For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 35.4.307 — Sign Calculations and Measurements

Code of the City of Glendale, Arizona (Supp. No. 115: codified through Ordinance No. O26-19, adopted April 14, 2026) · Glendale City Code § 35.4.307

Corpus is an independent public-information project, not the official City of Glendale website. Stable reference: corpuslaw.us/code/6423427d-0fc7-4e46-b200-fe51df3a1d1f

35.4.307 - Sign Calculations and Measurements.

A. Sign area calculations shall be as follows: 1. Sign copy mounted or painted on a background panel or area distinctively painted, textured, or constructed as a background for the sign copy shall be measured as that area contained within the sum of the smallest rectangles that will enclose both the sign copy and the background. [image omitted; see the official code] 2. Sign copy mounted as individual letters or graphics against a wall, fascia, mansard, or parapet of a building or other structure that has not been painted, textured, or otherwise altered to provide a distinctive background for the sign copy shall be measured as a sum of the smallest standard geometric shape that will enclose each word and each graphic in the total sign. 3. The area of window signs shall include the window area as a continuous surface until divided by an architectural or structural element, excluding mullions. Window signage area is calculated in the same manner as described in Section 35.4.307(A) above. [image omitted; see the official code] 4. Perforated window graphics/window clings, that is, those elements which serve as an exterior window sign while still allowing visibility through the window shall be counted as a window sign. [image omitted; see the official code] B. Measurement of Sign Height 1. Sign height is measured from the base of the sign at the ground to the highest point of the sign or surrounding structure/architectural element. Where a sign is installed in a location where its contact with the ground is below the surface of a public sidewalk in conjunction with a public right-of-way, the sign height may be taken from the top of sidewalk. [image omitted; see the official code] C. Measurement of Vertical Clearance 1. Where prescribed in this Section, the vertical clearance is measured as the vertical distance measured from the ground directly below the sign to the lowest point of the sign or surrounding structure/architectural elements associated with the sign. [image omitted; see the official code] D. Multi-face signs shall be measured as follows: 1. Two (2) face signs: If the interior angle between the two (2) sign faces is sixty (60) degrees or less, the area shall be of one (1) face only. If the angle between the two (2) sign faces is greater than sixty (60) degrees, the sign area will be the sum of the areas of the two (2) faces. [image omitted; see the official code] 2. Three (3) face signs: If the interior angle between the center sign and each outer sign is one hundred fifty (150) degrees or less, the area shall be fifty percent (50%) of the sum of the areas of all faces. If the angle between the center sign and either outer sign is greater than one hundred fifty (150) degrees, the sign area shall be the sum of the areas of all faces. [image omitted; see the official code] 3. Signs comprised of more than three (3) faces: Sign area shall be calculated as the total of all sign faces. 4. Free-form and other non-planar signs. The area of a spherical, free-form or other non-planar sign is fifty percent (50%) of the sum of the areas, using only the four (4) vertical sides of the smallest four-sided polyhedron which will completely enclose the entire sign structure. [image omitted; see the official code]

Ask a question about Glendale law

Corpus searches the Glendale sections it holds and shows the ones that match, with their citations. Free, no sign-in.