Bumpers.
Utah Code § 41-6a-1632
in effect41-6a-1632. Bumpers.
(1) A motor vehicle shall be equipped with a bumper on both front and rear of the motor vehicle, except a motor vehicle that was not originally designed or manufactured with a bumper or bumpers.
(2)
(a) On a motor vehicle required to have bumpers under Subsection (1), a bumper shall be:
(i) at least 4.5 inches in vertical height;
(ii) centered on the vehicle's center line; and
(iii) extend no less than the width of the respective wheel track distance.
(b) A bumper shall be securely mounted, horizontal load bearing, and attached to the motor vehicle's frame to effectively transfer impact when engaged.
(3) If a motor vehicle is originally or later equipped with a bumper, the bumper shall:
(a) be maintained in operational condition; and
(b) comply with this section.
(4) A violation of this section is an infraction.
Amended by Chapter 412, 2015 General Session
Source: Utah Office of Legislative Research and General Counsel (le.utah.gov)URL: https://le.utah.gov/xcode/Title41/Chapter6A/41-6a-S1632.html?v=C41-6a-S1632_2015051220150512Fetched: 10/26/2026
