For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 35.4.012 — Loading and Unloading General Provisions

Code of the City of Glendale, Arizona (Supp. No. 115: codified through Ordinance No. O26-19, adopted April 14, 2026) · Glendale City Code § 35.4.012

Corpus is an independent public-information project, not the official City of Glendale website. Stable reference: corpuslaw.us/code/407ce73d-5232-4cba-9c4e-b2fa5c7c5f7f

35.4.012 - Loading and Unloading General Provisions.

A. Material Loading Areas: Accommodations for loading and unloading are required for all non-residential uses and are subject to the following criteria: 1. Required material loading spaces shall not be part of the spaces used to satisfy off-street parking requirements specified in Table 4.000-2. 2. Loading shall be restricted to the hours of 6:00 a.m. to 9:00 p.m. when located within two hundred (200) feet of any residential use. 3. Off-street truck loading areas shall be located on the same lot on which the building for which they are servicing is located, unless they are under a cooperative arrangement, in which case they may be located on another parcel not more than two hundred (200) feet from the structure for which they are provided. 4. Material loading areas shall be located within rear or side yards only. Loading areas shall be screened from adjacent residential uses and from public view. 5. Loading areas shall be properly graded for drainage, surfaced with concrete or asphalt, and maintained in good condition free of weeds and debris. 6. Lighting facilities shall be placed in such a manner that they neither unreasonably disturb occupants of adjacent residential properties nor interfere with traffic. 7. Loading areas shall be served by entrances and exits so located as to minimize traffic congestion. Such areas shall be accessible from a street, alley or drive aisle connecting with a street or alley, but in no case shall access be shared by residential uses. 8. Required loading space dimensions shall be determined based upon the size of delivery vehicles serving the site. Minimum sizes are as follows: a. Standard freight loading spaces shall be at least sixty-five (65) feet in length and at least twelve (12) feet in width with not less than fifteen (15) feet in vertical clearance, exclusive of drive aisle or similar maneuvering areas. b. Single-unit trucks serving general retail, office uses, and other similar uses associated with incidental loading and unloading needs, alternative loading spaces shall be at least thirty (30) feet in length and at least ten (10) feet in width with not less than fourteen (14) feet in vertical clearance, exclusive of drive aisle or similar maneuvering areas. 9. The minimum number of material loading spaces shall be provided as follows: Table 4.000-3 Material Loading Spaces Gross Floor Area (Aggregate) | Minimum Number of Loading Spaces 5,000 to 30,000 | 1 30,001 to 80,000 | 2 80,001 to 140,000 | 3 140,001 to 200,000 | 4 200,001 to 300,000 | 5 Over 300,000 | 5 + 1 additional loading space for each additional 90,000 square feet 10. Exceptions a. The provisions of this subsubsection shall not apply to uses located in the PR zoning district. b. Exceptions may be granted when a traffic or parking study demonstrates the need for lower loading requirements. B. Passenger Loading Areas: A passenger loading space is the area a vehicle occupies while loading or unloading passengers. 1. The number of spaces needed to satisfy off-street parking requirements specified in Table 4.000-2 may be reduced by five percent (5%) for each passenger loading zone space provided in accordance with Table 4.000-4 up to a maximum of twenty percent (20%). Table 4.000-4 Passenger Loading Spaces Use Category | Number of Loading Spaces/Gross Floor Area (Aggregate) General Commercial Use Category | 1 loading space per 50,000 GFA Office Uses | 1 loading space per 100,000 GFA Industrial Use Category | 1 loading space per 200,000 GFA Public/Semi-Public Use Category | 1 loading space per 50,000 GFA Multiple Residence Uses | 1 loading space per 150 units 2. Passenger loading spaces exceeding the number of spaces identified herein shall not be eligible for a ten percent (10%) parking reduction. 3. To ensure any parking reductions will not result in a shortage of parking spaces needed to support the principal use, the Development Services Director or designee may require the applicant to submit a Parking Justification Study or other information, at the applicant's cost. 4. Vehicular ingress and egress to and from passenger loading spaces shall be by forward motion and consist of a vehicle turnout area so as to not interfere with the circulation of vehicles, pedestrians or bicycles within parking areas. 5. Passenger loading spaces shall be located within fifty (50) feet of the primary entrance to a stand-alone use. In multiple use developments, a centralized passenger loading area may be used that is greater than fifty (50) feet from the primary entrance to a single tenant, provided the area serves multiple tenants and maintains safe pedestrian access to all tenants of the development. 6. A passenger loading space shall be a minimum of twelve (12) feet in width and twenty-five (25) feet in length and shall comply with accessibility requirements.

Ask a question about Glendale law

Corpus searches the Glendale sections it holds and shows the ones that match, with their citations. Free, no sign-in.