§ 15-10-155 - INFORMATION REQUIRED FOR SIGNIFICANT INDUSTRIAL USER REPORTS.
The information listed in (1) through (11) of this section shall be submitted to the director for the reports required under Sections 15-10-153 (Baseline Monitoring Report from Existing Categorical User) and 15-10-154 (Baseline Monitoring Report from New Source Categorical User). The information listed in (5) through (11) of this section shall be submitted to the director for the reports required under Sections 15-10-157 (Categorical Pretreatment Standard Compliance) and 15-10-158 (Periodic Reports). Required information includes:
(1) the name and address of the facility;
(2) the name of the owner, operator, or manager of the facility;
(3) a list of environmental control permits held by or for the facility;
(4) a brief description of the nature, average rate of production, and standard industrial classification or North American Industry Classification System classification of the operation conducted by the user including a schematic process diagram that indicates points of discharge to the POTW from the regulated process;
(5) information showing the measured average daily and maximum daily flow in gallons per day to the POTW from regulated process and streams as necessary to allow use of the combined waste stream formula set out in 40 CFR Section 403.6(e);
(6) measurement of pollutants;
(7) identification of the categorical pretreatment standards applicable to the regulated process;
(8) sampling and analytical data representative of daily operations performed in accordance with approved methods. This shall include:
(a) identification of the nature and concentration or mass of regulated pollutants in the discharge from the regulated process if required by an applicable pretreatment standard or the director, including:
(i) instantaneous;
(ii) daily maximum; and
(iii) average concentration or mass;
(b) all sample records including:
(i) the date, exact place, method, and time of sampling and the names of the person or persons taking the samples;
(ii) the dates analyses were performed;
(iii) who performed the analyses;
(iv) the analytical techniques and methods used; and
(v) the results of such analyses;
(9) in cases where the pretreatment standard requires compliance with a best management practice or pollution prevention alternative, the user must submit documentation required by the director or the pretreatment standard necessary to demonstrate the compliance status of the user;
(10) a statement reviewed by its authorized representative and certified to by a qualified technician indicating:
(a) that the user meets pretreatment standards on a consistent basis; or
(b) if the user does not meet pretreatment standards, additional operation and maintenance or additional pretreatment necessary to meet the pretreatment standards and requirements; and
(11) a compliance schedule, if applicable.
Source: Ord. No. 20200729-002, Pt. 26, 8-10-20.