IC: Industrial Commercial
Reno Annexation and Land Development Code § 18.02.402
in effect18.02.402 - IC: Industrial Commercial
(a) Purpose The IC district is intended to provide for a mix of industrial, research and development, and commercial uses. Sites are commonly comprised of moderate-footprint buildings (generally less than 500,000 square feet) designed for warehousing, flex space, manufacturing, and supporting office uses. This zoning district should be separate from residential development by natural and man-made buffers.
[image omitted; see the official code]
Table 2-28 IC: Lot and Building Standards
General Standards
A | Lot size, minimum | 0.5 acre
B | Lot width, minimum | 50 ft
Building area, maximum | 500,000 sf [1]
Setbacks, minimum | Principal Buildings
C | Front | Sites 20 acres or less: 10 ft Sites more than 20 acres: 30 ft
D | Side | 0 ft [2]
E | Rear | 0 ft [2]
Height, maximum
Height | 55 ft [3]
Other
Accessory uses/structures: See Chapter 18.03 Article 4
Site and building standards for employment districts: See Chapter 18.04 Article 11
Development standards (parking, landscaping, etc.): See Chapter 18.04
Notes: [1] Buildings may exceed the 500,000 sf maximum building area with approval of a major site plan review. [2] Side and Rear Yard setbacks: If the building is located immediately adjacent to a residentially zoned property, a minimum setback shall be 10 feet, and subject to residential adjacency standards. [3] One foot of additional step back is required adjacent to streets and residentially zoned property for each one foot above the height of 35 feet.
(Ord. No. 6692, § 1(Exh. A), 1-8-25)
Source: City of Reno, Nevada, Administrative Code, City Charter and Annexation and Land Development Code (Municode Library, library.municode.com)URL: https://library.municode.com/nv/reno/codes/land_development_code?nodeId=CH18.02ZODI_ART4EMDI_18.02.402ICINCOFetched: 11/1/2026