§ 65.1 — Establishment of the slope development district
Code of Ordinances of the City of Huntsville, Alabama (Supp. No. 30 (codified through Ord. No. 26-196, adopted March 12, 2026) with enacted ordinances through Ord. No. 26-837 (September 24, 2026) applied from official council minutes and ordinance copies) · Huntsville Code of Ordinances, App. A, art. 65, § 65.1
Corpus is an independent public-information project, not the official City of Huntsville website. Stable reference: corpuslaw.us/code/411d8024-e20f-416a-880b-cea876e488cb
65.1. - Establishment of the slope development district.
The boundaries and designations of the slope development district are hereby established and approved as defined herein and as shown and designated on the official zoning maps of the City of Huntsville, Alabama. 65.1.1. The slope development district boundary has been established at the elevation contour immediately above or below which a 25-foot vertical span of mountainside has a slope of 15 percent or greater and the district is to include those contiguous parts of mountains or hills that exhibit at least 100 feet of relief as measured from the lowest elevation contour that bounds the 15 percent or greater slope to the highest contour of the district as defined herein. In addition, the upper boundary shall be extended 50 feet (horizontal distance) beyond the elevation contour immediately below which a 25-foot vertical span exhibits a slope of 15 percent or greater. 65.1.2. When a lot is divided by the Slope Development District boundary line, the lot shall be considered as lying wholly within the district unless it satisfies the following conditions: (1) That portion of the lot lying within the slope development district shall remain undisturbed and shall have a restriction placed on the final plat requiring that it be retained in its natural state except for hiking trails, and (2) That portion of the lot lying outside the slope development district shall be of sufficient size and shape to meet all the minimum yard setback, lot area, and lot width requirements of the underlying zoning district. If the option is taken to remove a divided lot from the authority of the slope development district regulations, then no part of the divided lot shall be included in the impervious cover calculations for the subdivision of which it is a part. 65.1.3. The slope development district boundary is shown and designated on a 1:4800 scale map (one inch equals 400 feet) having contour intervals of five feet. Slope percentage is calculated perpendicular to contours over a 25-foot vertical span. The boundary is delineated perpendicular to slope on the five-foot contour lines and parallel to slope between contour lines. Local variations in slope that continue for horizontal distances of less than 200 feet parallel to contour lines are not shown by adjustments in the district boundary. 65.1.4. In the event of a discrepancy between the mapped district boundary and the surveyed district boundary, the surveyed boundary line shall prevail, provided the following certification is made part of the slope map submitted for development approval: I, ___________, do hereby certify that I am a licensed land surveyor in Huntsville, Alabama, that I have surveyed the lands embraced within (development name), that the contours shown hereon accurately describe the natural, undisturbed topography of the site existing prior to the development, and that the boundaries of the slope development district as shown hereon have been established in conformance with the provisions of section 65.1.1 of the Huntsville Zoning Ordinance. ________ | ________ Date | Land Surveyor
(Ord. No. 96-159, 4-25-1996)
Ask a question about Huntsville law
Corpus searches the Huntsville sections it holds and shows the ones that match, with their citations. Free, no sign-in.
