§ 19.620.100 — Procedures for sign review and approval
Riverside Municipal Code (Supp. No. 33: codified through Ordinance No. 7776, enacted June 23, 2026) · Riverside Municipal Code § 19.620.100
Corpus is an independent public-information project, not the official City of Riverside website. Stable reference: corpuslaw.us/code/508f35e0-5e4d-4930-a7f1-6c50d73077c3
19.620.100 - Procedures for sign review and approval.
A. Permits generally required. Unless a particular type of sign is specifically exempted from the permit requirement, by a provision of this chapter or other applicable law, no person shall erect, change or replace any sign allowed by the provisions of this chapter without first having obtained the necessary permits. 1. A permit is required whenever there is a proposed change to the lighting, supports, structure or mounting device of a sign that requires approval of a permit under the California Building Code. 2. When a sign requires design review pursuant to Section 19.710.020 of the Zoning Ordinance or a Certificate of Appropriateness under Chapter 20.25 of the Municipal Code, those approvals must be obtained before a sign permit application will be issued. B. Sign permit process. The application for a sign permit shall be made in writing on a form provided by the Community & Economic Development Director or his/her designee and shall be accompanied by any fee established by City Council resolution. The Director of Community & Economic Development or his/her designee shall create a standard form to be used as an application for a sign permit; when approved, the application shall constitute the permit. A single application may be used for multiple signs proposed for the same lot, parcel or use; however, decisions and conditions may pertain to individual signs. Sign application requirements shall be established by the Community & Economic Development Director or his/her designee as necessary to review sign proposals for compliance with the provisions of this chapter. Sign permit applications shall include plans, drawings, and other documentation as specified on a form approved by the Director of Community & Economic Development or his/her designee. C. Community & Economic Development Director, Planning Commission or Cultural Heritage Board Approval. When approval of a sign permit or a Certificate of Appropriateness is required, the Community & Economic Development Director or his/her designee, Planning Commission and the Cultural Heritage Board shall base their decisions upon the standards and requirements of this chapter and Title 20 respectively as applied to the structural and locational aspects of the signs. The decision-making authority shall also review signs for consistency with the Citywide Sign Design Guidelines. 1. The Guidelines are intended to provide examples of techniques and approaches that applicants can use to meet the City's expectations for signs for nonresidential uses but are not intended to illustrate all approaches that may be appropriate on a specific site. Where any inconsistency between the requirements of this chapter or the Zoning Ordinance is perceived, the requirements of this chapter and the Zoning Ordinance shall prevail. 2. The Community & Economic Development Director or his/her designee, Planning Commission, or Cultural Heritage Board may approve a deviation from the sign area and height standards of this chapter so long as the total sign area or total height for any individual type of sign does not exceed the sign area and height standards by more than ten percent. a. The request for modification shall be reviewed and decided in the same manner and at the same time as the approval of the associated sign permit, sign program or Certificate of Appropriateness. b. In order to approve a modification as provided for in this section, the Approval Authority must make the following finding in addition to any other findings that this chapter requires for the association application: i. The proposed modification is consistent with the purposes of this chapter; ii. There are unique physical circumstances related to the shape, dimensions, or topography of the property on which the sign is located that make the modification necessary in order to ensure that the sign is visible from the adjacent right-of-way; iii. The proposed modification will not be detrimental to the health, safety, and general welfare of the public or injurious to the environment or to the property or improvements in the surrounding area; iv. The proposed modification is consistent with the design principles in Section 19.620.060. D. Conditions of approval. A sign permit application may be approved subject to any of the following conditions, as applicable: 1. Compliance with other legal requirements, including encroachment, building, electrical, plumbing, demolition, mechanical, etc. When such other approvals are necessary, they must be obtained before the sign permit application will be granted. 2. Remedy for outstanding zoning violations: if the sign is proposed to be located on a property on which there is a zoning violation, then the sign permit may be issued upon condition that the violation is remedied before the sign is constructed, or simultaneously therewith. E. Processing of permit applications. All sign permits applications shall be initially reviewed by the Community & Economic Development Director or his/her designee. When a permit application complies with this chapter and all other applicable standards and requirements, the application shall be granted. An application may be approved subject to such conditions as are necessary for full compliance with this chapter and all other applicable laws, rules and regulations. 1. Reference to Cultural Heritage Board. When a sign is proposed to be located in a historic district or on a property designated for historic preservation, the Community & Economic Development Director or his/her designee shall refer the permit application to the Cultural Heritage Board for review and action pursuant to Section TBD of this chapter. 2. Notice of incompleteness. The Community & Economic Development Director or his/her designee shall initially review a sign permit application for completeness. If the application is not complete, the Community & Economic Development Director or his/her designee shall give written notice of the deficiencies within 15 business days following submission of the application; if no notice of incompleteness is given within such time, then the application shall be deemed complete as of the last day on which notice of completeness could have been given. If a notice of incompleteness is given, the applicant shall have 15 business days thereafter to file a corrected and complete application, without payment of additional fee. F. Time for decision. Unless the applicant submits a written request for a time waiver, or consents to a time waiver, the Community & Economic Development Director or his/her designee shall issue a written decision on a sign permit application within 45 business days of when the application is deemed complete. Failure to issue such a decision in a timely manner shall be deemed a denial of the application, and create an immediate right of appeal to the Planning Commission. In cases where the Community & Economic Development Director or his/her designee refers the permit application to the Cultural Heritage Board, then the time for decision shall be according to the time limits prescribed for hearings and approvals in Title 20 of the RMC. G. Permits issued in error. In the event that a sign permit is issued, and the issuance is found to be in error at any time before substantial physical work on actual construction has been accomplished, then the permit may be summarily revoked by the City simply by giving notice to the permittee; such notice shall specify the grounds for revocation. In such event, the applicant may reapply within 30 calendar days for a new permit, without paying a new application fee. H. Fees for signs constructed without a permit. Where work for which a permit is required by this chapter is performed prior to obtaining such permit, the following late permit fees shall apply. The permit fees shall be computed based upon the date on which application is made for a sign permit, design review approval or Certificate of Appropriateness, or a variance, whichever process is first necessary to obtain a sign permit: 1. When application is made within 30 days after first notice has been given of the violation, the permit fee shall be two times the established permit fee. 2. When application is made between 31 and 45 days after first notice has been given of the violation, the permit fee shall be four times the established permit fee. 3. When application is made over 45 days after first notice has been given of the violation, the permit fee shall be ten times the established permit fee. 4. After an application submittal for a sign permit, design review approval or Certificate of Appropriateness, or variance, additional time limits may be established for the securing of permits and completion of any additional sign work that may be required. If such time limits are not adhered to, the amount of time by which the deadline(s) is (are) missed shall be added to the time periods noted above for the purpose of establishing the final permit fee. 5. In no case shall a late permit fee be assessed in excess of $1,000.00. I. Site approval cards. A site approval card will be issued for each sign for which a sign permit is issued. Each sticker is applicable to only one sign and for only the location specified in the permit. The sticker is not transferable from one sign to another; however, the sticker is transferable to a new owner or lessee. Stickers must be maintained in a legible state. J. Sign contractors. 1. Responsibility for securing permits. It shall be the duty of the contractor or person, who erects, installs, paints, constructs or alters a sign to secure all necessary permits for such work. It shall be the responsibility of the property owner and/or lessee to assure that the contractor is properly licensed and bonded, and that the contractor secures all necessary permits. No sign contractor shall install a sign for which a permit is required unless such permit has been duly issued before construction work begins. A sign permit shall not be issued unless the sign contractor's name and contact information appears on the permit application. 2. Identification label. All signs installed by sign contractors have attached to them an identification label, not exceeding four square inches in size, listing the following information: name of sign contractor, City permit number, electrical current, month and year erected. 3. Violations by sign contractors. Wherever a sign violation has occurred, it shall be the duty of the Community & Economic Development Director or his/her designee to determine which sign contractor, if any, performed the sign work. The following procedure shall be followed in pursuing sign contractors installing signs for which a valid permit has not first been secured, or in violation of permit terms and conditions: a. First violation. A letter shall be sent by certified mail to the sign contractor setting forth the City's requirements for sign permits and indicating that future violations will result in a complaint being filed with the Contractors' State License Board and/or legal action being taken against said contractor. b. Second violation. A complaint shall be filed with the Contractors' State License Board and a copy of such complaint shall be sent to the sign contractor with a letter indicating that legal action may be taken if further violations occur. All correspondence shall be by certified mail. c. Third and subsequent violations. Legal action may be taken against the contractor, using any method authorized by law. K. Creative Sign Permit. 1. Purpose. This section establishes standards and procedures for the review and approval of Creative Sign Permits. The purposes of a Creative Sign Permit are to: a. Encourage signs of unique design that exhibit a high degree of imagination, inventiveness, creativity and thoughtfulness; and b. Provide a process for the flexible application of sign regulations in ways that will allow creatively designed signs. 2. Applicability. An applicant may request approval of a Creative Sign Permit for signs in Commercial, Mixed-Use, and Industrial Zones in order to allow a design approach that differs from the provisions of this Chapter but comply with the purpose and findings of this Section. 3. Application Requirements. A Creative Sign Permit application and fee shall be submitted in accordance with Chapter 19.660 General Application Processing Procedures. 4. Approval Authority. An application for a Creative Sign Permit shall be subject to review and approval by the Community & Economic Development Department Director or designee pursuant Chapter 19.650 - Approving and Appeal Authority. 5. Findings. In approving an application for a Creative Sign Permit, the Community and Economic Development Director or designee shall ensure that the proposed sign meets the following design criteria: a. Design Quality. The sign shall: i. Constitute a substantial aesthetic improvement to the site and shall have a positive visual impact on the surrounding area; ii. Be of unique design, and exhibit a high degree of imagination, inventiveness, spirit, and thoughtfulness; iii. Provide strong graphic character through the imaginative use of color, graphics, proportion, quality materials, scale, and texture; and. iv. Utilize creative illumination and dimensional lettering techniques. Examples include but are not limited to combinations of lighting and lettering techniques such as exposed neon, halo lighting, external decorative lighting, reverse pan channel letters, pin mounted letters, built up letters, and routed out letters. b. Contextual Criteria. The sign shall contain at least one of the following elements: i. Classic historic design style compatible with the historic character of the building or site; ii. Creative design reflecting current or historic character of the sign's surroundings; or iii. Inventive representation of the logo, name, or use of the building or site. c. Architectural Criteria. The sign shall: i. Utilize or enhance the architectural elements of the building or site; and ii. Be placed in a logical location in relation to the overall composition of the building's façade or site design. d. Impacts on surrounding uses. The sign shall be located and designed not to cause light and glare impacts on surrounding uses, especially residential uses.
(Ord. 7717, § 8, 2025; Ord. No. 7701, § 40, 2025; Ord. 7331 §96, 2016; Ord. 7300 §2, 2015; Ord. 6966 §1, 2007)
Ask a question about Riverside law
Corpus searches the Riverside sections it holds and shows the ones that match, with their citations. Free, no sign-in.
