For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 60-116 — Sample collection

Code of Ordinances of Kansas City, Missouri (Supp. No. 140, Update 1: codified through Ordinance No. 260692, enacted August 13, 2026) · Kansas City Code § 60-116

Corpus is an independent public-information project, not the official City of Kansas City website. Stable reference: corpuslaw.us/code/68a70adf-7f13-413a-b5ab-c31e1853b998

Sec. 60-116. - Sample collection.

(a) The reports required in sections 60-152, 60-154, 60-155, and 60-161 must be based upon data obtained through appropriate sampling and analysis performed during the period covered by the report, which data are representative of conditions occurring during the reporting period. Except as indicated in subsection (b) and (c) of this section or unless time-proportional comprise sampling or grab sampling is authorized by the director, industrial users shall collect wastewater samples using 24-hour flow proportional composite collection techniques. Where time-proportional composite sampling or grab sampling is authorized by the director, the samples must be representative of the discharge. The decision to allow the alternative sampling must also be documented in the industrial user file for that facility or facilities. Using protocols (including appropriate preservation) specified in 40 CFR Part 136 and appropriate EPA guidance, multiple grab samples collected during 24-hour period may be comprised prior to analysis as follows: for cyanide, total phenols, and sulfides the samples may be composited in the laboratory or in the field; for volatile organics and oil and grease, the samples may be composited in the laboratory. Composite samples for other parameters unaffected by the composting procedures as documented in approved EPA methodologies may be authorized by the director, as appropriate. In addition, grab samples may be required to show compliance with instantaneous discharge limits. (b) Samples for oil and grease, temperature, pH, cyanide, phenols, toxicity, sulfides, and volatile organic compounds shall be obtained using grab sample collection techniques. (c) For sampling required in support of baseline monitoring and 90-day compliance reports required in sections 60-152 and 60-154, a minimum of four grab samples must be used for pH, cyanide, total phenols, oil and grease, sulfide and volatile organic compounds for facilities for which historical sampling data do not exist. For facilities for which historical sampling data are available, the director may authorize a lower minimum. For reports required in sections 60-155 and 60-161, the director shall require the number of grab samples necessary to assess and assure compliance with applicable pretreatment standards and requirements. (d) All wastewater samples shall be representative of the industrial user's effluent or discharge. Wastewater monitoring and flow measurement facilities shall be properly operated, kept clean, and maintained in good working order at all times. The failure of an industrial user to keep its monitoring facility or facilities clean and in good working order shall not be grounds for the industrial user to claim that sample results are unrepresentative of its discharge or effluent.

(Ord. No. 120551, § 1, 6-28-12; Ord. No. 230390, § 1, 5-11-23)

Ask a question about Kansas City law

Corpus searches the Kansas City sections it holds and shows the ones that match, with their citations. Free, no sign-in.