Requirements and procedures.
Chandler City Code § 39-7
in effect39-7. - Requirements and procedures.
39-7.1 Permits required. No sign shall hereafter be erected, re-erected, constructed or altered except as provided by this chapter. A separate permit shall be required for a sign or signs for each business entity, and/or separate permit shall be required for each group of sign panels on a single supporting structure. Said permits may include structural, electrical or other plan review as determined by Chapter 29 Building Regulations of the City Code.
39-7.2 Exceptions. A sign permit shall not be required for the following signs; however, such signs shall be subject to any and all applicable provisions of the City Code, including this chapter:
A. Signs required under Subsection 39-7.7.
B. Any sign six (6) square feet or less in area not otherwise prohibited or required to obtain a permit by this chapter.
C. Repainting.
D. Temporary signs erected that are associated with a Special Event Permit in accordance with Chapter 32 of this Code.
E. Signs not visible from the public right-of-way or which are not visible from one property to another, except when said signs require a permit as provided by this chapter.
F. Vehicle signs as provided for in Subsection 39-7.8(D).
G. Window signs as provided for in Section 39-9.14.
H. Temporary signs identified in Section 39-10 as not requiring a permit.
I. Seasonal decorations.
J. Normal repair and maintenance of conforming or nonconforming signs that does not exceed fifty (50) percent of the sign's value, as determined by a licensed sign contractor.
K. Government signs: Nothing contained herein shall prevent the erection, construction, and maintenance of official signs of the State of Arizona and the City of Chandler, or other competent public authorities, or the posting of notices required by law.
L. Signs protected by state statutes: Nothing contained herein shall prevent the erection, construction, and maintenance of signs authorized and/or protected by Arizona Revised Statutes.
39-7.3 Permit application and expiration.
A. Application. Applicants may apply for a sign permit or a temporary sign permit by completing and submitting a permit application provided by the Planning Division together with required plans and/or details identified by said application. All plans submitted with the application shall show complete details, to include size, materials, method of support or attachments, name and address of the persons or firm designing said sign and plot plan showing location of sign on the premises. Permit review time frames shall conform to time frames adopted by the City as required by Arizona Revised Statutes which are posted on the City's website. An applicant may appeal a permit denial to the Board of Adjustment within thirty (30) days from the date of denial in accordance with the appeal procedure set forth in Section 35-2503 of the City Code.
B. Revocation of permits for nonuse. If actual work is not commenced under any permit issued under the provisions of this section within one (1) year from the date of such permit, such permit shall become null and void.
39-7.4 Permit fees. Before issuing any sign permit required by this chapter, the City shall collect a fee in accordance with the schedule adopted by Council.
39-7.5 Construction requirements. All signs shall be designed and constructed in conformance with the Chandler Building Code. In the event there is a conflict between the provisions of this chapter and those in the Building Code, the more restrictive provision shall apply.
39-7.6 Design and Integration. All permanent signs shall be fully integrated with the design of the building and the site development, reflecting the architecture, building materials, and landscape elements of the project.
A. The means of integrating freestanding monument signs with the architecture of the building shall be achieved through replication of architectural embellishments, colors, building materials, texture, and other elements found in the building design. Where a cabinet sign is proposed as a component of a freestanding sign, such cabinet shall be bordered or backgrounded by the architectural materials and embellishments found within the building design. The base shall be of a solid material found within the building design, for example, stone, brick, or block. The sign cabinet copy shall be dimensional as either channel letters or flat cut out letters or the face of the cabinet routed with push through acrylic.
B. Integration shall also include the use of sign graphics that are consistent in terms of lettering style, colors, and method of attachment as used for wall-mounted signage found on the building.
C. Each unused panel on a freestanding monument sign shall have an integrated or decorative cover until said panel is utilized.
D. When freestanding, the sign shall not exceed height standards set forth in Section 39-9.16.
E. When mounted on a building, the sign shall be located on or below the fascia or parapet wall within the limits of the tenant's occupied space.
F. Raceways shall be mounted behind the letters only, architecturally integrated and painted to match the building.
G. In no case shall any sign be secured with wires such as guy wires or strips of wood which are visible and not on an integral part of the sign.
H. Signs shall be designed in coordination with landscape plans, planting materials, storm water retention requirements, and utility pedestals, so as not to create problems with sign visibility or prompt the removal of required landscape materials.
I. In no case shall any wall sign exceed eighty (80) percent of the height of the sign band or wall to which the sign is attached, and no such sign shall exceed eighty (80) percent of the length of the leased frontage or eighty (80) percent of the length of the sign band or wall to which the sign is attached. Sign band refers to the specific area on a building or tenant space where signs may be installed.
J. Letter size shall be limited to fifteen (15) percent of building height for all wall-mounted signs.
K. Freestanding on-site signs located near or at entry/exit points of a drive through lane shall not exceed three (3) feet in height.
39-7.7 Required signs. Every building, including single-family homes or group of buildings must be identified by a street number.
39-7.8 Location restrictions for all signs (permanent and temporary).
A. Clearance from fire escapes, exits or standpipes. No sign or structure shall be erected in such a manner that any portion of its surface or supports will interfere in any way with the free use of any standpipe, or any ingress or egress from any door, window, fire escape or any other exit required by Building Code or Fire Department regulations.
B. Vehicular and pedestrian traffic safety. No sign shall obstruct traffic by obstructing the vision of motorists as determined by the Traffic Engineer. No detached sign shall be located adjacent to driveways so as to result in a traffic hazard. No sign shall obstruct minimum pedestrian clearance required by Americans with Disabilities Act or as required by this chapter whichever is greater.
C. Signs on public property. No person, firm or corporation shall erect or cause to be erected any sign which projects over any public sidewalk, street, alley or public place except for signs approved through a special event permit as provided for in Chapter 32 of the Chandler City Code and signs allowed in the public right-of-way as provided for in Section 39-7.8(E).
D. Signs on vehicles. The intent of these regulations is to prohibit the use of vehicle signs as permanent freestanding signs in order to protect the aesthetic qualities of the City's built environment and promote the effectiveness of permitted signs as provided for in Section 39-1. No sign shall be erected or attached to any vehicle except for signs that are magnetically attached to or permanently painted or wrapped on the surface of a vehicle. The primary use of such vehicles shall be in the operation of the business, e.g. transporting goods or providing services, and not in displaying a sign. Vehicles shall be operable and properly licensed. When not in use, the vehicle shall be parked in a lawful manner on the business property so as not to be visible from the public right-of-way, or if this is not possible, as far from the public right-of-way as possible.
Figure 7.8-D1
[image omitted; see the official code]
E. Signs in public right-of-way. The City of Chandler finds that a proliferation of signs in the public right-of-way creates aesthetic blight and visual clutter, which obstructs views, distracts the traveling public and threatens the public health, safety and welfare. The intent herein is to allow a limited number of signs in the public right-of-way in order to maintain safe visibility and protect the aesthetic beauty of the City's built environment. As such, no sign shall be erected or maintained in the public right-of-way except for:
1. Official bus stop advertising signs;
2. Permanent signs installed or displayed by a business or nonresidential use that occupies a building that fronts onto and abuts the public right-of-way as provided for in Sections 39-9.13 Blade Signs and 39-9.18 City Center District;
3. Temporary signs expressly provided for in Section 39-10;
4. Official signs posted by the State of Arizona, the City of Chandler, or other public authorities;
5. The posting of notices required by law; and
6. Signs posted in compliance with Arizona Revised Statutes § 16-1019(C) and this chapter.
F. Signs on properties abutting residential. Signs located on a property that abuts a residentially zoned property and faces said residential shall be non-illuminated, halo-illuminated, or shall utilize other low-intensity lighting methods subject to approval by the Zoning Administrator.
39-7.9 Sign Area and Height Calculations.
A. Sign area is calculated as follows:
1. Signs with backgrounds: Signs with copy mounted, affixed, or painted on a background panel or surface distinctively painted, textured or constructed as a background for sign copy, shall be calculated as that area contained within the smallest rectangle that encloses both the sign copy and the background, not including the supporting structure or architectural embellishments, as shown in Figure 7.9-A1.
Figure 7.9-A1
[image omitted; see the official code]
2. Signs with individual letters or graphics: The area for signs consisting only of individual letters, numerals, symbols, or other similar components shall be calculated as the area of a single rectangle that encompasses all sign components, as shown in Figure 7.9-A2.
Figure 7.9-A2
[image omitted; see the official code]
3. Two-face signs: Where a sign is double-faced, or V-shaped and the interior angle between the two (2) sign faces is forty-five (45) degrees or less, only the larger single face shall be used to determine sign area. If the angle between the two (2) sign faces is greater than forty-five (45) degrees, the sign area is the sum of the areas of the two sign faces, as shown in Figure 7.9-A3.
Figure 7.9-A3
[image omitted; see the official code]
4. Three- or four-face signs: The sign area for three- or four-face signs shall be calculated as fifty (50) percent of the sum of the areas of all sign faces, as shown in Figure 7.9-A4.
Figure 7.9-A4
[image omitted; see the official code]
5. Spherical, free-form, sculptural or other non-planar signs: The area for non-planar signs shall be calculated as fifty (50) percent of the sum of the areas using only the four (4) vertical sides of the smallest four-sided polyhedron that will encompass the sign structure, as shown in Figure 7.9-A5.
Figure 7.9-A5
[image omitted; see the official code]
B. Sign height shall be measured as follows:
1. Freestanding Monument Signs: Sign height is measured as the vertical distance from ground level (finished grade of existing sidewalk, or where there is no sidewalk, the street centerline), to the top of the freestanding sign, not including architectural embellishments, as shown in Figure 7.9-B1.
Figure 7.9-B1
[image omitted; see the official code]
2. Wall Signs: The maximum height of wall, projecting, awning, fascia, mansard, parapet, window-mounted, or other building mounted signs is the vertical distance measured from the first floor elevation to the top of the sign or sign structure as shown in Figure 7.9-B2.
Figure 7.9-B2
[image omitted; see the official code]
3. Blade Signs: The minimum clearance height of hanging blade signs and projecting blade signs is measured from finished grade/sidewalk to the bottom of the blade sign as shown in Figure 7.9-B3.
Figure 7.9-B3
[image omitted; see the official code]
4. Temporary signs: The maximum height for all temporary signs is measured from the sidewalk to the highest point of any portion of the sign.
39-7.10 Inspections. All signs for which a permit is required shall be subject to the following inspections:
A. Footing inspection on all freestanding signs exceeding fifty (50) square feet in area and/or exceeding thirty (30) inches in height.
B. All signs containing electrical wiring shall be subject to the Electrical Code of the City and the electrical components shall bear the label of an approved testing agency.
C. Inspection of all braces, anchors, supports and connections, including wall signs.
D. Shop and/or site inspection to ensure that the sign has been constructed according to approved application and valid sign permit.
39-7.11 Identification.
A. All permanent signs regulated by this chapter shall be marked with the maker's name and the person or firm erecting such sign, the date of installation, and the permit number. This identification shall be permanently attached to the exterior surface of the sign in a location where the information will be readily visible, legible, and accessible after installation of the sign.
B. Temporary signs, except for those not requiring a permit under Section 39-10, shall be marked to show permit number and expiration date.
C. Temporary signs posted in the public right-of-way shall be marked to show the name and telephone number of the person responsible for erecting and maintaining the sign. Such person shall be reachable by telephone Monday through Friday 8:00 a.m. to 5:00 p.m. for purposes of receiving the notice described in Section 39-6.4(C). The person responsible for erecting and maintaining the sign may also provide an e-mail address for the purpose of receipt of notice under this chapter.
39-7.12 Maintenance. All signs shall be maintained in good order and repair at all times so that they constitute no danger or hazard to public safety.
(Ord. No. 4729, § I, 5-25-17; Ord. No. 4931, § 2(Exh.), 8-13-20; Ord. No. 5075, § 2(Exh.), 2-22-24; Ord. No. 5133, §§ 2, 3, 7-28-25)
Source: City of Chandler, Arizona, City Code and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/az/chandler/codes/code_of_ordinances?nodeId=PTVIPL_CH39SICO_39-7REPRFetched: 11/1/2026
