For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 707 — Total sign surface area

Code of Ordinances, City of Batesville, Mississippi (Supp. No. 54: codified through Ordinance No. 2023-08-914, adopted August 15, 2023) · Batesville Code of Ordinances, App. A, art. VII, § 707

Corpus is an independent public-information project, not the official City of Batesville website. Stable reference: corpuslaw.us/code/670ea53a-c4dc-4d7f-8c22-ea50e834a31a

Sec. 707. - Total sign surface area.

(a) Unless otherwise provided in this article, the total surface area devoted to all signs on any lot shall not exceed the limitations set forth in this section, and all signs except temporary signs shall be included in this calculation. (b) Unless otherwise provided in this article, the maximum sign surface area permitted on any lot in any residential district is eight (8) square feet. (c) Subject to the other provisions of this section, the maximum sign surface area permitted on any lot in the C-1 district shall be determined as follows: (1) There may be not more than 0.5 square feet of sign surface area per linear foot of lot street frontage up to one hundred (100) feet of frontage. (2) There may be up to 0.75 square feet of additional sign surface area per linear foot of lot street frontage in excess of one hundred (100) feet. (d) Subject to the other provisions of this section, the maximum sign surface area on any lot in the C-2, C-3, I-1 and I-2 districts shall be determined by multiplying the number of linear feet of street frontage of the lot by 1.0 feet. However, in no case may the total sign surface area exceed five hundred (500) square feet. (e) If a lot has frontage on more than one (1) street, then the total sign surface area permitted on that lot shall be the sum of the sign surface area allotments related to each street on which the lot has frontage. However, the total sign surface area that is oriented toward a particular street may not exceed the portion of the lots total sign surface area allocation that is derived from frontage on the street. (f) Whenever a lot is situated such that it has no street frontage on any lot boundary and an applicant desires to install on such a lot a sign that is oriented toward a street, then the total sign surface area permitted on that lot shall be the sign surface areas that would be allowed if the lot boundary closest to the street toward which such sign is to be oriented fronted on such street. The applicant shall be restricted to using only one (1) street and the closest lot boundary to this street for determining the total permitted sign surface area. However, the applicant shall be given the opportunity to determine the one (1) street used in the calculation. (g) The sign surface area of any sign located on a wall of a structure may not exceed fifty (50) percent of the total surface area of the wall on which the sign is located. (h) The "central business district" is that area of the city designated as the central business district by the mayor and board of aldermen by ordinance adopted on November 2, 1999, and of record in Minute Book E-2 at page 3 of the minutes of the city. Signs located in the central business district that advertise businesses located in the central business district shall be calculated as follows: (1) Each ground floor occupant of a business structure is permitted two (2) signs facing each street upon which his business fronts. The area of said sign or signs shall not exceed two and one-half (2½) square feet of sign for every foot of front footage of the applicable building, subject to the following restrictions: a. The maximum square footage sign allotment shall not exceed one hundred fifty (150) square feet. b. Where frontage is on more than one (1) street, only the signs computed with the front footage along the street shall face that street; but in no case shall the total square footage of signs exceed one hundred fifty (150) square feet, except where additional square footage has been approved by the governing authority. c. Business establishments situated on the second floor of business structures and having an exterior entrance shall be permitted one (1) wall sign not to exceed four (4) square feet located adjacent to the entrance. d. Wall signs shall not be higher than the roof line of the buildings. e. No sign shall be located closer than two (2) feet from any other business located on the ground floor of the same or adjoining building, and no business sign shall be located closer than four (4) feet in any direction from any other sign.

(Ord. No. 2010-09-743, 9-7-10)

Ask a question about Batesville law

Corpus searches the Batesville sections it holds and shows the ones that match, with their citations. Free, no sign-in.