For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 2-32 — C-1 (General Commercial) district

Code of Ordinances, City of Round Rock, Texas (Supp. 27: codified through Ordinance of August 13, 2026 (online updated November 5, 2026)) · Round Rock Zoning and Development Code, art. III, § 2-32

Corpus is an independent public-information project, not the official City of Round Rock website. Stable reference: corpuslaw.us/code/4d716896-f229-44f3-86c3-0ff4bc797bb8

Sec. 2-32. - C-1 (General Commercial) district.

(a) Purpose. To establish and preserve areas of medium intensity land use primarily devoted to general commercial activities. (b) Permitted uses. Uses permitted in the C-1 district may be found in Sec. 2-35. (c) Lot and building dimensional standards. Property and buildings in the C-1 district shall conform to the standards found in Sec. 2-36, with the following supplementary notes: (1) Additional setback requirement. All uses which contain structures in excess of 20 feet in height and which also abut SF (Single-Family) or TF (Two-Family) zoned property, shall be required to meet the following additional setback requirement: for each one foot of height in excess of 20 feet, the structure shall be set back from said abutting property line one extra foot in addition to the minimums set forth in the lot and building dimensional standards in Sec. 2-36. (d) Supplementary development standards. In addition to the standards found in chapter 8 of this Code, the following regulations apply to the C-1 district: (1) Light fixture height. The height of a light fixture shall not exceed 25 feet, however if a light fixture is within 25 feet of a residential lot line, it shall not exceed 20 feet in height. Developments in existence prior to the adoption of this code which have light fixtures exceeding 25 feet may maintain the existing fixture height. (e) General commercial design standards. The following design standards apply to all buildings in the C-1 district. These standards are intended to ensure an attractive built environment in Round Rock. Alternative designs may be approved in writing by the zoning administrator in order to implement a specific, recognized architectural style not accommodated by the design standards below, excluding corporate architecture. Additions to sites and projects with existing buildings may continue the design style that has been previously established. (1) Exterior wall finish. a. All CMU shall have an ashlar pattern. b. Glass with steel framing shall not exceed 25% of the total exterior wall finish for buildings less than three (3) stories tall. Buildings that are three (3) stories or taller may consist of a maximum 50% glass with steel framing. (2) Exterior color. Day-Glo, luminescent, neon, or similar types of color finishes are prohibited. (3) Orientation requirements. Building elevations that face a public street shall have at least 15 percent of the wall facing the street consist of windows and/or pedestrian entrance areas. (4) Building articulation. All buildings shall be designed to include varied relief to provide interest and variety and to avoid monotony. This shall include details that create shade and cast shadows to provide visual relief to the buildings. Horizontal and vertical elements of exterior walls should vary in height, design and projection to provide substantial architectural interest and style. A minimum of four (4) features from the following list shall be incorporated into the building design: a. Arcades/colonnades. b. Decorative cornices. c. Eaves. d. Sloped or unique roof features (e.g., parapets, mansard). e. Variation of roof lines. f. Arched and/or recessed entryway. g. Arched windows. h. Gable windows. i. Oval or round windows. j. Transom windows. k. Stone coursing around windows. l. Shutters. m. Stone or brick accent wall. n. Decorative stone or brick band. o. Decorative tile or metal. p. Awnings. q. Canopies. r. Storefronts. s. Other feature as approved by the zoning administrator. (5) Building elevation variation. The following regulations shall apply to the primary façade and all building elevations facing a public street (right-of-way): a. Changes in wall planes shall be provided with a minimum depth of 12 inches at intervals of not more than 80 feet. A depth of 24 inches is recommended. b. Building elevations shall include a change in color, texture, and/or exterior wall finish material at horizontal intervals of not more than 80 feet. c. Building elevations shall include vertical articulation by means of a minimum of one (1) change in color, texture, and/or exterior wall finish material for any structure exceeding 20 feet in height.

(Ord. No. O-2019-0207, § I, 5-9-2019; Ord. No. O-2019-0463, § XII, 11-26-2019)

Ask a question about Round Rock law

Corpus searches the Round Rock sections it holds and shows the ones that match, with their citations. Free, no sign-in.