U-P district.
El Paso City Code § 20.18.470
in effect20.18.470 - U-P district.
A. Monument signs shall comply with the following requirements:
1. Permit required: yes;
2. Maximum number: one monument sign per street frontage, not to exceed two signs per premise;
3. Maximum sign area: eighty square feet;
4. Maximum sign height: ten feet;
5. Location: no portion of the sign shall be closer than fifteen feet from the back of the curbline; if the property line is located more than fifteen feet from the curbline, signs shall be erected within the property line, and no portion of a sign shall extend beyond the property line;
6. Illumination: may be directly or internally illuminated with the light source not visible from the adjacent street or public right-of-way. No flashing or intermittent illumination shall be permitted;
7. Additional standards: shall comply with the Union Plaza architectural and design guidelines; shall apply only to new construction in the U-P district.
B. Office directory signs shall comply with the following requirements:
1. Permit required: yes;
2. Maximum number: one wall sign per office building entry not to exceed two signs per building;
3. Maximum sign area: two and one-half square feet per tenant not to exceed twenty-five square feet per building entry;
4. Location: shall not project more than eighteen inches from the face of the wall; shall be erected in such a manner that building fenestration is not obscured and the architectural integrity of the building is not altered; shall not extend beyond the edges of the structure;
5. Illumination: internal or indirect; may not be flashing or intermittent;
6. Additional standards: shall only be permitted as a wall sign; shall comply with the Union Plaza architectural and design guidelines; shall apply only to new construction in the U-P district.
C. Shingle signs shall comply with the following requirements:
1. Permit required: yes;
2. Maximum number: four per building;
3. Maximum sign area: six square feet;
4. Location: no portion of the bottom edge of the shingle sign shall be more than two feet below the edge of the canopy; no portion of the shingle sign shall extend beyond the edge of the canopy; an eight-foot clearance shall be maintained between the bottom edge of the shingle and the ground; shall be placed perpendicular to the front wall of the building and not project more than twenty-four inches over public rights-of-way;
5. Illumination: not permitted;
6. Additional standards: shall comply with the Union Plaza Architectural and Design Guidelines.
D. Wall signs shall comply with the following requirements:
1. Permit required: yes;
2. Maximum number: one sign per street frontage for single-tenant buildings, and one sign per tenant for multi-tenant buildings;
3. Maximum sign area: ten percent of the building facade for single-tenant buildings on each elevation, including any canopies or awnings. For multi-tenant buildings, the sum total area of all signs shall not exceed ten percent of the building facade on each elevation, including any canopies or awnings.
4. Location: shall not project more than eighteen inches from the face of the wall or the surface of the canopy or awning; shall be erected in such a manner that building fenestration is not obscured and the architectural integrity of the building is not altered; shall not extend beyond the vertical edges of the structure; sign may extend beyond the roof line or parapet up to 50 percent of the total square footage of the sign. Any sign extending beyond the roof line or parapet is permitted to do so only in the case of single channel letters or logos. Rectangular traditional cases back lit or not, may not extend beyond the roof line or parapet.
5. Illumination: internal or indirect; may not be flashing or intermittent;
6. Additional standards: shall comply with the Union Plaza Architectural and Design Guidelines; shall apply only to new construction in the U-P district.
E. Perpendicular signs shall comply with the following requirements:
1. Permit required: Yes;
2. Maximum number: One per street frontage or pedestrian right-of-way per building. Buildings must have at least ninety feet of continuous street frontage or pedestrian right-of-way and must be at least two stories in height;
3. Shall be permitted only on building facades fronting public rights-of-way, where no parking shall be located between the building facade and the right-of-way;
4. Maximum sign area: Twenty-five square feet;
5. Location: A ten-foot clearance shall be maintained between the bottom edge of the perpendicular sign and the ground; the sign shall not be above the second story; shall be placed perpendicular to the wall of the building and not project more than forty-six inches over public rights-of-way;
6. Illumination: Sign may be illuminated but digital/CEVM technology is not permitted;
7. Additional standards: Only permitted for business identification.
8. Shall require a special privilege license to be obtained in conjunction with sign application where the sign projects into the right-of-way.
9. The sign shall be erected or mounted in such a manner that building fenestration is not obscured, the architectural integrity of the building is not altered, and that no architectural features, historic fabric, fine ornaments, or distinctive or unique carvings shall be obscured, damaged, altered or destroyed, unless otherwise approved by the El Paso Historic Landmark Commission.
10. Signs shall not project into Texas Department of Transportation Right-of-Way.
(Ord. 16909 § 1 (part), 2008; Ord. 16761 § 1 (Exh. A) (part), 2007) (Ord. No. 18043, §§ 2, 3, 7-16-2013)
Source: City of El Paso, City Code and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/tx/el_paso/codes/code_of_ordinances?nodeId=TIT20ZO_CH20.18SIRE_ARTIVEMSIRE_20.18.470DIFetched: 10/28/2026
