Density monitoring system.
Coral Springs Land Development Code § 250150
in effectSec. 250150. - Density monitoring system.
The purpose of the density monitoring system (DMS) is to:
(1) Secure compliance with the city comprehensive plan and county land use plan by assuring that the maximum number of units permitted is within the parameters allowed by these plans.
(2) Provide the city with an accurate accounting of all dwelling units, existing, permitted or probable by each flexibility zone provided for in the city land use element of the comprehensive plan.
(3) Comply with the Broward County Planning Council's requirement to have a monthly review of the status of building in Coral Springs.
Under the DMS, the planning manager submits a report to the city commission on a monthly basis. The report shall be utilized by the city as an "early warning system" that would alert the city of any tendency to exceed the following two (2) levels of ultimate maximum dwelling units: warning system and critical warning system.
To provide that densities shall not exceed maximum densities, an "assured" density for each residential zoning district is assigned by the comprehensive plan. No development permit shall be issued for any residential development which reflects a residential density higher than specified by the assured densities unless the planning manager determines there are reserve units available in the flexibility zone. In no case, however, may the density of any residential development exceed the density designated on the future land use map of the comprehensive plan or fail to comply with the other regulations of the Land Development Code which may affect density.
(Code 1972, § 20-51; Ord. No. 2023-101, § 127, 4-19-23)
Source: City of Coral Springs, Florida, Code of Ordinances, Charter and Land Development Code (Municode Library, library.municode.com)URL: https://library.municode.com/fl/coral_springs/codes/land_development_code?nodeId=CH25ZOOR_ARTIINGE_S250150DEMOSYFetched: 11/8/2026
