For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 72.3 — Calculations and measurements

Code of Ordinances of the City of Huntsville, Alabama (Supp. No. 30 (codified through Ord. No. 26-196, adopted March 12, 2026) with enacted ordinances through Ord. No. 26-837 (September 24, 2026) applied from official council minutes and ordinance copies) · Huntsville Code of Ordinances, App. A, art. 72, § 72.3

Corpus is an independent public-information project, not the official City of Huntsville website. Stable reference: corpuslaw.us/code/525102e5-9dc9-4afa-a0e0-7452b94675bb

72.3. - Calculations and measurements.

For the purpose of this article, the following shall be the method for determining and interpreting any form of calculation or measurement. 72.3.1 Sign setback. All required setbacks for signs shall be measured as the distance in feet from the applicable lot line, or other stated point of measurement, to the closest point on the sign structure. 72.3.2 Sign height. (1) The height of a sign shall be computed as the distance from the base of the sign at normal grade (average grade at the base of the sign) to the top of the highest attached component of the sign. Normal grade shall be construed to be the newly established grade after construction, exclusive of any filling, berming, mounding, or excavating undertaken for the purpose of locating or increasing the height of sign. (2) The filling of a pre-existing hole or depression to create an average grade at the same level as that surrounding the hole or depression is permitted, provided such filling is allowed by other ordinances. (3) In cases where the normal grade is below grade at street level, sign height shall be computed on the assumption that the elevation of the normal grade at the base of the sign is equal to the elevation of the nearest point of the crown of a public or private street. See figure A. ![Figure: AppA_72-3-2_fA.png](https://figures.74-208-44-221.nip.io/huntsville/471117/1e6da9899982df9d72de4628a997f05177bda2bd3d2b9ca5bf3bf3c7494d96a4.png) Figure A: Illustration of the measurement of sign height when the grade at the bottom of the sign is below the grade of the adjacent street. (4) Any material whose major function is providing structural support for a sign shall be considered part of the sign for purposes of determining sign height. (5) Where a distance is established for the clearance of a sign, such measurements shall be made from the normal grade of the ground, directly under the applicable sign or structure supporting the sign, and the bottom most point of the sign or the structure supporting the sign, whichever is closest. 72.3.3 Sign area. The surface of a sign to be included when computing maximum allowable square footage of sign area shall be calculated as follows: (1) For sign copy mounted or painted on a background panel, cabinet, or surface distinctively painted, textured, lighted, or constructed to serve as the background for the sign copy, the sign area shall be computed by means of the smallest square, circle, rectangle, triangle, or combination thereof that encompasses the extreme limits of the background panel, cabinet, or surface. See figure B and figure C. ![Figure: AppA_72-3-2_fB.png](https://figures.74-208-44-221.nip.io/huntsville/471117/14f294e2909e445998f26fe4f384b04c1d4d2c9d475090bb9c0b60056482aa51.png) Figure B: Illustration of sign area calculation for a monument sign with copy on a distinct cabinet. ![Figure: AppA_72-3-2_fC.png](https://figures.74-208-44-221.nip.io/huntsville/471117/4d26bcbe99cc5a59a4b8e100d05bf6afde2d9ae84be1a7dceddd234e732c9a32.png) Figure C: Illustration of computing the sign area for wall signs with a background panel or cabinet. (2) For sign copy where individual letters or elements are mounted on a building façade where there is no background panel, cabinet, or surface distinctively painted, textured, lighted, or constructed to serve as the background for the sign copy, the sign area shall be computed by means of the combination of the smallest square, circle, rectangle, triangle, or combination thereof that encloses all the letters or elements associated with the sign. See figure D. ![Figure: AppA_72-3-2_fD.png](https://figures.74-208-44-221.nip.io/huntsville/471117/0fd6af66447f983f40d9f989af5933558a15d0c151bf1f6712f8e0d8635b0a2e.png) Figure D: Illustration of sign area calculation for two differently shaped wall signs with individual letters. (3) In cases where there are multiple sign elements on the same surface, the zoning administrator shall have the authority to determine the outermost boundaries of individual sign elements based on the shape of the sign and the distance separating various elements of sign copy. Decorative edging or other window treatments that are not an integral part of the sign copy shall not be considered a part of the sign for the purposes of this article. (4) The calculation of sign area shall not include any supporting framework, bracing, or decorative fence or wall unless such structural support is determined to constitute an integral part of the sign design by means of any form of sign copy, as determined by the zoning administrator. See figure A. (5) In the case of a three-dimensional sign where the sign faces are not mounted back-to-back, the sign area shall be calculated by the smallest square, circle, rectangle, triangle, or combination thereof that encompasses the profile of the sign message, multiplied by two. The profile used shall be the largest area of the sign face visible from any one point. (6) Except for three-dimensional signs, the sign area for a sign with more than one face (multi-faced signs) shall be computed by adding together the area of all sign faces unless two sign faces are mounted back-to-back. (7) When two flat sign faces are placed back-to-back and when such sign faces are part of the same sign structure and are not more than 12 inches apart, the sign area shall be computed by the measurement of one of the faces. If the two faces are unequal, the sign area shall be calculated based on the larger of the two faces. 72.3.4 Determining width of building facades. (1) For the purposes of this article, the length of the building wall that faces a public street shall be considered the building facade unless otherwise stated. (2) The calculation of the width or lineal measurement of any façade shall be the measurement of the façade between two side facades. The calculation shall be based on viewing the façade from a 90-degree angle (i.e., straight on), regardless of façade insets, offsets, or angles. See figure E. ![Figure: AppA_72-3-4_fE.png](https://figures.74-208-44-221.nip.io/huntsville/471117/1d74e66227c92c8f7fe183734fdc2495dd6cac777d4d7bb86c04b5f21bd92db4.png) Figure E: Illustration of façade width measurement on varied façade shapes.

(Ord. No. 21-46, § 1(Exh. A, § A), 2-25-2021)

Ask a question about Huntsville law

Corpus searches the Huntsville sections it holds and shows the ones that match, with their citations. Free, no sign-in.