C-2 (Local Commercial) district.
Round Rock Zoning and Development Code, art. III, § 2-34
in effectSec. 2-34. - C-2 (Local Commercial) district.
(a) Purpose. To establish and preserve areas of low-medium to medium intensity land use primarily devoted to local commercial and office uses on sites of two (2) acres or less. Development projects larger than two (2) acres may be permitted if comprehensively designed as a village center.
(b) Permitted uses. Uses permitted in the C-2 district may be found in Sec. 2-35.
(c) Lot and building dimensional standards. Property and buildings in the C-2 district shall conform to the standards found in Sec. 2-36.
(d) Supplementary development standards. In addition to the standards found in chapter 8 of this Code, the following regulations apply to the C-2 district:
(1) Light fixture height. The height of a light fixture shall not exceed 20 feet.
(e) Local commercial design standards. The following design standards apply to all buildings in the C-2 district. These standards are intended to ensure an attractive built environment in Round Rock. Selection of materials, color, building orientation, articulation, and windows shall reflect the design themes established in the neighborhood which the proposed development borders. Alternative designs may be approved in writing by the zoning administrator in order to implement a specific, recognized architectural style not accommodated by the design standards below, excluding corporate architecture. Additions to sites and projects with existing buildings may continue the design style that has been previously established.
(1) Exterior wall finish. Architectural CMU shall have an ashlar pattern.
(2) Exterior color. Day-Glo, luminescent, neon, or similar types of color finishes are prohibited.
(3) Glass. Mirrored glass with a reflectivity of 20 percent or more is prohibited on the exterior walls and roofs of all buildings and structures.
(4) Orientation requirements.
a. Building elevations that face a public street shall have at least 15 percent of the wall facing the street consist of windows and/or pedestrian entrance areas.
b. Main entrances shall be visible to pedestrians from the street or a public plaza on the primary frontage.
c. Buildings with multiple street frontages shall be designed with primary facades facing each public street.
(5) Building articulation. All buildings shall be designed to include varied relief to provide interest and variety and to avoid monotony. This shall include details that create shade and cast shadows to provide visual relief to the buildings. Horizontal and vertical elements of exterior walls should vary in height, design and projection to provide substantial architectural interest and style. A minimum of four (4) features from the following list shall be incorporated into the building design:
a. Arcades/colonnades.
b. Decorative cornices.
c. Eaves.
d. Offset in building elevation.
e. Variation of roof lines.
f. Arched and/or recessed entryway.
g. Arched windows.
h. Gable windows.
i. Oval or round windows.
j. Transom windows.
k. Stone coursing around windows.
l. Shutters.
m. Stone or brick accent wall.
n. Decorative stone or brick band.
o. Decorative tile or metal.
p. Awnings.
q. Canopies.
r. Storefronts.
s. Other feature as approved by the zoning administrator.
(6) Building elevation variation. The length of walls facing public streets shall be broken into smaller planes. Wall planes shall not extend more than an average of 35 feet without an offset or interruption by a pilaster or structural frames, change in roof line, or change in exterior wall finish.
(Ord. No. O-2019-0206, § I, 5-9-2019; Ord. No. O-2019-0463, § XII, 11-26-2019)
Source: City of Round Rock, Texas, Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH2ZODIUSRE_ARTIIICODI_S2-34LOCODIFetched: 11/16/2026
