same as Structure Height. Structure Height The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height. may be increased up to 60 feet unless the current zoning allows a greater height or where the IID Plan’s Development Transition Standards as provided in Section 5.12.8.B require less. (2) Building height Building Height Same as Structure Height. Structure Height The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height. of residential uses in the underlying I-1 and I-2 zones Zone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. , shall follow building height Building Height Same as Structure Height. Structure Height The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height. requirements of the R-3 zone Zone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. district, and may be modified in accordance with Section 5.12.9.B. (3) Exception: affordable housing projects Project A development, consisting of one or more contiguous lots, planned and constructed to function as a single entity, utilizing common or shared facilities, structures, parking, and vehicular and pedestrian access. are governed by the standards of UDC Section 5.12.8.H. b. Street Street Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. Perimeter Yard Perimeter yard Perimeter Yard A setback area to separate buildings from adjacent property or streets. requirements may be reduced or waived if the PDSD Director determines that the request is consistent with the Major Streets and Route Plan Major Streets and Routes (MS&R) Plan The plan adopted by the Mayor and Council to implement the circulation element of the General Plan that identifies the general location and size of existing and proposed freeways, arterial and collector streets, future right-of-way lines, typical intersections, and Gateway and Scenic Routes. . The Director of the Department of Transportation and Mobility, may modify the Major Streets and Routes Major Streets and Routes Those freeways, arterials, and collector streets identified in the Major Streets and Routes Plan. setback if there is adequate sight visibility, no traffic safety issue is created, the reduction complies with the standards Standards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval. of Section 5.12.8.B, and the setback Setback The distance from a set point and is frequently used interchangeably with the term “perimeter yard.” Setbacks may also pertain to drainage-related or other setbacks. does not create a future roadway expansion problem. This provision may apply to Major Streets and Routes Major Streets and Routes Those freeways, arterials, and collector streets identified in the Major Streets and Routes Plan. setbacks in the DCS and DLS. c. Residential Density Density The number of residential units per acre. (1) For all development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. other than residential in the underlying I-1 and I-2 zones Zone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. , no residential density Density The number of residential units per acre. standards Standards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval. apply. (2) Residential density Density The number of residential units per acre. calculations for residential uses in the underlying I-1 and I-2 zones Zone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. , shall follow density Density The number of residential units per acre. requirements of the R-3 zone district. (3) Exception: affordable housing projects are governed by the standards Standards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval. of UDC Section 5.12.8.H. 2. Section 7.4, Motor Vehicle and Bicycle Parking a. Parking Parking as required by Section 7.4, Motor Vehicle and Bicycle Parking, may be reduced up to 25 percent. Parking may be decreased by more than 25 percent per a written agreement with the Park Tucson, or in accordance with Section 5.12.6.M, IID Parking Plan, if the analysis and findings show the proposed parking is adequate. b. Accessible Parking and Bicycle Facilities Bicycle Parking Facility A structure that provides for the short- or long-term placement of bicycles. (1) The number and location of accessible parking spaces required by the City's City Same as City of Tucson. adopted Building Code shall not be reduced or eliminated and shall be based on the number of motor vehicle parking spaces required prior to any modification. (2) Bicycle facilities Bicycle Parking Facility A structure that provides for the short- or long-term placement of bicycles. may not be reduced or eliminated and must be based on the number of bicycle spaces Bicycle Parking Space An area designated for the use of an individual bicycle. required by Section 7.4.8 for the use. c. Location Parking may be provided by any one of the following options or by a combination of the following options: (1) On-site; (2) Off-site within one-fourth of a mile of the project site Project Site In general application, the area of the project. A site may be any number of contiguous lots, separated by no more than 600 feet, or it may be one lot. As applicable in Section 5.6, Airport Environs Zone (AEZ), the land area designated for development and managed as a single entity, exclusive of any abutting public right-of-way. The project site utilizes common facilities such as parking, structures, and vehicular and pedestrian access. Noncontiguous lots shall, at a minimum, be connected by pedestrian facilities. through a shared parking agreement with the City City Same as City of Tucson. ; (3) With the approval of the Department of Transportation, proposals for non-residential uses may provide up to five on-street On-Street Parking The storage space for an automobile or other motorized vehicle that is located within the street right-of-way. spaces on a collector or arterial street Arterial Street A street identified as an arterial or Interstate Route on the Major Streets and Routes (MS&R) Plan. where parking is permitted. 3. Section 7.5, Off-Street Loading Off-street Off-Street To be within property boundaries and not within a right-of-way, such as a street or alley. loading zone Zone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. standards Standards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval. may be reduced or waived if PDSD and the Department of Transportation determine that no traffic safety issue is created. 4. Solid Waste Collection On-site refuse collection container standards Standards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval. governing access, type, and location may be modified if the Environmental Services Department determines that no public health or traffic safety issue is created. 5. Section 7.6, Landscaping and Screening a. Section 7.7, Native Plant Preservation may not be modified. b. Except as required by Section 5.12.8.B, Development Transition Standards, a complete or partial exception to Section 7.6, Landscaping and Screening Standards, may be granted if shade is provided for pedestrians and customers, such as along sidewalks, pedestrian circulation paths, and outdoor patios, in accordance with Section 5.12.6.A.2. The landscaping requirement may also be waived by the PDSD Director based on a written finding that the waiver is necessary to preserve the prevailing setback. c. Any one or more of the following types of landscaping and improvements Improvements Any on-site or off-site improvements, such as, but not limited to, refuse container enclosures, streets, sidewalks, sewer, water, and electric utility installations, drainage and flood control facilities, monuments or other similar facilities or developments for which the City of Tucson may ultimately assume responsibility for maintenance and operation, or landscaping, screening, or other site improvements required by the Tucson Unified Development Code (UDC) or other appropriate City code. may be used to comply with this section: (1) Existing landscaping; (2) Shade trees in the right-of-way Right-of-Way An area reserved for a public or private use, such as, but not limited to, street or alley rights-of-way and utility easements. ; (3) Green walls or green roofs; and/or (4) Shade structures Structure A physical element constructed or erected with a fixed location on the ground or attached to another physical element having a fixed location at, below, or above grade. Structures include such elements as, but are not limited to, buildings, paved areas, walls, fences, posts, and patios. , such as awnings. 6. Pedestrian Access Alternative pedestrian access that creates connectivity between public entrances to the project Project A development, consisting of one or more contiguous lots, planned and constructed to function as a single entity, utilizing common or shared facilities, structures, parking, and vehicular and pedestrian access. and abutting Abutting Having a common boundary. Parcels or lots having only a common corner are not considered abutting. sidewalks may be allowed as long as no safety hazard is created. All pedestrian access shall conform to the accessibility standards Standards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval. of the City's City Same as City of Tucson. adopted Building Code. (Am. Ord. 11246, 2/18/2015; Am. Ord. 11977, 12/20/2022)

Ask a question about Tucson law

Corpus searches the Tucson sections it holds and shows the ones that match, with their citations. Free, no sign-in.