Fire safety officer requirements.
San José Municipal Code § 17.82.310
in effect17.82.310 - Fire safety officer requirements.
A. No person shall perform, permit, authorize or allow any hot work on any large or major wood frame building project, after wood framing has commenced, unless a fire safety officer is present on the project site at all times while hot work is being performed.
B. A fire safety officer shall monitor, confirm and document the following:
1. That a fire watch as required by Chapter 33 of the California Fire Code, as adopted in Chapter 17.12 of this Code, or by any similar fire safety code or provision as may be adopted by the city from time to time has been provided during all hot work operations;
2. That storage, use and handling of flammable liquids conforms to all federal, state and local, legal and administrative requirements;
3. That construction debris is promptly removed from the project site;
4. That fire protection equipment, including fire extinguishers, fire hydrants, standpipes, and other fire service connections, are in place and operational, as required by law or specified in the approved construction fire protection plan;
5. That mitigating fire protection barriers are in place on any major wood frame building project, in accordance with this chapter and the construction sequencing requirements of the approved construction fire protection plan;
6. That such other requirements relating to fire safety have been met, as may be specified in this Code, in the regulations adopted pursuant to this chapter, or in the approved construction fire protection plan.
(Ords. 27025, 29808.)
Source: City of San José, Municipal Code (Municode Library, library.municode.com)URL: https://library.municode.com/ca/san_jose/codes/code_of_ordinances?nodeId=TIT17BUCO_CH17.82FISADUCO_PT3SPRE_17.82.310FISAOFREFetched: 11/1/2026
