§ 11-64-10 — Safety inspection
Memphis Code of Ordinances (Supp. No. 33: codified through Ordinance No. 5959, enacted May 12, 2026) · Memphis Code of Ordinances § 11-64-10
Corpus is an independent public-information project, not the official City of Memphis website. Stable reference: corpuslaw.us/code/5fec33a4-bf78-438e-8ac9-083235ca50ec
Sec. 11-64-10. - Safety inspection.
In addition to any and all other tests required herein, all motor vehicles registered in the city shall pass the safety inspection prior to registration. The following components shall be inspected: 1. Visible smoke. 2. Emergency/parking brakes. The emergency and parking brakes shall function according to the manufacturer's specifications. When emergency brakes or parking brakes are applied, the motor vehicle should not move more than 12 inches in either direction when lightly accelerated. 3. Turn signals. The turn signals and components shall function according to the manufacturer's specifications. Both the left and right turn signals on the front and rear of the vehicle must be operational. No aftermarket lens that reduces the candle light power should be affixed to the motor vehicle. The lights shall be in good working condition and operational in accordance with state law. 4. Rear lights. The rear lights and components shall function according to the manufacturer's specifications. Rear lights on both sides must be fully illuminated when activated. No aftermarket lenses that reduce the candle light power should be affixed to the motor vehicle. The lights shall be in good working condition and operational in accordance with state law. 5. Brake lights. The brake lights and lens shall function according to the manufacturer's specifications. Both the left and right brake lights must illuminate brightly when the brakes are applied. This must occur when headlights are in the on and off state. No aftermarket lens that reduces the candle light power should be affixed to the vehicle. The lights shall be in good working condition and operational in accordance with state law. 6. Headlights. The headlights and components shall function according to the manufacturer's specifications. Both headlights must operate and be properly aligned. The dimmer switch must change the headlights from high to low beam. No aftermarket lens that reduces the candle light power should be affixed to the vehicle. No device or lens may impair the direction or intensity of the headlights. 7. Windshield wipers. The windshield wipers and components shall function according to the manufacturer's specifications. The windshield wipers must cover the sweep of the windshield and the blades shall not be frayed or missing. 8. Windshield. The windshield, front and rear, is designed to help support the roof of the motor vehicle. Cracks or starbursts can reduce the structural integrity of the windshield. Any crack six inches or longer anywhere on the windshield, a crack three inches in length inside the critical area (wiper sweep), starbursts larger than one inch in diameter in the critical area, or a missing windshield shall be cause for inspection failure. 9. Rearview mirrors. The rearview mirror shall be attached to the inside of the windshield. The mirror shall not be broken or missing, and shall be in good working condition. 10. Side mirrors. The side mirrors shall be attached to the sides of the motor vehicle according to the manufacturer's specifications. The mirrors shall not be broken, or missing, and shall be in good working condition. 11. Window tint. No window on a motor vehicle may have a visible light transmittance of less than 35 percent. Windshields, specifically, may not have a visible light transmittance of less than 70 percent, with the exception of the manufacturer's standard installed shade band, which reduces the visible light transmittance in the uppermost portion of the windshield. (The shade band should not exceed six inches from the top of the windshield, or below the AS1 line on the windshield.) 12. Exhaust and muffler. The muffler and exhaust system shall be in good working order and in constant operation to prevent excessive or unusual noise, annoying smoke, escape of excessive gas, steam or oil, and to prevent entrain carbon monoxide from entering the vehicle. The exhaust system shall extend pass the rear bumper or exit near the rear tires on the motor vehicle according to the manufacturer's specifications.
(Ord. No. 5317, § 21-310, 7-21-2009; Ord. No. 5559, § 2, 9-2-2014)
Ask a question about Memphis law
Corpus searches the Memphis sections it holds and shows the ones that match, with their citations. Free, no sign-in.
