For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 25.10.080 — Qualifications for mechanical contractors

Revised Code of the City of Saint Louis, 2020, Annotated (Supp. No. 11: codified through Ordinance No. 72042, enacted October 30, 2025) · St. Louis Revised Code § 25.10.080

Corpus is an independent public-information project, not the official City of St. Louis website. Stable reference: corpuslaw.us/code/4663102a-c6b4-4e83-a3e3-8b5718c93427

25.10.080 - Qualifications for mechanical contractors.

A. Mechanical contractors shall be in responsible charge of the work of person(s) who have served an apprenticeship program covering the work described in Section 25.10.020 certified by the U.S. Department of Labor or who shall have worked as a journeyman performing said work for 5,000 hours in the previous five (5) years, or have equivalent training and experience. Only journeyman pipefitters as defined herein and apprentices working under their supervision shall perform the work described in Section 25.10.020. In addition, mechanical contractors shall comply with the guidelines and requirements of the City of St. Louis relating to equal opportunity in employment. B. Manufacturer representative business entities and their employees engaged in the supply of equipment involving pressure pipe, pressure vessels, fired and unfired, cooling, heating or compressed air which by contract with manufacturers to supply parts, (proprietary) repairs, maintenance, start-up, testing, tuning and replacements shall be certified to perform to the extent that their duties and responsibilities are defined and required by contract with equipment manufacturers. A journeyman status to existing manufacturer trained service personnel shall be granted and apprentice requirements and training shall be approved under the control of manufacturer trained specialists and shall be approved in said manufacturer representative business entities. Any employee of a manufacturer representative business entity upon leaving said business entity shall be required to relicense themselves by a test administered by the section of Mechanical Regulations and Inspection and shall be required to show proof of 5,000 hours experience in the previous five (5) years. C. Manufacturer representative business entities holding the National Board of Boiler and Pressure Vessel Inspectors "R" stamp shall be deemed authorized to perform work on pressure vessels and associated attachments as previously required by City and State Code. Service personnel with certification provided by said business entity shall be licensed as journeymen pipefitters and apprentices as applicable in accordance with this Code.

(1994 C., § 25.10.080; Ord. No. 62579, § 8, 1992.)

Ask a question about St. Louis law

Corpus searches the St. Louis sections it holds and shows the ones that match, with their citations. Free, no sign-in.